| /* $NoKeywords:$ */ |
| /** |
| * @file |
| * |
| * mn.h |
| * |
| * Common Northbridge |
| * |
| * @xrefitem bom "File Content Label" "Release Content" |
| * @e project: AGESA |
| * @e sub-project: (Mem) |
| * @e \$Revision: 48803 $ @e \$Date: 2011-03-10 20:18:28 -0700 (Thu, 10 Mar 2011) $ |
| * |
| **/ |
| /* |
| ***************************************************************************** |
| * |
| * Copyright (c) 2011, Advanced Micro Devices, Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of Advanced Micro Devices, Inc. nor the names of |
| * its contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * *************************************************************************** |
| * |
| */ |
| |
| #ifndef _MN_H_ |
| #define _MN_H_ |
| |
| /*---------------------------------------------------------------------------- |
| * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS) |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| /*----------------------------------------------------------------------------- |
| * DEFINITIONS AND MACROS |
| * |
| *----------------------------------------------------------------------------- |
| */ |
| #define _4GB_RJ16 ((UINT32)4 << (30 - 16)) |
| #define DCT_ACCESS_WRITE (UINT32) 0x40000000 |
| #define MTRR_VALID 11 |
| #define THERMAL_OPT 31 |
| |
| #define NB_ACCESS 0 |
| #define DCT_PHY_ACCESS 1 |
| #define DCT_EXTRA 2 |
| |
| #define DCT_PHY_DIRECT 0xF1 |
| |
| #define VT_MSK_VALUE 0 |
| #define VT_ARRAY 1 |
| /*--------------------------------------------- |
| * TSEFO - Type Start End Function Offset |
| * |
| * 31:30 Type of access (2-bits) |
| * 29:29 Special (1-bit) |
| * 28:28 Phy Direct (1-bit) |
| * 27:27 Whole Register Access (1-bit) |
| * 26:26 Linked (1-bit) |
| * 25:21 Start bit (5-bits) |
| * 20:16 End bit (5-bits) |
| * 15:00 Function_Offset/Index (16-bits) |
| *--------------------------------------------- |
| */ |
| typedef UINT32 TSEFO; |
| |
| /** |
| MAKE_TSEFO(TableName, a, b, c, d, BitFieldIndex): |
| |
| @param[in] TableName |
| @param[in] BitFieldIndex |
| @param[in] a Type of access. |
| @param[in] b Index of register (can be in Function_Offset format). |
| @param[in] c Highest bit of the bit field. |
| @param[in] d Lowest bit of the bit field. |
| |
| @return TSEFO Access params encrypted in TSEFO format. |
| --*/ |
| #define MAKE_TSEFO(TableName, a, b, c, d, BitFieldIndex) \ |
| TableName[BitFieldIndex] = ( \ |
| (a == DCT_PHY_DIRECT) ? ( \ |
| (((UINT32) DCT_PHY_ACCESS) << 30) | (((UINT32) 1) << 28) | (((UINT32) b) & 0xFFFF) | (\ |
| ((c == 15) && (d == 0)) ? ( \ |
| (((UINT32) 1) << 27) | (((UINT32) b) & 0xF0000) \ |
| ) : ( \ |
| (c >= d) ? ( \ |
| (((UINT32) c) << 21) | (((UINT32) d) << 16) \ |
| ) : ( \ |
| (((UINT32) d) << 21) | (((UINT32) c) << 16) \ |
| ) \ |
| ) \ |
| ) \ |
| ) : ( \ |
| (((UINT32) a) << 30) | (((UINT32) b) & 0xFFFFFFF) | ( \ |
| (((UINT32) b) >> 16) ? ( \ |
| (((UINT32) 1) << 29) \ |
| ) : ( \ |
| (c >= d) ? ( \ |
| (((UINT32) c) << 21) | (((UINT32) d) << 16) \ |
| ) : ( \ |
| (((UINT32) d) << 21) | (((UINT32) c) << 16) \ |
| ) \ |
| ) \ |
| ) \ |
| ) \ |
| ) |
| |
| /** |
| LINK_TSEFO(TableName, LowerBitFieldIndex, HigherBitFieldIndex): |
| This is one way link: any write to LowerBitFieldIndex would write to HigherBitFieldIndex, |
| but NOT the other way around. |
| Requirement: LowerBitFieldIndex must be declared *right* before HigherBitFieldIndex. |
| |
| @param[in] TableName |
| @param[in] LowerBitFieldIndex |
| @param[in] HigherBitFieldIndex |
| |
| @return TSEFO Access params encrypted in TSEFO format. |
| --*/ |
| #define LINK_TSEFO(TableName, LowerBitFieldIndex, HigherBitFieldIndex) { \ |
| ASSERT (LowerBitFieldIndex == (HigherBitFieldIndex - 1)) ; \ |
| TableName[LowerBitFieldIndex] = TableName[LowerBitFieldIndex] | (((UINT32) 1) << 26); \ |
| } |
| |
| #define TSEFO_TYPE(x) ((UINT8) (((UINT32) (x) >> 30) & 0x03)) |
| #define TSEFO_START(x) ((UINT8) (((UINT32) (x) >> 21) & 0x1F)) |
| #define TSEFO_END(x) ((UINT8) (((UINT32) (x) >> 16) & 0x1F)) |
| #define TSEFO_OFFSET(x) ((UINT32) (x) & 0xFFFF) |
| #define TSEFO_LINKED(x) ((UINT8) (((UINT32) (x) >> 26) & 0x01)) |
| #define TSEFO_DIRECT_EN(x) ((UINT8) (((UINT32) (x) >> 28) & 0x01)) |
| #define TSEFO_WHOLE_REG_ACCESS(x) ((UINT8) (((UINT32) (x) >> 27) & 0x01)) |
| #define _FN(x, y) (((UINT32) (x) << 12) + (UINT32) (y)) |
| #define _NOT_USED_ 0 |
| |
| /* */ |
| #define B0_DLY 0 |
| #define B1_DLY 1 |
| #define B2_DLY 2 |
| #define B3_DLY 3 |
| #define B4_DLY 4 |
| #define B5_DLY 5 |
| #define B6_DLY 6 |
| #define B7_DLY 7 |
| #define ECC_DLY 8 |
| |
| #define DDR2_TRAIN_FLOW 0 |
| #define DDR3_TRAIN_FLOW 1 |
| |
| // |
| // Minimum Data Eye width in consecutive 32nds of a UI of |
| // valid data |
| // |
| #define MIN_RD_DATAEYE_WIDTH_NB 4 |
| #define MIN_WR_DATAEYE_WIDTH_NB 4 |
| |
| // |
| // RELIABLE READ/WRITE MODE DEFINITIONS |
| // |
| #define PRECHARGE_ALL_BANKS 0xFF ///< Use to specify PrechargeAll Command to Precharge Cmd Function |
| #define CMD_TGT_A 0x00 ///< Issue Commands to Command Target A |
| #define CMD_TGT_AB 0x01 ///< Issue Commands to Command Targets A and B |
| #define CMD_TYPE_READ 0x00 ///< Read Command |
| #define CMD_TYPE_WRITE 0x01 ///< Write Command |
| #define CMD_TYPE_WR_RD 0x02 ///< Alternating Write and Read Commands |
| #define CPG_BANK_ADDRESS_A 0x0 ///< Dimm Bank address used in Reliable RD/RW mode training |
| #define CPG_BANK_ADDRESS_B 0x1 ///< Dimm Bank address used in Reliable RD/RW mode training |
| #define CPG_ROW_ADDRESS_A 0x0 ///< Dimm Row address used in Reliable RD/RW mode training |
| #define CPG_ROW_ADDRESS_B 0x0 ///< Dimm Row address used in Reliable RD/RW mode training |
| #define CPG_COL_ADDRESS_A 0x0 ///< Dimm Column address used in Reliable RD/RW mode training |
| #define CPG_COL_ADDRESS_B 0x0 ///< Dimm Column address used in Reliable RD/RW mode training |
| #define CPG_COMPARE_MASK_LOW 0x00000000 ///< Dram DQMask[31:0] used to mask comparison on reads. 1=ignore |
