src/mainboard/intel/kblrvp/variants/rvp7/overridetree.cb

chip soc/intel/skylake

	register "SataPortsEnable" = "{
		[0] = 1,
		[1] = 1,
		[2] = 1,
	}"

	# Enable deep Sx states
	register "deep_s5_enable_ac" = "1"
	register "deep_s5_enable_dc" = "1"

	# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
	register "gen2_dec" = "0x000c0201"

	# VR Settings Configuration for 4 Domains
	#+----------------+-------+-------+-------+-------+
	#| Domain/Setting |  SA   |  IA   | GTUS  |  GTS  |
	#+----------------+-------+-------+-------+-------+
	#| Psi1Threshold  | 20A   | 20A   | 20A   | 20A   |
	#| Psi2Threshold  | 5A    | 5A    | 5A    | 5A    |
	#| Psi3Threshold  | 1A    | 1A    | 1A    | 1A    |
	#| Psi3Enable     | 1     | 1     | 1     | 1     |
	#| Psi4Enable     | 1     | 1     | 1     | 1     |
	#| ImonSlope      | 0     | 0     | 0     | 0     |
	#| ImonOffset     | 0     | 0     | 0     | 0     |
	#| IccMax         | Auto  | Auto  | Auto  | Auto  |
	#| VrVoltageLimit*| 0     | 0     | 0     | 0     |
	#+----------------+-------+-------+-------+-------+
	#* VrVoltageLimit command not sent.

	register "domain_vr_config[VR_SYSTEM_AGENT]" = "{
		.vr_config_enable = 1,
		.psi1threshold = VR_CFG_AMP(20),
		.psi2threshold = VR_CFG_AMP(5),
		.psi3threshold = VR_CFG_AMP(1),
		.psi3enable = 1,
		.psi4enable = 1,
		.imon_slope = 0,
		.imon_offset = 0,
		.icc_max = 0,
		.voltage_limit = 0
	}"

	register "domain_vr_config[VR_IA_CORE]" = "{
		.vr_config_enable = 1,
		.psi1threshold = VR_CFG_AMP(20),
		.psi2threshold = VR_CFG_AMP(5),
		.psi3threshold = VR_CFG_AMP(1),
		.psi3enable = 1,
		.psi4enable = 1,
		.imon_slope = 0,
		.imon_offset = 0,
		.icc_max = 0,
		.voltage_limit = 0
	}"

	register "domain_vr_config[VR_GT_UNSLICED]" = "{
		.vr_config_enable = 1,
		.psi1threshold = VR_CFG_AMP(20),
		.psi2threshold = VR_CFG_AMP(5),
		.psi3threshold = VR_CFG_AMP(1),
		.psi3enable = 1,
		.psi4enable = 1,
		.imon_slope = 0,
		.imon_offset = 0,
		.icc_max = 0,
		.voltage_limit = 0
	}"

	register "domain_vr_config[VR_GT_SLICED]" = "{
		.vr_config_enable = 1,
		.psi1threshold = VR_CFG_AMP(20),
		.psi2threshold = VR_CFG_AMP(5),
		.psi3threshold = VR_CFG_AMP(1),
		.psi3enable = 1,
		.psi4enable = 1,
		.imon_slope = 0,
		.imon_offset = 0,
		.icc_max = 0,
		.voltage_limit = 0
	}"

	# Enable Root ports.
	register "PcieRpEnable[2]" = "1"
	register "PcieRpEnable[3]" = "1"
	register "PcieRpEnable[4]" = "1"
	register "PcieRpEnable[5]" = "1"
	register "PcieRpEnable[8]" = "1"

	# Enable CLKREQ#
	register "PcieRpClkReqSupport[2]" = "1"
	register "PcieRpClkReqSupport[3]" = "1"
	register "PcieRpClkReqSupport[4]" = "1"
	register "PcieRpClkReqSupport[5]" = "1"
	register "PcieRpClkReqSupport[8]" = "1"

