| /* $NoKeywords:$ */ |
| /** |
| * @file |
| * |
| * mttml.c |
| * |
| * Technology Max Latency Training support |
| * |
| * @xrefitem bom "File Content Label" "Release Content" |
| * @e project: AGESA |
| * @e sub-project: (Mem/Tech) |
| * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $ |
| * |
| **/ |
| /***************************************************************************** |
| * |
| * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of Advanced Micro Devices, Inc. nor the names of |
| * its contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * *************************************************************************** |
| * |
| */ |
| |
| /* |
| *---------------------------------------------------------------------------- |
| * MODULES USED |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| |
| |
| #include "AGESA.h" |
| #include "Ids.h" |
| #include "mm.h" |
| #include "mn.h" |
| #include "mt.h" |
| #include "merrhdl.h" |
| #include "GeneralServices.h" |
| #include "Filecode.h" |
| CODE_GROUP (G1_PEICC) |
| RDATA_GROUP (G1_PEICC) |
| |
| #define FILECODE PROC_MEM_TECH_MTTML_FILECODE |
| /*---------------------------------------------------------------------------- |
| * DEFINITIONS AND MACROS |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| /*---------------------------------------------------------------------------- |
| * TYPEDEFS AND STRUCTURES |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| /*---------------------------------------------------------------------------- |
| * PROTOTYPES OF LOCAL FUNCTIONS |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| /*---------------------------------------------------------------------------- |
| * EXPORTED FUNCTIONS |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| /* -----------------------------------------------------------------------------*/ |
| /** |
| * |
| * This function trains Max latency for all dies |
| * |
| * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK |
| * |
| * @return TRUE - No fatal error occurs. |
| * @return FALSE - Fatal error occurs. |
| */ |
| |
| BOOLEAN |
| MemTTrainMaxLatency ( |
| IN OUT MEM_TECH_BLOCK *TechPtr |
| ) |
| { |
| UINT32 TestAddrRJ16; |
| UINT8 Dct; |
| UINT8 ChipSel; |
| UINT8 *PatternBufPtr; |
| UINT8 *TestBufferPtr; |
| UINT8 CurrentNbPstate; |
| UINT16 CalcMaxLatDly; |
| UINT16 MaxLatDly; |
| UINT16 MaxLatLimit; |
| UINT16 Margin; |
| UINT16 CurTest; |
| UINT16 _CL_; |
| UINT8 TimesFail; |
| UINT8 TimesRetrain; |
| UINT16 i; |
| |
| MEM_DATA_STRUCT *MemPtr; |
| DIE_STRUCT *MCTPtr; |
| MEM_NB_BLOCK *NBPtr; |
| |
| NBPtr = TechPtr->NBPtr; |
| MCTPtr = NBPtr->MCTPtr; |
| MemPtr = NBPtr->MemPtr; |
| TechPtr->TrainingType = TRN_MAX_READ_LATENCY; |
| TimesRetrain = DEFAULT_TRAINING_TIMES; |
| IDS_OPTION_HOOK (IDS_MEM_RETRAIN_TIMES, &TimesRetrain, &MemPtr->StdHeader); |
| |
| IDS_HDT_CONSOLE (MEM_STATUS, "\nStart MaxRdLat training\n"); |
| // Set environment settings before training |
| AGESA_TESTPOINT (TpProcMemMaxRdLatencyTraining, &(MemPtr->StdHeader)); |
| |
| MemTBeginTraining (TechPtr); |