| #define CPG_COMPARE_MASK_HI 0x00000000 ///< Dram DQMask[63:32] used to mask comparison on reads. 1=ignore |
| #define CPG_COMPARE_MASK_ECC 0x00 ///< Dram EccMask used to mask comparison on reads. 1=ignore |
| #define PRBS_SEED_32 0x062221 ///< Data PRBS Seed |
| #define PRBS_SEED_64 0x066665 ///< Data PRBS Seed |
| #define PRBS_SEED_128 0x026666 ///< Data PRBS Seed |
| #define PRBS_SEED_256 0x044443 ///< Data PRBS Seed |
| |
| |
| /*---------------------------------------------------------------------------- |
| * TYPEDEFS, STRUCTURES, ENUMS |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| /// Structure for Reliable Read/Write Mode Data |
| /// These are values that may need to be referenced by the low level functions |
| /// during training and are initialized at the begining of a particular type of training. |
| typedef struct _RRW_SETTINGS { |
| UINT8 CmdTgt; ///< Value to program into CmdTgt |
| UINT8 TgtBankAddressA; ///< Target A Bank address |
| UINT32 TgtRowAddressA; ///< Target A Row address |
| UINT32 TgtColAddressA; ///< Target A Column address |
| UINT8 TgtBankAddressB; ///< Target B Bank address |
| UINT32 TgtRowAddressB; ///< Target B Row address |
| UINT32 TgtColAddressB; ///< Target B Column address |
| UINT32 CompareMaskLow; ///< Compare Mask Bits 31:0 |
| UINT32 CompareMaskHigh; ///< Compare Mask Bits 63:32 |
| UINT8 CompareMaskEcc; ///< Compare Mask Ecc |
| UINT32 DataPrbsSeed; ///< PRBS Seed value |
| } RRW_SETTINGS; |
| |
| /// DQS training related delays |
| typedef enum { |
| AccessRcvEnDly, ///< Receiver enable delay |
| AccessWrDatDly, ///< Write data delay |
| AccessRdDqsDly, ///< Read DQS delay |
| AccessWrDqsDly, ///< Write DQS delay |
| AccessPhRecDly ///< Phase recovery delay |
| } TRN_DLY_TYPE; |
| |
| /// Training patterns for position training |
| typedef enum { |
| POS_PATTERN_72B, ///< 72 bit pattern |
| POS_PATTERN_256B, ///< 256 bit pattern |
| } POS_TRN_PATTERN_TYPE; |
| |
| /// ODT mode |
| typedef enum { |
| MISSION_MODE, ///< ODT during mission mode |
| WRITE_LEVELING_MODE ///< ODT during write leveling |
| } ODT_MODE; |
| |
| /* |
| * DRBN - Dimm-Rank-Byte-Nibble |
| * 31:12 Reserved |
| * 11:09 Dimm (3-bits) |
| * 08 Rank (1-bit) |
| * 07:05 Reserved |
| * 04:01 Byte (4-bits) |
| * 00 Nibble (1-bit) |
| */ |
| typedef UINT32 DRBN; |
| #define MAKE_DRBN(dimm, rank, byte, nibble) ((((UINT32) (dimm)) << 9) | (((UINT32) (rank)) << 8) | \ |
| (((UINT32) (byte)) << 1) | ((UINT32) (nibble)) ) |
| #define DIMM_BYTE_ACCESS(dimm, byte) ((((UINT32) (dimm)) << 9) | (((UINT32) (byte)) << 1)) |
| #define CS_NBBL_ACCESS(cs, nibble) ((((UINT32) (cs)) << 8) | ((UINT32) (nibble))) |
| #define DRBN_DIMM(x) ((UINT8) (((UINT32) (x) >> 9) & 0x07)) |
| #define DRBN_RANK(x) ((UINT8) (((UINT32) (x) >> 8) & 0x01)) |
| #define DRBN_BYTE(x) ((UINT8) (((UINT32) (x) >> 1) & 0x0F)) |
| #define DRBN_NBBL(x) ((UINT8) (((UINT32) (x)) & 0x01)) |
| |
| /* Dimm Type mask */ |
| #define DT_X4 0x01 |
| #define DT_X8 0x02 |
| #define DT_X16 0x04 |
| #define DT_SR 0x10 |
| #define DT_DR 0x20 |
| #define DT_QR 0x40 |
| |
| #define DT_ANY_X4 0x71 |
| #define DT_ANY_X8 0x72 |
| #define DT_ANY_X16 0x74 |
| #define DT_ANY_SR 0x17 |
| #define DT_ANY_DR 0x27 |
| #define DT_ANY_QR 0x47 |
| #define DT_ANY_SR_DR (DT_ANY_SR | DT_ANY_DR) |
| #define DT_ANY (DT_ANY_SR | DT_ANY_DR | DT_ANY_QR) |
| |
| /// Delay Scaling Info Struct - Describes number of delay increments per UI of a delay type |
| /// |
| typedef struct _TRN_DLY_PARMS { |
| UINT8 Min; ///< Minimum Value |
| UINT8 Max; ///< Maximum Value |
| UINT8 Mask; ///< Mask to be applied (i.e. 0xFF if adjustable by one, 0xFE if adjustable by 2, etc.) |
| } TRN_DLY_PARMS; |
| |
| /// Structure for certain data saving needed for DCT. |
| typedef struct { |
| UINT8 RcvEnDlyCounts[8]; ///< DQS Receiver Enable Delay counts |
| UINT32 PhRecReg[3]; ///< 3 Phase recovery control registers |
| } MEM_DCT_CACHE; |
| |
| /// Structure for table driven support. |
| typedef struct _MEM_TBL_ALIAS { |
| UINT8 time; ///< Modification time. |
| UINT8 node:4; ///< Node on which to make modification. |
| UINT8 dct:4; ///< DCT on which to make modification. |
| UINT8 dimm:4; ///< Dimm on which to make modification. |
| UINT8 attr:3; ///< Attribute of modification. |
| UINT8 vtype:1; ///< Flag indicating value type. |
| UINT32 bfindex; ///< Bit field index that need to be modified. |
| union { ///< Union is defined to easy select between single and multiple bytelane cases. |
| struct { ///< Sub-struct used for one bytelane value. |
| UINT16 bytelane:16; ///< Bytelane on which to make modification. |
| UINT32 value; ///< Modified value. |
| UINT8 reserved[3]; ///< Reserved for this purpose |
| } s; ///< single value to one or multiple bytelanes |
| UINT8 bytelanevalue[9]; ///< Array to specify individual bytelane values |
| } data; |
| } MEM_TABLE_ALIAS; |
| |
| /// Structure for Platform Specific Block. |
| typedef struct _MEM_PS_BLOCK { |
| UINT8 DramTerm; ///< Dram Term |
| UINT8 QR_DramTerm; ///< Dram Term for QR |
| UINT8 DynamicDramTerm; ///< Dynamic Dram Term |
| UINT8 NumOfReg[MAX_DIMMS_PER_CHANNEL]; ///< Number of registers on each RDIMM (From SPD) |
| UINT8 MR0WR; ///< MR0WR |
| UINT8 MR0CL31; ///< MR0[CL][3:1] |
| UINT8 MR0CL0; ///< MR0CL[0] |
| UINT8 RttNom[8]; ///< RttNom value for maximum 8 chipsels per channel |
| UINT8 RttWr[8]; ///< RttWr value for maximum 8 chipsels per channel |
| UINT8 F0RC8; ///< F0RC8 |
| UINT8 F1RC0; ///< F1RC0 |
| UINT8 F1RC1; ///< F1RC1 |
| UINT8 F1RC2; ///< F1RC2 |
| UINT8 RC10OpSpd; ///< RC10[OperatingSpeed] |
| UINT8 LrdimmRowAddrBits[MAX_DIMMS_PER_CHANNEL]; ///< Effective Row address bits used by LRDIMMS |
| /* PUBLIC functions */ |
| BOOLEAN (*MemPDoPs) (struct _MEM_NB_BLOCK *NBPtr); ///< Function that gets Form factor info. |
| VOID (*MemPGetPORFreqLimit) (struct _MEM_NB_BLOCK *NBPtr); ///< Function that gets the speed limit of a dimm population. |
