| /* SPDX-License-Identifier: GPL-2.0-or-later */ |
| |
| #include <acpi/acpi.h> |
| #include <acpi/acpigen.h> |
| #include <amdblocks/acpimmio.h> |
| #include <amdblocks/amd_pci_util.h> |
| #include <baseboard/variants.h> |
| #include <device/device.h> |
| #include <gpio.h> |
| #include <soc/acpi.h> |
| #include <variant/ec.h> |
| #include <vendorcode/google/chromeos/chromeos.h> |
| |
| #define BACKLIGHT_GPIO GPIO_129 |
| #define METHOD_BACKLIGHT_ENABLE "\\_SB.BKEN" |
| #define METHOD_BACKLIGHT_DISABLE "\\_SB.BKDS" |
| #define METHOD_MAINBOARD_INI "\\_SB.MINI" |
| #define METHOD_MAINBOARD_WAK "\\_SB.MWAK" |
| #define METHOD_MAINBOARD_PTS "\\_SB.MPTS" |
| |
| /* |
| * These arrays set up the FCH PCI_INTR registers 0xC00/0xC01. |
| * This table is responsible for physically routing the PIC and |
| * IOAPIC IRQs to the different PCI devices on the system. It |
| * is read and written via registers 0xC00/0xC01 as an |
| * Index/Data pair. These values are chipset and mainboard |
| * dependent and should be updated accordingly. |
| */ |
| static uint8_t fch_pic_routing[0x80]; |
| static uint8_t fch_apic_routing[0x80]; |
| |
| _Static_assert(sizeof(fch_pic_routing) == sizeof(fch_apic_routing), |
| "PIC and APIC FCH interrupt tables must be the same size"); |
| |
| /* |
| * This controls the device -> IRQ routing. |
| * |
| * Hardcoded IRQs: |
| * 0: timer < soc/amd/common/acpi/lpc.asl |
| * 1: i8042 - Keyboard |
| * 2: cascade |
| * 8: rtc0 <- soc/amd/common/acpi/lpc.asl |
| * 9: acpi <- soc/amd/common/acpi/lpc.asl |
| */ |
| static const struct fch_irq_routing { |
| uint8_t intr_index; |
| uint8_t pic_irq_num; |
| uint8_t apic_irq_num; |
| } guybrush_fch[] = { |
| { PIRQ_A, 12, PIRQ_NC }, |
| { PIRQ_B, 14, PIRQ_NC }, |
| { PIRQ_C, 15, PIRQ_NC }, |
| { PIRQ_D, 12, PIRQ_NC }, |
| { PIRQ_E, 14, PIRQ_NC }, |
| { PIRQ_F, 15, PIRQ_NC }, |
| { PIRQ_G, 12, PIRQ_NC }, |
| { PIRQ_H, 14, PIRQ_NC }, |
| |
| { PIRQ_SCI, ACPI_SCI_IRQ, ACPI_SCI_IRQ }, |
| { PIRQ_SD, PIRQ_NC, PIRQ_NC }, |
| { PIRQ_SDIO, PIRQ_NC, PIRQ_NC }, |
| { PIRQ_SATA, PIRQ_NC, PIRQ_NC }, |
| { PIRQ_EMMC, PIRQ_NC, PIRQ_NC }, |
| { PIRQ_GPIO, 11, 11 }, |
| { PIRQ_I2C0, 10, 10 }, |
| { PIRQ_I2C1, 7, 7 }, |
| { PIRQ_I2C2, 6, 6 }, |
| { PIRQ_I2C3, 5, 5 }, |
| { PIRQ_UART0, 4, 4 }, |
| { PIRQ_UART1, 3, 3 }, |
| |
| /* The MISC registers are not interrupt numbers */ |
| { PIRQ_MISC, 0xfa, 0x00 }, |
| { PIRQ_MISC0, 0x91, 0x00 }, |
| { PIRQ_HPET_L, 0x00, 0x00 }, |
| { PIRQ_HPET_H, 0x00, 0x00 }, |
| }; |
| |
| static void init_tables(void) |
| { |
| const struct fch_irq_routing *entry; |
| int i; |
| |
| memset(fch_pic_routing, PIRQ_NC, sizeof(fch_pic_routing)); |
| memset(fch_apic_routing, PIRQ_NC, sizeof(fch_apic_routing)); |
