| /* |
| * This file is part of the coreboot project. |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <console/cbmem_console.h> |
| #include <console/console.h> |
| #include <security/tpm/tspi.h> |
| #include <security/tpm/tss.h> |
| #if CONFIG(VBOOT) |
| #include <vb2_api.h> |
| #include <vb2_sha.h> |
| #include <assert.h> |
| #endif |
| |
| #if CONFIG(TPM1) |
| static uint32_t tpm1_invoke_state_machine(void) |
| { |
| uint8_t disabled; |
| uint8_t deactivated; |
| uint32_t result = TPM_SUCCESS; |
| |
| /* Check that the TPM is enabled and activated. */ |
| result = tlcl_get_flags(&disabled, &deactivated, NULL); |
| if (result != TPM_SUCCESS) { |
| printk(BIOS_ERR, "TPM: Can't read capabilities.\n"); |
| return result; |
| } |
| |
| if (disabled) { |
| printk(BIOS_INFO, "TPM: is disabled. Enabling...\n"); |
| |
| result = tlcl_set_enable(); |
| if (result != TPM_SUCCESS) { |
| printk(BIOS_ERR, "TPM: Can't set enabled state.\n"); |
| return result; |
| } |
| } |
| |
| if (!!deactivated != CONFIG(TPM_DEACTIVATE)) { |
| printk(BIOS_INFO, |
| "TPM: Unexpected TPM deactivated state. Toggling...\n"); |
| result = tlcl_set_deactivated(!deactivated); |
| if (result != TPM_SUCCESS) { |
| printk(BIOS_ERR, |
| "TPM: Can't toggle deactivated state.\n"); |
| return result; |
| } |
| |
| deactivated = !deactivated; |
| result = TPM_E_MUST_REBOOT; |
| } |
| |
| return result; |
| } |
| #endif |
| |
| static uint32_t tpm_setup_s3_helper(void) |
| { |
| uint32_t result; |
| |
| result = tlcl_resume(); |
| switch (result) { |
| case TPM_SUCCESS: |
| break; |
| |
| case TPM_E_INVALID_POSTINIT: |
| /* |
| * We're on a platform where the TPM maintains power |
| * in S3, so it's already initialized. |
| */ |
| printk(BIOS_INFO, "TPM: Already initialized.\n"); |
| result = TPM_SUCCESS; |
| break; |
| |
| default: |
| printk(BIOS_ERR, "TPM: Resume failed (%#x).\n", result); |
| break; |
| } |
| |
| return result; |
| } |
| |
| static uint32_t tpm_setup_epilogue(uint32_t result) |
| { |
| if (result != TPM_SUCCESS) |
| post_code(POST_TPM_FAILURE); |
| else |
| printk(BIOS_INFO, "TPM: setup succeeded\n"); |
| |
| return result; |
| } |
| |
| /* |
| * tpm_setup starts the TPM and establishes the root of trust for the |
| * anti-rollback mechanism. tpm_setup can fail for three reasons. 1 A bug. |
| * 2 a TPM hardware failure. 3 An unexpected TPM state due to some attack. In |
| * general we cannot easily distinguish the kind of failure, so our strategy is |
| * to reboot in recovery mode in all cases. The recovery mode calls tpm_setup |
| * again, which executes (almost) the same sequence of operations. There is a |
| * good chance that, if recovery mode was entered because of a TPM failure, the |
| * failure will repeat itself. (In general this is impossible to guarantee |
| * because we have no way of creating the exact TPM initial state at the |
| * previous boot.) In recovery mode, we ignore the failure and continue, thus |
| * giving the recovery kernel a chance to fix things (that's why we don't set |
| * bGlobalLock). The choice is between a knowingly insecure device and a |
| * bricked device. |
| * |
| * As a side note, observe that we go through considerable hoops to avoid using |
| * the STCLEAR permissions for the index spaces. We do this to avoid writing |
| * to the TPM flashram at every reboot or wake-up, because of concerns about |
| * the durability of the NVRAM. |
| */ |
| uint32_t tpm_setup(int s3flag) |
| { |
| uint32_t result; |
| |
| result = tlcl_lib_init(); |
| if (result != TPM_SUCCESS) { |
| printk(BIOS_ERR, "TPM: Can't initialize.\n"); |
| return tpm_setup_epilogue(result); |
| } |
| |
| /* Handle special init for S3 resume path */ |
| if (s3flag) { |
| printk(BIOS_INFO, "TPM: Handle S3 resume.\n"); |
| return tpm_setup_epilogue(tpm_setup_s3_helper()); |
| } |
| |
| result = tlcl_startup(); |
| if (CONFIG(TPM_STARTUP_IGNORE_POSTINIT) |
| && result == TPM_E_INVALID_POSTINIT) { |
| printk(BIOS_DEBUG, "TPM: ignoring invalid POSTINIT\n"); |
| result = TPM_SUCCESS; |
| } |