| } MEM_PS_BLOCK; |
| |
| /// Structure parameters needed in frequency change of client NB. |
| typedef struct _MEM_FREQ_CHANGE_PARAM { |
| UINT16 PllLockTimeDefault; ///< Default PllLockTime |
| UINT8 RdPtrInit667orHigher; ///< RdPtrInit for frequency 667MHz and higher |
| UINT8 RdPtrInitLower667; ///< RdPtrInit for frequency lower than 667MHz |
| UINT8 NclkPeriodMul2x; ///< Multiplier for NclkPeriod in parial sum calculation x 2 |
| UINT8 MemClkPeriodMul2x; ///< Multiplier for MemClkPeriod in parial sum calculation x 2 |
| UINT8 SyncTimeMul4x; ///< Multiplier for SyncTime |
| UINT16 TDataProp800orHigher; ///< TDataProp for frequency 800MHz or higher |
| UINT16 TDataPropLower800; ///< TDataProp for frequency lower than 800MHz |
| } MEM_FREQ_CHANGE_PARAM; |
| |
| /// List for NB items that are supported |
| typedef enum { |
| SetSpareEn, ///< Sets spare enable |
| CheckSpareEn, ///< Spare enabled |
| SetDllShutDown, ///< Sets DllShutDown |
| CheckEccDLLPwrDnConfig, ///< Checks to determine if EccDLLPwrDnConf needs to be adjusted |
| DimmBasedOnSpeed, ///< Checks to determine if Dimm number needs to be adjusted based on speed |
| CheckMaxDramRate, ///< Checks to determine the maximum rate |
| Check1GAlign, ///< Checks to determine if 1 GB alignment is supported |
| DramModeBeforeDimmPres, ///< Check to determine if DRAM mode needs to be set before dimm presence |
| DramModeAfterDimmPres, ///< Check to determine if DRAM mode needs to be set after dimm presence |
| CheckClearOnDimmMirror, ///< Check to determine if we need to clear on DIMM mirror |
| CheckDisDllShutdownSR, ///< Check to determine if DisDllShutdown needs to be set |
| CheckMemClkCSPresent, ///< Check to determine if chipselect needs to be set based on disabled memclocks |
| CheckChangeAvgValue, ///< Check to determine if we need to change average value |
| CheckMaxRdDqsDlyPtr, ///< Check to determine change Max Rd Dqs Delay |
| CheckPhyFenceTraining, ///< Check to determine if we need to Phy Fence training |
| CheckGetMCTSysAddr, ///< Check to determine if we need to GetMCTSysAddr |
| CheckSendAllMRCmds, ///< Check to determine if we need to SendAllMRCmds |
| CheckFindPSOverideWithSocket, ///< Check to determine if we need to Find PSOveride With Socket |
| CheckFindPSDct, ///< Check to determine if we need to Find PSOveride With DCT |
| CheckODTControls, ///< Check to determine if we need to set ODT controls |
| CheckDummyCLRead, ///< Check to determine if an extra dummy read is required |
| CheckDllStdBy, ///< Check to determine if setting DLL stand by is required |
| CheckSlewWithMarginImprv, ///< Check to determine if setting of Slew With MarginImprv is required |
| CheckSlewWithoutMarginImprv, ///< Check to determine if setting of Slew Without MarginImprv is required |
| CheckDllSpeedUp, ///< Check to determine if setting of Dll SpeedUp is required |
| CheckDllRegDis, ///< Check to determine if setting of DLL Regulator Disable is required |
| FenceTrnBeforeDramInit, ///< Check to determine if fence training has been done before Dram init |
| WLSeedAdjust, ///< Check to determine if WL seed needs to be adjusted |
| UnifiedNbFence, ///< Check to determine if Phy fence is of Unified NB |
| AdjustTwr, ///< Check to determine if Twr needs to be adjusted |
| ChannelPDMode, ///< Check to determine if channel power down mode is the only that is supported |
| ForceEnMemHoleRemapping, ///< Check to determine if we need to force enabling memory hole remapping |
| AdjustTrdrdSD, ///< Check to determine if we need to adjust TrdrdSD |
| ReverseMaxRdLatTrain, ///< Check to determine if reverse (pass to fail) algorithm is supported for MaxRdLat training |
| SkipErrTrain, ///< Check to determine if skip error training is supported |
| DramSrHys, ///< Check to determine if DRAM SR hysteresis is supported |
| PchgPDMode, ///< Check to determine if Precharge powerdown mode is supported |
| EccByteTraining, ///< Check to determine if DRAM ECC Byte training |
| CheckDrvImpCtrl, ///< Check to determine if we need to set DrvImpCtrl |
| CheckDramTerm, ///< Check to determine if we need to set DramTerm |
| CheckDramTermDyn, ///< Check to determine if we need to set DramTermDyn |
| CheckQoff, ///< Check to determine if we need to set Qoff |
| CheckSetSameDctODTsEn, ///< Check to defermine if we need to set "ODTsEn" the same on each DCT |
| WLNegativeDelay, ///< Check to determine if the NB can tolerate a negtive WL delay value |
| SchedDlySlot1Extra, ///< Check to determine if DataTxSchedDly Slot1 equation in slowMode to subtract an extra MEMCLK |
| TwoStageDramInit, ///< Check to determine if we need to seperate Draminit into 2 stages. The first one processes info on all nodes. The second one does Dram Init. |
| AdjustTrc, ///< Check to determine if we need to adjust Trc |
| |
| EnumSize ///< Size of list |
| } NB_SUPPORTED; |
| |
| /// List for family specific functions that are supported |
| typedef enum { |
| BeforePhyFenceTraining, ///< Family specific tasks before Phy Fence Training |
| BeforeMemClkFreqVal, ///< hook before setting MemClkFreqVal bit |
| AfterMemClkFreqVal, ///< Override PllMult and PllDiv |
| OverridePllMult, ///< Override PllMult |
| OverridePllDiv, ///< Override PllDiv |
| BeforeMemClr, ///< Before MemClr |
| SendMrsCmdsPerCs, ///< Send MRS commands per CS |
| SetupHwTrainingEngine, ///< Setup Hardware training engine for specific training type |
| OverrideRcvEnSeed, ///< Override seed for hardware based RcvEn training |
| AddlMaxRdLatTrain, ///< Perform additional MaxRdLat training if needed |
| ForceAutoComp, ///< Force Auto Comp |
| DetectMemPllError, ///< Detect MemPll Divide by 3 bug |
| ReEnablePhyComp, ///< Re-Enable Phy Compensation after RcvEn Training |
| ExtractWLODT, ///< Extract WL ODT value thr given ODT pattern |
| DCTSelectSwitch, ///< Select DCT when we switch DCT |
| ScrubberErratum, ///< Erratum for setting scrubber rate |
