lenovo/t520: fix devicetree
SATA Port documentation
PCIe unused ports and documentation
T520 have no keyboard backlight
Change-Id: I517ff8519ea22a9a7a9b6e3136efd15d4a0f8fc4
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/6743
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
diff --git a/src/mainboard/lenovo/t520/devicetree.cb b/src/mainboard/lenovo/t520/devicetree.cb
index 475e49c..c911d99 100644
--- a/src/mainboard/lenovo/t520/devicetree.cb
+++ b/src/mainboard/lenovo/t520/devicetree.cb
@@ -34,6 +34,7 @@
device domain 0 on
device pci 00.0 on end # host bridge
+ device pci 01.0 on end # NVIDIA Corporation GF119M [NVS 4200M]
device pci 02.0 on end # vga controller
chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
@@ -54,7 +55,7 @@
register "gpi1_routing" = "2"
register "gpi8_routing" = "2"
- # Enable SATA ports 0
+ # Enable SATA ports 0 (HDD bay) & 1 (ODD bay) & 2 (mSATA) & 3 (eSATA) & 4 (dock)
register "sata_port_map" = "0x1f"
# Set max SATA speed to 6.0 Gb/s
register "sata_interface_speed_support" = "0x3"
@@ -73,11 +74,14 @@
device pci 19.0 on end # Intel Gigabit Ethernet
device pci 1a.0 on end # USB2 EHCI #2
device pci 1b.0 on end # High Definition Audio
- device pci 1c.0 on end # PCIe Port #1
+ device pci 1c.0 off end # PCIe Port #1
device pci 1c.1 on end # PCIe Port #2 Integrated Wireless LAN
- device pci 1c.2 off end
- device pci 1c.3 on end # PCIe Port #3 Express Card
- device pci 1c.4 on end # PCIe Port #4 MMC/SDXC + IEEE1394
+ device pci 1c.2 off end # PCIe Port #3
+ device pci 1c.3 on end # PCIe Port #4 Express Card
+ device pci 1c.4 on end # PCIe Port #5 MMC/SDXC + IEEE1394
+ device pci 1c.5 off end # PCIe Port #6 Intel Ethernet PHY
+ device pci 1c.6 off end # PCIe Port #7 USB 3.0 only W520
+ device pci 1c.7 off end # PCIe Port #8
device pci 1d.0 on end # USB2 EHCI #1
device pci 1f.0 on #LPC bridge
chip ec/lenovo/pmh7
@@ -100,8 +104,6 @@
register "config2" = "0xa0"
register "config3" = "0xc2"
- register "has_keyboard_backlight" = "1"
-
register "beepmask0" = "0x00"
register "beepmask1" = "0x86"
register "has_power_management_beeps" = "0"