| if (result != TPM_SUCCESS) { |
| printk(BIOS_ERR, "TPM: Can't run startup command.\n"); |
| return tpm_setup_epilogue(result); |
| } |
| |
| result = tlcl_assert_physical_presence(); |
| if (result != TPM_SUCCESS) { |
| /* |
| * It is possible that the TPM was delivered with the physical |
| * presence command disabled. This tries enabling it, then |
| * tries asserting PP again. |
| */ |
| result = tlcl_physical_presence_cmd_enable(); |
| if (result != TPM_SUCCESS) { |
| printk(BIOS_ERR, "TPM: Can't enable physical presence command.\n"); |
| return tpm_setup_epilogue(result); |
| } |
| |
| result = tlcl_assert_physical_presence(); |
| if (result != TPM_SUCCESS) { |
| printk(BIOS_ERR, "TPM: Can't assert physical presence.\n"); |
| return tpm_setup_epilogue(result); |
| } |
| } |
| |
| #if CONFIG(TPM1) |
| result = tpm1_invoke_state_machine(); |
| #endif |
| |
| return tpm_setup_epilogue(result); |
| } |
| |
| uint32_t tpm_clear_and_reenable(void) |
| { |
| uint32_t result; |
| |
| printk(BIOS_INFO, "TPM: Clear and re-enable\n"); |
| result = tlcl_force_clear(); |
| if (result != TPM_SUCCESS) { |
| printk(BIOS_ERR, "TPM: Can't initiate a force clear.\n"); |
| return result; |
| } |
| |
| #if CONFIG(TPM1) |
| result = tlcl_set_enable(); |
| if (result != TPM_SUCCESS) { |
| printk(BIOS_ERR, "TPM: Can't set enabled state.\n"); |
| return result; |
| } |
| |
| result = tlcl_set_deactivated(0); |
| if (result != TPM_SUCCESS) { |
| printk(BIOS_ERR, "TPM: Can't set deactivated state.\n"); |
| return result; |
| } |
| #endif |
| |
| return TPM_SUCCESS; |
| } |
| |
| uint32_t tpm_extend_pcr(int pcr, enum vb2_hash_algorithm digest_algo, |
| uint8_t *digest, size_t digest_len, const char *name) |
| { |
| uint32_t result; |
| |
| if (!digest) |
| return TPM_E_IOERROR; |
| |
| result = tlcl_extend(pcr, digest, NULL); |
| if (result != TPM_SUCCESS) |
| return result; |
| |
| if (CONFIG(VBOOT_MEASURED_BOOT)) |
| tcpa_log_add_table_entry(name, pcr, digest_algo, |
| digest, digest_len); |
| |
| return TPM_SUCCESS; |
| } |
| |
| #if CONFIG(VBOOT) |
| uint32_t tpm_measure_region(const struct region_device *rdev, uint8_t pcr, |
| const char *rname) |
| { |
| uint8_t digest[TPM_PCR_MAX_LEN], digest_len; |
| uint8_t buf[HASH_DATA_CHUNK_SIZE]; |
| uint32_t result, offset; |
| size_t len; |
| struct vb2_digest_context ctx; |
| enum vb2_hash_algorithm hash_alg; |
| |
| if (!rdev || !rname) |
| return TPM_E_INVALID_ARG; |
| result = tlcl_lib_init(); |
| if (result != TPM_SUCCESS) { |
| printk(BIOS_ERR, "TPM: Can't initialize library.\n"); |
| return result; |
| } |
| if (CONFIG(TPM1)) { |
| hash_alg = VB2_HASH_SHA1; |
| } else { /* CONFIG_TPM2 */ |
| hash_alg = VB2_HASH_SHA256; |
| } |
| |
| digest_len = vb2_digest_size(hash_alg); |
| assert(digest_len <= sizeof(digest)); |
| if (vb2_digest_init(&ctx, hash_alg)) { |
| printk(BIOS_ERR, "TPM: Error initializing hash.\n"); |
| return TPM_E_HASH_ERROR; |
| } |
| /* |
| * Though one can mmap the full needed region on x86 this is not the |
| * case for e.g. ARM. In order to make this code as universal as |
| * possible across different platforms read the data to hash in chunks. |
| */ |
| for (offset = 0; offset < region_device_sz(rdev); offset += len) { |
| len = MIN(sizeof(buf), region_device_sz(rdev) - offset); |
| if (rdev_readat(rdev, buf, offset, len) < 0) { |
| printk(BIOS_ERR, "TPM: Not able to read region %s.\n", |
| rname); |
| return TPM_E_READ_FAILURE; |
| } |
| if (vb2_digest_extend(&ctx, buf, len)) { |
| printk(BIOS_ERR, "TPM: Error extending hash.\n"); |
| return TPM_E_HASH_ERROR; |
| } |
| } |
| if (vb2_digest_finalize(&ctx, digest, digest_len)) { |
| printk(BIOS_ERR, "TPM: Error finalizing hash.\n"); |
| return TPM_E_HASH_ERROR; |
| } |
| result = tpm_extend_pcr(pcr, hash_alg, digest, digest_len, rname); |
| if (result != TPM_SUCCESS) { |
| printk(BIOS_ERR, "TPM: Extending hash into PCR failed.\n"); |
| return result; |
| } |
| printk(BIOS_DEBUG, "TPM: Measured %s into PCR %d\n", rname, pcr); |
| return TPM_SUCCESS; |
| } |
| #endif /* VBOOT */ |