| MR0_PPD, ///< Override MR0[PPD] |
| GetDdrMaxRate, ///< Interpret DdrMaxRate with Familiy-specific encoding |
| ExitPhyAssistedTraining, ///< Perform family specific tasks when exiting phy assisted training |
| AfterSaveRestore, ///< Action after save/restore execution |
| OverrideDataTxFifoWrDly, ///< Override DataTxFifoWrDly based on training result of WrDatDly |
| OverrideRcvEnSeedPassN, ///< Override seed for hardware based RcvEn training where N greater than 0 |
| AfterMemClkFreqChg, ///< Reprogram DIMMs' buffers after MEMCLK frequency change |
| AdjustTxpdll, ///< Adjust Txpdll value to encoded register value |
| CalcWrDqDqsEarly, ///< Calculate WrDqDqsEarly |
| TrainWlPerNibble, ///< Train Write Leveling per nibble |
| TrainWlPerNibbleAdjustWLDly, ///< Train WL per nibble and adjust the WL delay |
| TrainWlPerNibbleSeed, ///< Save the seed for WL nibble based training |
| TrainRxEnPerNibble, ///< Train Rx Enable Training per nibble |
| TrainRxEnAdjustDlyPerNibble, ///< Train Rx Enable Training nibble and adjust the RxEn delay |
| TrainRxEnGetAvgDlyPerNibble, ///< Display Rx Enable Training average nibble value for each BL |
| InitPerNibbleTrn, ///< Initiates Per Nibble Training. |
| BeforeSetCsTri, ///< Modify CS tri-state bit map. |
| ForceRdDqsPhaseB, ///< Force RdDqsDly to phase B |
| SetDqsODT, ///< Set DQS ODT |
| DisLowPwrDrvStr, ///< Hook to skip setting LowPowerDriveStrengthEn |
| AdjustRdDqsDlyOffset, ///< Adjust the bit offset of the RdDqsDly Bit Bitfield before writing and after reading |
| ResetRxFifoPtr, ///< Reset RxFifo pointer during Read DQS training |
| EnableParityAfterMemRst, ///< Enable DRAM Address Parity after memory reset. |
| FinalizeVDDIO, ///< Finalize VDDIO |
| BfAfExcludeDimm, ///< Workaround before and after excluding dimms |
| |
| NumberOfHooks ///< Size of list |
| } FAMILY_SPECIFIC_FUNC_INDEX; |
| |
| ///< Entry for SPD Timing |
| typedef struct { |
| BIT_FIELD_NAME BitField; ///< Bit field name of the timing |
| UINT8 Min; ///< Minimum value for timing |
| UINT8 Max; ///< Maximum value for timing |
| UINT8 Bias; ///< Bias from actual value |
| UINT8 Ratio_x2; ///< Actual value will be multiplied by (Ratio_x2/2) |
| } CTENTRY; |
| |
| /// Structure for northbridge block. |
| typedef struct _MEM_NB_BLOCK { |
| MEM_DATA_STRUCT *MemPtr; ///< Point to MEM_DATA_STRUCT. |
| MEM_PARAMETER_STRUCT *RefPtr; ///< Point to MEM_PARAMETER_STRUCT. |
| DIE_STRUCT *MCTPtr; ///< point to current Node's MCT struct |
| DCT_STRUCT *DCTPtr; ///< point to current Node's DCT struct |
| DCT_STRUCT *AllDCTPtr; ///< point to all Node's DCT structs |
| CH_DEF_STRUCT *ChannelPtr; ///< point to current channel data |
| SPD_DEF_STRUCT *SPDPtr; ///< Point to SPD data for current DCT. |
| struct _MEM_TECH_BLOCK *TechPtr; ///< point to technology block. |
| CONST struct _MEM_FEAT_BLOCK_NB *FeatPtr; ///< point to NB Specific feature block. |
| struct _MEM_SHARED_DATA *SharedPtr; ///< Pointer to Memory scratchpad area |
| SPD_DEF_STRUCT *AllNodeSPDPtr; ///< Point to SPD data for the system. |
| DIE_STRUCT *AllNodeMCTPtr; ///< point to all Node's MCT structs |
| UINT8 DimmToBeUsed; ///< Dimm to be used in recovery mode. |
| MEM_PS_BLOCK *PsPtr; ///< point to platform specific block |
| MEM_PS_BLOCK *PSBlock; ///< point to the first platform specific block on this node. |
| MEM_FREQ_CHANGE_PARAM *FreqChangeParam; ///< pointer to parameter of frequency change. |
| |
| PCI_ADDR PciAddr; ///< PCI address for this node |
| TSEFO NBRegTable[BFEndOfList]; ///< contains all bit field definitions |
| |
| UINT8 Node; ///< current node. |
| UINT8 Dct; ///< current DCT. |
| UINT8 Channel; ///< current channel. |
| UINT8 DctCount; ///< number of DCTs on the current NB. |
| UINT8 ChannelCount; ///< number of channels per DCT of the current NB. |
| UINT8 NodeCount; ///< number of Nodes supported |
| BOOLEAN Ganged; ///< mode for current MCT controller. |
| POS_TRN_PATTERN_TYPE PosTrnPattern; ///< specifies the pattern that should be used for position training. |
| BOOLEAN MemCleared; ///< memory clear flag. |
| UINT32 CPGInit; ///< continuous pattern generation flag. |
| UINT16 StartupSpeed; ///< startup speed for DDR3. |
| UINT16 RcvrEnDlyLimit; ///< maximum value that RcvrEnDly field can take. |
| UINT32 McaNbCtlReg; ///< reserve MCA reports. |
| UINT32 VarMtrrHiMsk; ///< variable MTRR mask for upper 32 bits. |
| UINT32 NBClkFreq; ///< Current NB Clock frequency |
| UINT8 DefDctSelIntLvAddr; ///< Default DctSelIntLvAddr |
| UINT8 TrainingSequenceIndex; ///< Index into the Training Sequence |
| RRW_SETTINGS RrwSettings; ///<Settings for Reliable Read/Write mode |
| |
| UINT16 MaxFreqVDDIO[VOLT1_25 + 1]; ///< Max Frequency each voltage supports. |
| |
| MEM_DCT_CACHE DctCache[MAX_CHANNELS_PER_SOCKET]; ///< Allocate space for MCT_DCT_CACHE. |
| MEM_DCT_CACHE *DctCachePtr; ///< pointer to current Node's Node struct |
| |
| /* Temporary storage */ |
| BOOLEAN ClToNbFlag; ///< is used to restore ClLinesToNbDis bit after memory |
| UINT8 NbFreqChgState; ///< is used as a state index in NB frequency change state machine |
| UINT32 NbPsCtlReg; ///< is used to save/restore NB Pstate control register |
| CONST UINT32 *RecModeDefRegArray; ///< points to an array of default register values that are set for recovery mode |
| |
| ///< Determines if code should be executed on a give NB |
| BOOLEAN IsSupported[EnumSize]; |
| BOOLEAN (*FamilySpecificHook[NumberOfHooks]) (struct _MEM_NB_BLOCK *NBPtr, VOID *OptParam); ///< This array of pointers point to |
| ///< family specific functions. |
| |
| /* PUBLIC functions */ |
| VOID (*SwitchDCT) (struct _MEM_NB_BLOCK *NBPtr, UINT8 DCT); ///< Switch to current DCT. |
| VOID (*SwitchChannel) (struct _MEM_NB_BLOCK *NBPtr, UINT8 Channel); ///< Switch to current channel. |
| VOID (*SetMaxLatency) (struct _MEM_NB_BLOCK *NBPtr, UINT16 MaxRcvEnDly); ///< Set Max Rd Latency. |