| |
| for (i = 0; i < ARRAY_SIZE(guybrush_fch); i++) { |
| entry = guybrush_fch + i; |
| fch_pic_routing[entry->intr_index] = entry->pic_irq_num; |
| fch_apic_routing[entry->intr_index] = entry->apic_irq_num; |
| } |
| } |
| |
| static void pirq_setup(void) |
| { |
| intr_data_ptr = fch_apic_routing; |
| picr_data_ptr = fch_pic_routing; |
| } |
| |
| static void mainboard_configure_gpios(void) |
| { |
| size_t base_num_gpios, override_num_gpios; |
| const struct soc_amd_gpio *base_gpios, *override_gpios; |
| |
| base_gpios = variant_base_gpio_table(&base_num_gpios); |
| override_gpios = variant_override_gpio_table(&override_num_gpios); |
| |
| gpio_configure_pads_with_override(base_gpios, base_num_gpios, override_gpios, |
| override_num_gpios); |
| } |
| |
| static void mainboard_init(void *chip_info) |
| { |
| mainboard_configure_gpios(); |
| mainboard_ec_init(); |
| } |
| |
| static void mainboard_write_blken(void) |
| { |
| acpigen_write_method(METHOD_BACKLIGHT_ENABLE, 0); |
| acpigen_soc_clear_tx_gpio(BACKLIGHT_GPIO); |
| acpigen_pop_len(); |
| } |
| |
| static void mainboard_write_blkdis(void) |
| { |
| acpigen_write_method(METHOD_BACKLIGHT_DISABLE, 0); |
| acpigen_soc_set_tx_gpio(BACKLIGHT_GPIO); |
| acpigen_pop_len(); |
| } |
| |
| static void mainboard_write_mini(void) |
| { |
| acpigen_write_method(METHOD_MAINBOARD_INI, 0); |
| acpigen_emit_namestring(METHOD_BACKLIGHT_ENABLE); |
| acpigen_pop_len(); |
| } |
| |
| static void mainboard_write_mwak(void) |
| { |
| acpigen_write_method(METHOD_MAINBOARD_WAK, 0); |
| acpigen_emit_namestring(METHOD_BACKLIGHT_ENABLE); |
| acpigen_pop_len(); |
| } |
| |
| static void mainboard_write_mpts(void) |
| { |
| acpigen_write_method(METHOD_MAINBOARD_PTS, 0); |
| acpigen_emit_namestring(METHOD_BACKLIGHT_DISABLE); |
| acpigen_pop_len(); |
| } |
| |
| static void mainboard_fill_ssdt(const struct device *dev) |
| { |
| mainboard_write_blken(); |
| mainboard_write_blkdis(); |
| mainboard_write_mini(); |
| mainboard_write_mpts(); |
| mainboard_write_mwak(); |
| } |
| |
| static void mainboard_enable(struct device *dev) |
| { |
| printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); |
| |
| dev->ops->acpi_inject_dsdt = chromeos_dsdt_generator; |
| dev->ops->acpi_fill_ssdt = mainboard_fill_ssdt; |
| |
| init_tables(); |
| /* Initialize the PIRQ data structures for consumption */ |
| pirq_setup(); |
| |
| /* TODO: b/184678786 - Move into espi_config */ |
| /* Unmask eSPI IRQ 1 (Keyboard) */ |
| pm_write32(PM_ESPI_INTR_CTRL, PM_ESPI_DEV_INTR_MASK & ~(BIT(1))); |
| } |
| |
| struct chip_operations mainboard_ops = { |
| .init = mainboard_init, |
| .enable_dev = mainboard_enable, |
| }; |