| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2008-2009 coresystems GmbH |
| * Copyright (C) 2014 Google Inc. |
| * Copyright (C) 2017 Intel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <bootstate.h> |
| #include <chip.h> |
| #include <console/console.h> |
| #include <device/device.h> |
| #include <intelblocks/pmc.h> |
| #include <intelblocks/pmclib.h> |
| #include <intelblocks/rtc.h> |
| #include <soc/pci_devs.h> |
| #include <soc/pm.h> |
| |
| /* |
| * Set which power state system will be after reapplying |
| * the power (from G3 State) |
| */ |
| static void pmc_set_afterg3(struct device *dev, int s5pwr) |
| { |
| uint8_t reg8; |
| |
| reg8 = pci_read_config8(dev, GEN_PMCON_B); |
| |
| switch (s5pwr) { |
| case MAINBOARD_POWER_STATE_OFF: |
| reg8 |= 1; |
| break; |
| case MAINBOARD_POWER_STATE_ON: |
| reg8 &= ~1; |
| break; |
| case MAINBOARD_POWER_STATE_PREVIOUS: |
| default: |
| break; |
| } |
| |
| pci_write_config8(dev, GEN_PMCON_B, reg8); |
| } |
| |
| /* |
| * Set PMC register to know which state system should be after |
| * power reapplied |
| */ |
| void pmc_soc_restore_power_failure(void) |
| { |
| pmc_set_afterg3(PCH_DEV_PMC, |
| pmc_get_mainboard_power_failure_state_choice()); |
| } |
| |
| static void config_deep_sX(uint32_t offset, uint32_t mask, int sx, int enable) |
| { |
| uint32_t reg; |
| uint8_t *pmcbase = pmc_mmio_regs(); |
| |
| printk(BIOS_DEBUG, "%sabling Deep S%c\n", |
| enable ? "En" : "Dis", sx + '0'); |
| reg = read32(pmcbase + offset); |
| if (enable) |
| reg |= mask; |
| else |
| reg &= ~mask; |
| write32(pmcbase + offset, reg); |
| } |
| |
| static void config_deep_s5(int on_ac, int on_dc) |
| { |
| /* Treat S4 the same as S5. */ |
| config_deep_sX(S4_PWRGATE_POL, S4AC_GATE_SUS, 4, on_ac); |
| config_deep_sX(S4_PWRGATE_POL, S4DC_GATE_SUS, 4, on_dc); |
| config_deep_sX(S5_PWRGATE_POL, S5AC_GATE_SUS, 5, on_ac); |
| config_deep_sX(S5_PWRGATE_POL, S5DC_GATE_SUS, 5, on_dc); |
| } |
| |
| static void config_deep_s3(int on_ac, int on_dc) |
| { |
| config_deep_sX(S3_PWRGATE_POL, S3AC_GATE_SUS, 3, on_ac); |
| config_deep_sX(S3_PWRGATE_POL, S3DC_GATE_SUS, 3, on_dc); |
| } |
| |
| static void config_deep_sx(uint32_t deepsx_config) |
| { |
| uint32_t reg; |
| uint8_t *pmcbase = pmc_mmio_regs(); |
| |
| reg = read32(pmcbase + DSX_CFG); |
| reg &= ~DSX_CFG_MASK; |
| reg |= deepsx_config; |
| write32(pmcbase + DSX_CFG, reg); |
| } |
| |
| static void pch_power_options(struct device *dev) |
| { |
| const char *state; |
| |
| /* Get the chip configuration */ |
| int pwr_on = pmc_get_mainboard_power_failure_state_choice(); |
| |
| /* |
| * Which state do we want to goto after g3 (power restored)? |
| * 0 == S5 Soft Off |
| * 1 == S0 Full On |
| * 2 == Keep Previous State |
| */ |
| switch (pwr_on) { |
| case MAINBOARD_POWER_STATE_OFF: |
| state = "off"; |
| break; |
| case MAINBOARD_POWER_STATE_ON: |
| state = "on"; |
| break; |
| case MAINBOARD_POWER_STATE_PREVIOUS: |
| state = "state keep"; |
| break; |
| default: |
| state = "undefined"; |
| } |
| pmc_set_afterg3(dev, pwr_on); |
| printk(BIOS_INFO, "Set power %s after power failure.\n", state); |
| |
| /* Set up GPE configuration. */ |
| pmc_gpe_init(); |
| } |
| |
| static void pmc_init(void *unused) |
| { |
| device_t dev = PCH_DEV_PMC; |
| config_t *config = dev->chip_info; |
| |
| rtc_init(); |
| |
| /* Initialize power management */ |
| pch_power_options(dev); |
| |
| pmc_set_acpi_mode(); |
| |
| config_deep_s3(config->deep_s3_enable_ac, config->deep_s3_enable_dc); |
| config_deep_s5(config->deep_s5_enable_ac, config->deep_s5_enable_dc); |
| config_deep_sx(config->deep_sx_config); |
| } |
| |
| /* |
| * Initialize PMC controller. |
| * |
| * PMC controller gets hidden from PCI bus during FSP-Silicon init call. |
| * Hence PCI enumeration can't be used to initialize bus device and |
| * allocate resources. |
| */ |
| BOOT_STATE_INIT_ENTRY(BS_DEV_INIT_CHIPS, BS_ON_EXIT, pmc_init, NULL); |