	# RP 3 uses SRCCLKREQ5#
	register "PcieRpClkReqNumber[2]" = "5"
	register "PcieRpClkReqNumber[3]" = "2"
	register "PcieRpClkReqNumber[4]" = "3"
	register "PcieRpClkReqNumber[5]" = "4"
	register "PcieRpClkReqNumber[8]" = "1"

	# RP 3 uses CLK SRC 5#
	register "PcieRpClkSrcNumber[2]" = "5"
	# RP 4 uses CLK SRC 2#
	register "PcieRpClkSrcNumber[3]" = "2"
	# RP 5 uses CLK SRC 3#
	register "PcieRpClkSrcNumber[4]" = "3"
	# RP 6 uses CLK SRC 4#
	register "PcieRpClkSrcNumber[5]" = "4"
	# RP 9 uses CLK SRC 1#
	register "PcieRpClkSrcNumber[8]" = "1"


	register "SerialIoDevMode" = "{
		[PchSerialIoIndexI2C0]  = PchSerialIoPci,
		[PchSerialIoIndexI2C1]  = PchSerialIoPci,
		[PchSerialIoIndexI2C2]  = PchSerialIoDisabled,
		[PchSerialIoIndexI2C3]  = PchSerialIoDisabled,
		[PchSerialIoIndexI2C4]  = PchSerialIoPci,
		[PchSerialIoIndexI2C5]  = PchSerialIoDisabled,
		[PchSerialIoIndexSpi0]  = PchSerialIoDisabled,
		[PchSerialIoIndexSpi1]  = PchSerialIoDisabled,
		[PchSerialIoIndexUart0] = PchSerialIoPci,
		[PchSerialIoIndexUart1] = PchSerialIoDisabled,
		[PchSerialIoIndexUart2] = PchSerialIoSkipInit,
	}"

	# Use default SD card detect GPIO configuration
	register "sdcard_cd_gpio" = "GPP_G5"

	device domain 0 on
		device ref south_xhci on
			register "usb2_ports" = "{
				[0] = USB2_PORT_MAX(OC0),	/* TYPE-A Port */
				[1] = USB2_PORT_MAX(OC2),	/* TYPE-A Port */
				[2] = USB2_PORT_MAX(OC_SKIP),	/* Bluetooth */
				[4] = USB2_PORT_MAX(OC1),	/* Type-A Port */
				[5] = USB2_PORT_MAX(OC_SKIP),	/* TYPE-A Port */
				[6] = USB2_PORT_MAX(OC2),	/* TYPE-A Port */
				[7] = USB2_PORT_MAX(OC2),	/* TYPE-A Port */
				[8] = USB2_PORT_MAX(OC_SKIP),	/* TYPE-A Port */
				[9] = USB2_PORT_MAX(OC_SKIP),	/* TYPE-A Port */
				[10] = USB2_PORT_MAX(OC_SKIP),	/* TYPE-A Port */
				[11] = USB2_PORT_MAX(OC_SKIP),	/* TYPE-A Port */
			}"

			register "usb3_ports" = "{
				[0] = USB3_PORT_DEFAULT(OC0),		/* TYPE-A Port */
				[1] = USB3_PORT_DEFAULT(OC_SKIP),	/* TYPE-A Port */
				[2] = USB3_PORT_DEFAULT(OC_SKIP),	/* TYPE-A Port */
				[3] = USB3_PORT_DEFAULT(OC1),		/* TYPE-A Port */
				[4] = USB3_PORT_DEFAULT(OC2),		/* TYPE-A Port */
				[5] = USB3_PORT_DEFAULT(OC_SKIP),	/* TYPE-A Port */
			}"
		end
		device ref i2c2		off end
		device ref i2c3		off end
		device ref sata		on  end
		device ref pcie_rp3	on  end
		device ref pcie_rp4	on  end
		device ref pcie_rp5	on  end
		device ref pcie_rp6	on  end
		device ref lpc_espi	on
			chip drivers/pc80/tpm
				device pnp 0c31.0 on end
			end
		end
	end
end