| VOID (*getMaxLatParams) (struct _MEM_NB_BLOCK *NBPtr, UINT16 MaxDlyForMaxRdLat, UINT16 *MinDly, UINT16 *MaxDly, UINT16 *DlyBias); ///< retrieves the Max latency parameters. |
| BOOLEAN (*GetSysAddr) (struct _MEM_NB_BLOCK *NBPtr, UINT8 Receiver, UINT32 *Addr); ///< Get system address for training dimm. |
| BOOLEAN (*RankEnabled) (struct _MEM_NB_BLOCK *NBPtr, UINT8 Receiver); ///< Check if a rank has been enabled. |
| BOOLEAN (*InitializeMCT) (struct _MEM_NB_BLOCK *NBPtr); ///< MCT initialization. |
| BOOLEAN (*FinalizeMCT) (struct _MEM_NB_BLOCK *NBPtr); ///< sets final values in BUCFG and BUCFG2. |
| BOOLEAN (*InitMCT) (struct _MEM_NB_BLOCK *NBPtr); ///< main entry call for memory initialization. |
| VOID (*SendMrsCmd) (struct _MEM_NB_BLOCK *NBPtr); ///< send MRS command. |
| VOID (*sendZQCmd) (struct _MEM_NB_BLOCK *NBPtr); ///< send ZQ command. |
| VOID (*TrainingFlow) (struct _MEM_NB_BLOCK *NBPtr); ///< Set the training flow control |
| VOID (*WritePattern) (struct _MEM_NB_BLOCK *NBPtr, UINT32 Address, UINT8 Pattern[], UINT16 ClCount); ///< Write training pattern. |
| VOID (*ReadPattern) (struct _MEM_NB_BLOCK *NBPtr, UINT8 Buffer[], UINT32 Address, UINT16 ClCount); ///< Read training pattern. |
| VOID (*GenHwRcvEnReads) (struct _MEM_NB_BLOCK *NBPtr, UINT32 Address); ///< generates a continuous burst of reads during HW RcvEn training. |
| UINT16 (*CompareTestPattern) (struct _MEM_NB_BLOCK *NBPtr, UINT8 Buffer[], UINT8 Pattern[], UINT16 ByteCount); ///< Compare training pattern. |
| UINT16 (*InsDlyCompareTestPattern) (struct _MEM_NB_BLOCK *NBPtr, UINT8 Buffer[], UINT8 Pattern[], UINT16 ByteCount); ///< Compare training pattern using 1 beat offset to check for insertion delay |
| BOOLEAN (*StitchMemory) (struct _MEM_NB_BLOCK *NBPtr); ///< combines all the memory into a contiguous map. |
| VOID (*ProgramCycTimings) (struct _MEM_NB_BLOCK *NBPtr); ///< programs the memory controller with SPD timings. |
| BOOLEAN (*AutoConfig) (struct _MEM_NB_BLOCK *NBPtr); ///< programs the memory controller with configuration parameters |
| BOOLEAN (*PlatformSpec) (struct _MEM_NB_BLOCK *NBPtr); ///< programs platform specific parameters. |
| VOID (*DisableDCT) (struct _MEM_NB_BLOCK *NBPtr); ///< disable a DCT if no dimm presents. |
| VOID (*StartupDCT) (struct _MEM_NB_BLOCK *NBPtr); ///< start a DCT. |
| VOID (*SyncTargetSpeed) (struct _MEM_NB_BLOCK *NBPtr); ///< Check and sync the target speed of all channels of this node. |
| VOID (*ChangeFrequency) (struct _MEM_NB_BLOCK *NBPtr); ///< Frequency change sequence. |
| BOOLEAN (*RampUpFrequency) (struct _MEM_NB_BLOCK *NBPtr); ///< Change frequency to the next supported level. |
| BOOLEAN (*ChangeNbFrequency) (struct _MEM_NB_BLOCK *NBPtr); ///< Change NB frequency. |
| VOID (*PhyFenceTraining) (struct _MEM_NB_BLOCK *NBPtr); ///< Phy fence training. |
| BOOLEAN (*SyncDctsReady) (struct _MEM_NB_BLOCK *NBPtr); ///< Synchronize DCTs. |
| BOOLEAN (*HtMemMapInit) (struct _MEM_NB_BLOCK *NBPtr); ///< Memory map initialization. |
| VOID (*SyncAddrMapToAllNodes) (struct _MEM_NB_BLOCK *NBPtr); ///< copies the Node 0 map to all the other nodes. |
| BOOLEAN (*CpuMemTyping) (struct _MEM_NB_BLOCK *NBPtr); ///< MTRR and TOM setting. |
| VOID (*BeforeDqsTraining) (struct _MEM_NB_BLOCK *NBPtr); ///< processes needed before DQS training. |
| VOID (*AfterDqsTraining) (struct _MEM_NB_BLOCK *NBPtr); ///< processes needed after DQS training. |
| BOOLEAN (*OtherTiming) (struct _MEM_NB_BLOCK *NBPtr); ///< setting non-spd timing. |
| VOID (*UMAMemTyping) (struct _MEM_NB_BLOCK *NBPtr); ///< MTRR and TOM setting needed for UMA platform. |
| VOID (*Feature) (struct _MEM_NB_BLOCK *NBPtr); ///< Feature support. |
| UINT8 (*GetSocketRelativeChannel) (struct _MEM_NB_BLOCK *NBPtr, UINT8 Dct, UINT8 Channel); ///< Get channel number relative to a socket. |
| VOID (*SetDramOdtRec) (struct _MEM_NB_BLOCK *NBPtr, ODT_MODE OdtMode, UINT8 ChipSelect, UINT8 TargetCS); ///< Set Dram ODT. |
| UINT32 (*GetSysAddrRec) (VOID); ///< Get system address for training. |
| VOID (*SwitchNodeRec) (struct _MEM_NB_BLOCK *NBPtr, UINT8 NodeID); ///< Switch to current node. |
| VOID (*TechBlockSwitch) (struct _MEM_NB_BLOCK *NBPtr); ///< Selects appropriate Tech functions for the NB. |
| VOID (*SetEccSymbolSize) (struct _MEM_NB_BLOCK *NBPtr); ///< Set Ecc Symbol Size. |
| VOID (*GetTrainDlyParms) (struct _MEM_NB_BLOCK *NBPtr, TRN_DLY_TYPE TrnDly, TRN_DLY_PARMS *Parms); ///< Retrieve Specific Delay range info for current NB under current conditions. |
| AGESA_STATUS (*TrainingPatternInit) (struct _MEM_NB_BLOCK *NBPtr); ///< Initialize the training Pattern |
| AGESA_STATUS (*TrainingPatternFinalize) (struct _MEM_NB_BLOCK *NBPtr); ///< Finalize the training Pattern |
| BOOLEAN (*GetApproximateWriteDatDelay) (struct _MEM_NB_BLOCK *NBPtr, UINT8 Index, UINT8 *Value); ///< Retrieve the next WrDat Delay Approximation |
| UINT8 (*CSPerChannel) (struct _MEM_NB_BLOCK *NBPtr); ///< Return number of CS per channel. |
| UINT8 (*CSPerDelay) (struct _MEM_NB_BLOCK *NBPtr); ///< Return number of CS controlled per set of delay registers. |
| VOID (*FlushPattern) (struct _MEM_NB_BLOCK *NBPtr, UINT32 Address, UINT16 ClCount); ///<Flush the training pattern |
| UINT8 (*MinDataEyeWidth) (struct _MEM_NB_BLOCK *NBPtr); ///<Get Min Data Eye Width in 32nds of a UI |
| VOID (*MemNCapSpeedBatteryLife) (struct _MEM_NB_BLOCK *NBPtr); ///< Caps speed based on battery life check. |
| UINT32 (*GetUmaSize) (struct _MEM_NB_BLOCK *NBPtr); ///< Get Uma Size |
| UINT8 (*GetMemClkFreqId) (struct _MEM_NB_BLOCK *NBPtr, UINT16 Speed); ///< Translate MemClk frequency in MHz to MemClkFreq value |
| VOID (*EnableSwapIntlvRgn) (struct _MEM_NB_BLOCK *NBPtr, UINT32 Base, UINT32 Limit); ///< Enable swapped interleaving region |
| BOOLEAN (*ChangeNbFrequencyWrap) (struct _MEM_NB_BLOCK *NBPr, UINT32 NBPstate); ///< Wrapper for NB Pstate change function |
| VOID (*WaitXMemClks) (struct _MEM_NB_BLOCK *NBPr, UINT32 MemClkCount); ///< Waits a specified number of MemClks |
