| /* |
| * Interface to SPI flash |
| * |
| * Copyright (C) 2008 Atmel Corporation |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| #ifndef _SPI_FLASH_H_ |
| #define _SPI_FLASH_H_ |
| |
| #include <stdint.h> |
| #include <stddef.h> |
| #include <spi-generic.h> |
| #include <boot/coreboot_tables.h> |
| |
| /* SPI Flash opcodes */ |
| #define SPI_OPCODE_WREN 0x06 |
| #define SPI_OPCODE_FAST_READ 0x0b |
| |
| struct spi_flash; |
| |
| /* |
| * Representation of SPI flash operations: |
| * read: Flash read operation. |
| * write: Flash write operation. |
| * erase: Flash erase operation. |
| * status: Read flash status register. |
| */ |
| struct spi_flash_ops { |
| int (*read)(const struct spi_flash *flash, u32 offset, size_t len, |
| void *buf); |
| int (*write)(const struct spi_flash *flash, u32 offset, size_t len, |
| const void *buf); |
| int (*erase)(const struct spi_flash *flash, u32 offset, size_t len); |
| int (*status)(const struct spi_flash *flash, u8 *reg); |
| }; |
| |
| struct spi_flash { |
| struct spi_slave spi; |
| const char *name; |
| u32 size; |
| u32 sector_size; |
| u32 page_size; |
| u8 erase_cmd; |
| u8 status_cmd; |
| const struct spi_flash_ops *ops; |
| }; |
| |
| void lb_spi_flash(struct lb_header *header); |
| |
| /* SPI Flash Driver Public API */ |
| |
| /* |
| * Probe for SPI flash chip on given SPI bus and chip select and fill info in |
| * spi_flash structure. |
| * |
| * Params: |
| * bus = SPI Bus # for the flash chip |
| * cs = Chip select # for the flash chip |
| * flash = Pointer to spi flash structure that needs to be filled |
| * |
| * Return value: |
| * 0 = success |
| * non-zero = error |
| */ |
| int spi_flash_probe(unsigned int bus, unsigned int cs, struct spi_flash *flash); |
| |
| /* |
| * Generic probing for SPI flash chip based on the different flashes provided. |
| * |
| * Params: |
| * spi = Pointer to spi_slave structure |
| * flash = Pointer to spi_flash structure that needs to be filled. |
| * |
| * Return value: |
| * 0 = success |
| * non-zero = error |
| */ |
| int spi_flash_generic_probe(const struct spi_slave *slave, |
| struct spi_flash *flash); |
| |
| /* All the following functions return 0 on success and non-zero on error. */ |
| int spi_flash_read(const struct spi_flash *flash, u32 offset, size_t len, |
| void *buf); |
| int spi_flash_write(const struct spi_flash *flash, u32 offset, size_t len, |
| const void *buf); |
| int spi_flash_erase(const struct spi_flash *flash, u32 offset, size_t len); |
| int spi_flash_status(const struct spi_flash *flash, u8 *reg); |
| /* |
| * Some SPI controllers require exclusive access to SPI flash when volatile |
| * operations like erase or write are being performed. In such cases, |
| * volatile_group_begin will gain exclusive access to SPI flash if not already |
| * acquired and volatile_group_end will end exclusive access if this was the |
| * last request in the group. spi_flash_{write,erase} operations call |
| * volatile_group_begin at the start of function and volatile_group_end after |
| * erase/write operation is performed. These functions can also be used by any |
| * components that wish to club multiple volatile operations into a single |
| * group. |
| */ |
| int spi_flash_volatile_group_begin(const struct spi_flash *flash); |
| int spi_flash_volatile_group_end(const struct spi_flash *flash); |
| |
| /* |
| * These are callbacks for marking the start and end of volatile group as |
| * handled by the chipset. Not every chipset requires this special handling. So, |
| * these functions are expected to be implemented in Kconfig option for volatile |
| * group is enabled (SPI_FLASH_HAS_VOLATILE_GROUP). |
| */ |
| int chipset_volatile_group_begin(const struct spi_flash *flash); |
| int chipset_volatile_group_end(const struct spi_flash *flash); |
| |
| /* Return spi_flash object reference for the boot device. This is only valid |
| * if CONFIG_BOOT_DEVICE_SPI_FLASH is enabled. */ |
| const struct spi_flash *boot_device_spi_flash(void); |
| |
| /* Protect a region of spi flash using its controller, if available. Returns |
| * < 0 on error, else 0 on success. */ |
| int spi_flash_ctrlr_protect_region(const struct spi_flash *flash, |
| const struct region *region); |
| |
| /* |
| * This function is provided to support spi flash command-response transactions. |
| * Only 2 vectors are supported and the 'func' is called with appropriate |
| * write and read buffers together. This can be used for chipsets that |
| * have specific spi flash controllers that don't conform to the normal |
| * spi xfer API because they are specialized controllers and not generic. |
| * |
| * Returns 0 on success and non-zero on failure. |
| */ |
| int spi_flash_vector_helper(const struct spi_slave *slave, |
| struct spi_op vectors[], size_t count, |
| int (*func)(const struct spi_slave *slave, const void *dout, |
| size_t bytesout, void *din, size_t bytesin)); |
| |
| #endif /* _SPI_FLASH_H_ */ |