| chip soc/intel/skylake |
| |
| # GPE configuration |
| register "gpe0_dw0" = "GPP_C" |
| |
| # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f |
| register "gen2_dec" = "0x000c0201" |
| |
| # FSP Configuration |
| register "DspEnable" = "1" |
| |
| # VR Settings Configuration for 4 Domains |
| #+----------------+-------+-------+-------+-------+ |
| #| Domain/Setting | SA | IA | GTUS | GTS | |
| #+----------------+-------+-------+-------+-------+ |
| #| Psi1Threshold | 20A | 20A | 20A | 20A | |
| #| Psi2Threshold | 5A | 5A | 5A | 5A | |
| #| Psi3Threshold | 1A | 1A | 1A | 1A | |
| #| Psi3Enable | 1 | 1 | 1 | 1 | |
| #| Psi4Enable | 1 | 1 | 1 | 1 | |
| #| ImonSlope | 0 | 0 | 0 | 0 | |
| #| ImonOffset | 0 | 0 | 0 | 0 | |
| #| IccMax | 7A | 34A | 35A | 35A | |
| #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | |
| #+----------------+-------+-------+-------+-------+ |
| register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ |
| .vr_config_enable = 1, |
| .psi1threshold = VR_CFG_AMP(20), |
| .psi2threshold = VR_CFG_AMP(5), |
| .psi3threshold = VR_CFG_AMP(1), |
| .psi3enable = 1, |
| .psi4enable = 1, |
| .imon_slope = 0, |
| .imon_offset = 0, |
| .icc_max = VR_CFG_AMP(7), |
| .voltage_limit = 1520 |
| }" |
| |
| # Enable Root ports. |
| # PCIE Port 1 x4 -> SLOT1 |
| register "PcieRpEnable[0]" = "1" |
| register "PcieRpClkReqSupport[0]" = "1" |
| register "PcieRpClkReqNumber[0]" = "2" |
| # RP1, uses CLK SRC 2 |
| register "PcieRpClkSrcNumber[0]" = "2" |
| |
| # PCIE Port 5 x1 -> SLOT2/LAN |
| register "PcieRpEnable[4]" = "1" |
| register "PcieRpClkReqSupport[4]" = "1" |
| register "PcieRpClkReqNumber[4]" = "3" |
| # RP5, uses CLK SRC 3 |
| register "PcieRpClkSrcNumber[4]" = "3" |
| |
| # PCIE Port 6 x1 -> SLOT3 |
| register "PcieRpEnable[5]" = "1" |
| register "PcieRpClkReqSupport[5]" = "1" |
| register "PcieRpClkReqNumber[5]" = "1" |
| # RP6, uses CLK SRC 1 |
| register "PcieRpClkSrcNumber[5]" = "1" |
| |
| # PCIE Port 7 Disabled |
| # PCIE Port 8 Disabled |
| # PCIE Port 9 x1 -> WLAN |
| register "PcieRpEnable[8]" = "1" |
| register "PcieRpClkReqSupport[8]" = "1" |
| register "PcieRpClkReqNumber[8]" = "5" |
| # RP9, uses CLK SRC 5 |
| register "PcieRpClkSrcNumber[8]" = "5" |
| |
| # PCIE Port 10 x1 -> WiGig |
| register "PcieRpEnable[9]" = "1" |
| register "PcieRpClkReqSupport[9]" = "1" |
| register "PcieRpClkReqNumber[9]" = "4" |
| # RP10, uses CLK SRC 4 |
| register "PcieRpClkSrcNumber[9]" = "4" |
| |
| |
| register "SsicPortEnable" = "1" # Enable SSIC for WWAN |
| |
| # Must leave UART0 enabled or SD/eMMC will not work as PCI |
| register "SerialIoDevMode" = "{ |
| [PchSerialIoIndexI2C0] = PchSerialIoPci, |
| [PchSerialIoIndexI2C1] = PchSerialIoPci, |
| [PchSerialIoIndexI2C2] = PchSerialIoPci, |
| [PchSerialIoIndexI2C3] = PchSerialIoPci, |
| [PchSerialIoIndexI2C4] = PchSerialIoPci, |
| [PchSerialIoIndexI2C5] = PchSerialIoDisabled, |
| [PchSerialIoIndexSpi0] = PchSerialIoDisabled, |
| [PchSerialIoIndexSpi1] = PchSerialIoDisabled, |
| [PchSerialIoIndexUart0] = PchSerialIoPci, |
| [PchSerialIoIndexUart1] = PchSerialIoDisabled, |
| [PchSerialIoIndexUart2] = PchSerialIoSkipInit, |
| }" |
| |
| device domain 0 on |
| device ref south_xhci on |
| register "usb2_ports" = "{ |
| [0] = USB2_PORT_MAX(OC0), /* TYPE-A Port */ |
| [1] = USB2_PORT_MAX(OC2), /* TYPE-A Port */ |
| [2] = USB2_PORT_MAX(OC_SKIP), /* Bluetooth */ |
| [4] = USB2_PORT_MAX(OC_SKIP), /* Type-A Port */ |
| [5] = USB2_PORT_MAX(OC2), /* TYPE-A Port */ |
| [6] = USB2_PORT_MAX(OC_SKIP), /* TYPE-A Port */ |
| [7] = USB2_PORT_MAX(OC_SKIP), /* TYPE-A Port */ |
| [8] = USB2_PORT_MAX(OC_SKIP), /* TYPE-A Port */ |
| [9] = USB2_PORT_MAX(OC1), /* TYPE-A Port */ |
| [10] = USB2_PORT_MAX(OC_SKIP), /* TYPE-A Port */ |
| [11] = USB2_PORT_MAX(OC_SKIP), /* TYPE-A Port */ |
| }" |
| |
| register "usb3_ports" = "{ |
| [0] = USB3_PORT_DEFAULT(OC0), /* TYPE-A Port */ |
| [1] = USB3_PORT_DEFAULT(OC_SKIP), /* TYPE-A Port */ |
| [2] = USB3_PORT_DEFAULT(OC_SKIP), /* TYPE-A Port */ |
| [3] = USB3_PORT_DEFAULT(OC1), /* TYPE-A Port */ |
| }" |
| end |
| device ref imgu on end |
| device ref cio on end |
| device ref pcie_rp1 on end # x4 SLOT1 |
| device ref pcie_rp5 on end # x1 SLOT2/LAN |
| device ref pcie_rp6 on end # x1 SLOT3 |
| device ref pcie_rp9 on end # x1 WLAN |
| device ref pcie_rp10 on end # x1 WIGIG |
| device ref lpc_espi on |
| chip drivers/pc80/tpm |
| device pnp 0c31.0 on end |
| end |
| end |
| device ref hda on end |
| end |
| end |