| VOID (*ProgramNbPsDependentRegs) (struct _MEM_NB_BLOCK *NBPtr); ///< Programs NB Pstate dependent registers |
| VOID (*AllocateC6Storage) (struct _MEM_NB_BLOCK *NBPtr); ///< Allocates DRAM region for Core C6 |
| |
| /* PUBLIC Get/Set register field functions */ |
| UINT32 (*GetBitField) (struct _MEM_NB_BLOCK *NBPtr, BIT_FIELD_NAME FieldName); ///< Pci register bit field read. |
| VOID (*SetBitField) (struct _MEM_NB_BLOCK *NBPtr, BIT_FIELD_NAME FieldName, UINT32 Value); ///< Pci register bit field write. |
| BOOLEAN (*BrdcstCheck) (struct _MEM_NB_BLOCK *NBPtr, BIT_FIELD_NAME FieldName, UINT32 Value); ///< Pci register bit field broadcast read. |
| VOID (*BrdcstSet) (struct _MEM_NB_BLOCK *NBPtr, BIT_FIELD_NAME FieldName, UINT32 Value); ///< Pci register bit field broadcast write. |
| VOID (*PollBitField) (struct _MEM_NB_BLOCK *NBPtr, BIT_FIELD_NAME FieldName, UINT32 Field, UINT32 MicroSecond, BOOLEAN IfBroadCast); ///< Poll a Pci register bitfield. |
| UINT32 (*GetTrainDly) (struct _MEM_NB_BLOCK *NBPtr, TRN_DLY_TYPE TrnDly, DRBN DrbnVar); ///< Training register bit field read. |
| VOID (*SetTrainDly) (struct _MEM_NB_BLOCK *NBPtr, TRN_DLY_TYPE TrnDly, DRBN DrbnVar, UINT16 Value); ///< Training register bit field write. |
| AGESA_STATUS (*InitRecovery) (struct _MEM_NB_BLOCK *NBPtr); ///< Recover mode memory init |
| VOID (*MemRecNInitializeMctNb) (struct _MEM_NB_BLOCK *NBPtr); ///< Initialize MCT changes |
| VOID (*MemRecNFinalizeMctNb) (struct _MEM_NB_BLOCK *NBPtr); ///< Finalize MCT changes |
| VOID (*MemNInitPhyComp) (struct _MEM_NB_BLOCK *NBPtr); ///< Init Phy compensation |
| VOID (*MemNBeforeDramInitNb) (struct _MEM_NB_BLOCK *NBPtr); ///< Before Dram init |
| BOOLEAN (*MemNIsIdSupportedNb) (struct _MEM_NB_BLOCK *NBPtr, CPU_LOGICAL_ID *LogicalIdPtr); ///< Determines if a given CPU id is supported |
| BOOLEAN (*InitNBRegTableNb) (struct _MEM_NB_BLOCK *NBPtr, TSEFO NBRegTable[]); ///< Initializes register table |
| BOOLEAN (*MemNPlatformSpecificFormFactorInitNb) (struct _MEM_NB_BLOCK *NBPtr); ///< Platform specific functions |
| VOID (*MemNSetOtherTimingNb) (struct _MEM_NB_BLOCK *NBPtr); ///< Set non-spd timings |
| VOID (*MemNBeforePlatformSpecNb) (struct _MEM_NB_BLOCK *NBPtr); ///< Apply settings prior to platform specific settings |
| UINT32 (*MemNCmnGetSetFieldNb) (struct _MEM_NB_BLOCK *NBPtr, UINT8 IsSet, BIT_FIELD_NAME FieldName, UINT32 Field); ///< Sets a register value |
| UINT32 (*MemNcmnGetSetTrainDly) (struct _MEM_NB_BLOCK *NBPtr, UINT8 IsSet, TRN_DLY_TYPE TrnDly, DRBN DrbnVar, UINT16 Field); ///< Sets a training delay field |
| VOID (*MemPPhyFenceTrainingNb) (struct _MEM_NB_BLOCK *NBPtr); ///< Phy Fence training |
| VOID (*MemPNodeMemBoundaryNb) (struct _MEM_NB_BLOCK *NBPtr, UINT32 *NodeSysLimit); ///< Phy Fence training |
| UINT32 (*MemRecNCmnGetSetFieldNb) (struct _MEM_NB_BLOCK *NBPtr, UINT8 IsSet, BIT_FIELD_NAME FieldName, UINT32 Field); ///< This functions sets bit fields in recover mode |
| UINT32 (*MemRecNcmnGetSetTrainDlyNb) (struct _MEM_NB_BLOCK *NBPtr, UINT8 IsSet, TRN_DLY_TYPE TrnDly, DRBN DrbnVar, UINT16 Field); ///< This functions sets bit fields in recover mode |
| VOID (*MemRecNSwitchDctNb) (struct _MEM_NB_BLOCK *NBPtr, UINT8 NodeID); ///< S3 Exit self refresh register |
| VOID (*MemNPFenceAdjustNb) (struct _MEM_NB_BLOCK *NBPtr, UINT16 *Value16); ///< Adjust Avg PRE value of Phy fence training |
| VOID (*MemNPrepareRcvrEnDlySeed) (struct _MEM_NB_BLOCK *NBPtr); ///< Seed valude for HW RxEn training |
| UINT8 (*MemNGetDramTerm) (struct _MEM_NB_BLOCK *NBPtr, UINT8 ChipSel); ///< Dram Term value |
| UINT8 (*MemNGetDynDramTerm) (struct _MEM_NB_BLOCK *NBPtr, UINT8 ChipSel); ///< Dynamic Dram Term value |
| UINT32 (*MemNGetMR0CL) (struct _MEM_NB_BLOCK *NBPtr); ///< MR0[CL] value |
| UINT32 (*MemNGetMR0WR) (struct _MEM_NB_BLOCK *NBPtr); ///< MR0[WR] value |
| UINT32 (*MemNGetMR2CWL) (struct _MEM_NB_BLOCK *NBPtr); ///< MR2[CWL] value |
| |
| } MEM_NB_BLOCK; |
| |
| /*---------------------------------------------------------------------------- |
| * FUNCTIONS PROTOTYPE |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| VOID |
| MemNInitNBDataNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNSwitchDCTNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN UINT8 Dct |
| ); |
| |
| VOID |
| MemNSwitchChannelNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN UINT8 Channel |
| ); |
| |
| UINT32 |
| MemNGetBitFieldNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN BIT_FIELD_NAME FieldName |
| ); |
| |
| VOID |
| MemNSetBitFieldNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN BIT_FIELD_NAME FieldName, |
| IN UINT32 Field |
| ); |
| |
| BOOLEAN |
| MemNBrdcstCheckNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN BIT_FIELD_NAME FieldName, |
| IN UINT32 Field |
| ); |
| |
| VOID |
| MemNBrdcstSetNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN BIT_FIELD_NAME FieldName, |
| IN UINT32 Field |
| ); |
| |
| |
| UINT32 |
| MemNGetTrainDlyNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN TRN_DLY_TYPE TrnDly, |
| IN DRBN DrbnVar |
| ); |
| |
| VOID |
| MemNSetTrainDlyNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN TRN_DLY_TYPE TrnDly, |
| IN DRBN DrbnVar, |
| IN UINT16 Field |
| ); |
| |
| BOOLEAN |
| MemNRankEnabledNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN UINT8 Receiver |
| ); |
| |
| UINT8 MemNGetSocketRelativeChannelNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN UINT8 Dct, |
| IN UINT8 Channel |
| ); |
| |
| VOID |
| MemNPhyFenceTrainingNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| BOOLEAN |
| MemNGetMCTSysAddrNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN UINT8 Receiver, |
| OUT UINT32 *AddrPtr |
| ); |
| |
| BOOLEAN |
| MemNPlatformSpecNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| BOOLEAN |
| MemNStitchMemoryNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNDisableDCTNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNDisableDCTClientNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNStartupDCTNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNStartupDCTUnb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNChangeFrequencyNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| BOOLEAN |
| MemNRampUpFrequencyNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNProgramCycTimingsNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNGetMaxLatParamsNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN UINT16 MaxRcvEnDly, |
| IN OUT UINT16 *MinDlyPtr, |
| IN OUT UINT16 *MaxDlyPtr, |
| IN OUT UINT16 *DlyBiasPtr |
| ); |
| |
| UINT16 |
| MemNTotalSyncComponentsNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNSetMaxLatencyNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN UINT16 MaxRcvEnDly |
| ); |
| |
| VOID |
| MemNSendZQCmdNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNSwapBitsNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNSwapBitsUnb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNTrainPhyFenceNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNInitPhyCompNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNGetTrainDlyParmsNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN TRN_DLY_TYPE TrnDly, |
| IN OUT TRN_DLY_PARMS *Parms |
| ); |
| |
| |
| VOID |
| MemNGetTrainDlyParmsClientNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN TRN_DLY_TYPE TrnDly, |
| IN OUT TRN_DLY_PARMS *Parms |
| ); |
| |
| VOID |
| MemNBeforeDQSTrainingNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| UINT32 |
| MemNcmnGetSetTrainDlyNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN UINT8 IsSet, |
| IN TRN_DLY_TYPE TrnDly, |
| IN DRBN DrbnVar, |
| IN UINT16 Field |
| ); |
| |
| UINT32 |
| MemNcmnGetSetTrainDlyClientNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN UINT8 IsSet, |
| IN TRN_DLY_TYPE TrnDly, |
| IN DRBN DrbnVar, |
| IN UINT16 Field |
| ); |
| |
| VOID |
| MemNSyncTargetSpeedNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| BOOLEAN |
| MemNSyncDctsReadyNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| BOOLEAN |
| MemNHtMemMapInitNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| UINT8 |
| MemNGetTrdrdNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| UINT8 |
| MemNGetTwrwrNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| UINT8 |
| MemNGetTwrrdNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| UINT8 |
| MemNGetTrwtTONb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| UINT8 |
| MemNGetTrwtWBNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNPowerDownCtlNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| BOOLEAN |
| MemNCPUMemTypingNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNUMAMemTypingNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNSyncAddrMapToAllNodesNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| BOOLEAN |
| MemNInitMCTNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNTechBlockSwitchNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| UINT32 |
| MemRecNGetBitFieldNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN BIT_FIELD_NAME FieldName |
| ); |
| |
| VOID |
| MemRecNSetBitFieldNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN BIT_FIELD_NAME FieldName, |
| IN UINT32 Field |
| ); |
| |
| UINT32 |
| MemRecNGetTrainDlyNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN TRN_DLY_TYPE TrnDly, |
| IN DRBN DrbnVar |
| ); |
| |
| VOID |
| MemRecNSetTrainDlyNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN TRN_DLY_TYPE TrnDly, |
| IN DRBN DrbnVar, |
| IN UINT16 Field |
| ); |
| |
| BOOLEAN |
| MemRecNAutoConfigNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| BOOLEAN |
| MemRecNPlatformSpecNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemRecNStartupDCTNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemRecNSetMaxLatencyNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN UINT16 MaxRcvEnDly |
| ); |
| |
| VOID |
| MemRecNSetDramOdtNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN ODT_MODE OdtMode, |
| IN UINT8 ChipSelect, |
| IN UINT8 TargetCS |
| ); |
| |
| VOID |
| MemRecNSendMrsCmdNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| |
| VOID |
| MemRecNSendZQCmdNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemRecNContReadPatternClientNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN UINT8 Buffer[], |
| IN UINT32 Address, |
| IN UINT16 ClCount |
| ); |
| |
| AGESA_STATUS |
| MemRecNMemInitNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemRecNCPUMemRecTypingNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| UINT32 |
| MemRecNGetMCTSysAddrNb ( |
| VOID |
| ); |
| |
| UINT32 |
| MemRecGetVarMtrrHiMsk ( |
| IN CPU_LOGICAL_ID *LogicalIdPtr, |
| IN AMD_CONFIG_PARAMS *StdHeader |
| ); |
| |
| INT8 |
| MemNGetOptimalCGDDNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN TRN_DLY_TYPE TrnDly1, |
| IN TRN_DLY_TYPE TrnDly2 |
| ); |
| |
| VOID |
| MemNPollBitFieldNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN BIT_FIELD_NAME FieldName, |
| IN UINT32 Field, |
| IN UINT32 MicroSecond, |
| IN BOOLEAN IfBroadCast |
| ); |
| |
| VOID |
| MemNSetEccSymbolSizeNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| BOOLEAN |
| MemNDQSTiming3Nb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| BOOLEAN |
| MemNDQSTiming2Nb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| BOOLEAN |
| MemNTrainingFlowNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNRecTrainingFlowNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNRecTrainingFlowClientNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| UINT32 |
| MemRecNTotalSyncComponentsClientNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemRecNStartupDCTClientNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| |
| VOID |
| MemRecNPhyVoltageLevelNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemRecNPhyFenceTrainingNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| AGESA_STATUS |
| MemNTrainingPatternInitNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| BOOLEAN |
| MemNGetApproximateWriteDatDelayNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN UINT8 Index, |
| IN OUT UINT8 *Value |
| ); |
| |
| AGESA_STATUS |
| MemNTrainingPatternFinalizeNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNFlushPatternNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN UINT32 Address, |
| IN UINT16 ClCount |
| ); |
| |
| UINT8 |
| MemNCSPerChannelNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| UINT8 |
| MemNCSPerDelayNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| UINT8 |
| MemNMinDataEyeWidthNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| UINT16 |
| MemNCompareTestPatternNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN UINT8 Buffer[], |
| IN UINT8 Pattern[], |
| IN UINT16 ByteCount |
| ); |
| |
| UINT16 |
| MemNInsDlyCompareTestPatternNb ( |
| IN MEM_NB_BLOCK *NBPtr, |
| IN UINT8 Buffer[], |
| IN UINT8 Pattern[], |
| IN UINT16 ByteCount |
| ); |
| |
| |
| UINT32 |
| MemNGetUmaSizeNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| BOOLEAN |
| MemNSetMTRRUmaRegionUCNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN UINT32 *BasePtr, |
| IN OUT UINT32 *LimitPtr |
| ); |
| |
| UINT8 |
| MemNGetMemClkFreqIdNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN UINT16 Speed |
| ); |
| |
| UINT8 |
| MemNGetMemClkFreqIdClientNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN UINT16 Speed |
| ); |
| |
| UINT8 |
| MemNGetMemClkFreqIdUnb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN UINT16 Speed |
| ); |
| |
| UINT16 |
| MemNGetMemClkFreqUnb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN UINT8 FreqId |
| ); |
| |
| BOOLEAN |
| MemNGetPlatformCfgNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| BOOLEAN |
| MemNPlatformSpecUnb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNProgramPlatformSpecNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNProgramCycTimingsClientNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| INT16 |
| MemNCalcCDDNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN TRN_DLY_TYPE TrnDlyType1, |
| IN TRN_DLY_TYPE TrnDlyType2, |
| IN BOOLEAN SameDimm, |
| IN BOOLEAN DiffDimm |
| ); |
| |
| VOID |
| MemNChangeFrequencyUnb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNProgramNbPstateDependentRegistersClientNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNAllocateC6StorageClientNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNAllocateC6StorageUnb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNPhyVoltageLevelNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNPhyFenceTrainingUnb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNPFenceAdjustUnb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN OUT UINT16 *Value16 |
| ); |
| |
| VOID |
| MemNInitPhyCompClientNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| UINT32 |
| MemNTotalSyncComponentsClientNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNEnableSwapIntlvRgnNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN UINT32 Base, |
| IN UINT32 Limit |
| ); |
| |
| VOID |
| MemNPhyPowerSavingClientNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNSetASRSRTNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNPrepareRcvrEnDlySeedNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| BOOLEAN |
| MemNChangeNbFrequencyUnb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| BOOLEAN |
| MemNChangeNbFrequencyNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| VOID |
| MemNWaitXMemClksNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN UINT32 MemClkCount |
| ); |
| |
| BOOLEAN |
| memNSequenceDDR3Nb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| UINT16 |
| GetTrainDlyFromHeapNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN TRN_DLY_TYPE TrnDlyType, |
| IN DRBN Drbn |
| ); |
| |
| BOOLEAN |
| MemNTrainingFlowUnb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| BOOLEAN |
| MemNSetupHwTrainingEngineUnb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN VOID* OptParam |
| ); |
| |
| BOOLEAN |
| MemNBeforePhyFenceTrainingClientNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN OUT VOID *OptParam |
| ); |
| |
| BOOLEAN |
| MemNReEnablePhyCompNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN OUT VOID *OptParam |
| ); |
| |
| UINT8 |
| MemNGetDramTermNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN UINT8 ChipSel |
| ); |
| |
| UINT8 |
| MemNGetDynDramTermNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN UINT8 ChipSel |
| ); |
| |
| UINT32 |
| MemNGetMR0CLNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| UINT32 |
| MemNGetMR0WRNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| UINT32 |
| MemNGetMR2CWLNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| BOOLEAN |
| MemNDctCfgSelectUnb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN VOID *Dct |
| ); |
| |
| BOOLEAN |
| MemNGetMaxDdrRateUnb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN VOID *DdrMaxRate |
| ); |
| |
| BOOLEAN |
| MemRecNReEnablePhyCompNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN OUT VOID *OptParam |
| ); |
| |
| UINT32 |
| MemRecNcmnGetSetTrainDlyClientNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN UINT8 IsSet, |
| IN TRN_DLY_TYPE TrnDly, |
| IN DRBN DrbnVar, |
| IN UINT16 Field |
| ); |
| |
| VOID |
| MemNSetTxpNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr |
| ); |
| |
| BOOLEAN |
| MemNAdjustTxpdllClientNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN OUT VOID *OptParam |
| ); |
| |
| BOOLEAN |
| MemNCalcWrDqDqsEarlyUnb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN OUT VOID *OptParam |
| ); |
| |
| VOID |
| MemNGetTrainDlyParmsUnb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN TRN_DLY_TYPE TrnDly, |
| IN OUT TRN_DLY_PARMS *Parms |
| ); |
| |
| BOOLEAN |
| MemNBfAfExcludeDimmClientNb ( |
| IN OUT MEM_NB_BLOCK *NBPtr, |
| IN OUT VOID *IsBefore |
| ); |
| |
| #endif /* _MN_H_ */ |