| // |
| // Initialize the Training Pattern |
| // |
| if (AGESA_SUCCESS != NBPtr->TrainingPatternInit (NBPtr)) { |
| return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL); |
| } |
| TechPtr->PatternLength = (MCTPtr->Status[Sb128bitmode]) ? 6 : 3; |
| // |
| // Setup hardware training engine (if applicable) |
| // |
| NBPtr->FamilySpecificHook[SetupHwTrainingEngine] (NBPtr, &TechPtr->TrainingType); |
| // |
| // Adjust RdDqsDly used for MaxRdLatency calculation |
| // |
| NBPtr->FamilySpecificHook[AdjustRdDqsDlyForMaxRdLat] (NBPtr, NULL); |
| |
| MaxLatDly = 0; |
| _CL_ = TechPtr->PatternLength; |
| PatternBufPtr = TechPtr->PatternBufPtr; |
| TestBufferPtr = TechPtr->TestBufPtr; |
| // |
| // Begin max latency training |
| // |
| for (Dct = 0; Dct < NBPtr->DctCount; Dct++) { |
| if (MCTPtr->Status[Sb128bitmode] && (Dct != 0)) { |
| break; |
| } |
| |
| IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct); |
| NBPtr->SwitchDCT (NBPtr, Dct); |
| |
| if (NBPtr->DCTPtr->Timings.DctMemSize != 0) { |
| if (TechPtr->FindMaxDlyForMaxRdLat (TechPtr, &ChipSel)) { |
| TechPtr->ChipSel = ChipSel; |
| if (NBPtr->GetSysAddr (NBPtr, ChipSel, &TestAddrRJ16)) { |
| IDS_HDT_CONSOLE (MEM_STATUS, "\t\tCS %d\n", ChipSel); |
| IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tWrite to address: %04x0000\n", TestAddrRJ16); |
| |
| // Write the test patterns |
| AGESA_TESTPOINT (TpProcMemMaxRdLatWritePattern, &(MemPtr->StdHeader)); |
| NBPtr->WritePattern (NBPtr, TestAddrRJ16, PatternBufPtr, _CL_); |
| |
| // Sweep max latency delays |
| NBPtr->getMaxLatParams (NBPtr, TechPtr->MaxDlyForMaxRdLat, &CalcMaxLatDly, &MaxLatLimit, &Margin); |
| AGESA_TESTPOINT (TpProcMemMaxRdLatStartSweep, &(MemPtr->StdHeader)); |
| |
| TimesFail = 0; |
| ERROR_HANDLE_RETRAIN_BEGIN (TimesFail, TimesRetrain) |
| { |
| MaxLatDly = CalcMaxLatDly; |
| for (i = 0; i < (MaxLatLimit - CalcMaxLatDly); i++) { |
| NBPtr->SetBitField (NBPtr, BFMaxLatency, MaxLatDly); |
| IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tDly %3x", MaxLatDly); |
| TechPtr->ResetDCTWrPtr (TechPtr, 6); |
| |
| AGESA_TESTPOINT (TpProcMemMaxRdLatReadPattern, &(MemPtr->StdHeader)); |
| NBPtr->ReadPattern (NBPtr, TestBufferPtr, TestAddrRJ16, _CL_); |
| AGESA_TESTPOINT (TpProcMemMaxRdLatTestPattern, &(MemPtr->StdHeader)); |
| CurTest = NBPtr->CompareTestPattern (NBPtr, TestBufferPtr, PatternBufPtr, _CL_ * 64); |
| NBPtr->FlushPattern (NBPtr, TestAddrRJ16, _CL_); |
| |
| if (NBPtr->IsSupported[ReverseMaxRdLatTrain]) { |
| // Reverse training decrements MaxLatDly whenever the test passes |
| // and uses the last passing MaxLatDly as left edge |
| if (CurTest == 0xFFFF) { |
| IDS_HDT_CONSOLE (MEM_FLOW, " P"); |
| if (MaxLatDly == 0) { |
| break; |
| } else { |
| MaxLatDly--; |
| } |
| } |
| } else { |
| // Traditional training increments MaxLatDly until the test passes |
| // and uses it as left edge |
| if (CurTest == 0xFFFF) { |
| IDS_HDT_CONSOLE (MEM_FLOW, " P"); |
| break; |
| } else { |
| MaxLatDly++; |
| } |
| } |
| IDS_HDT_CONSOLE (MEM_FLOW, "\n"); |
| } // End of delay sweep |
| ERROR_HANDLE_RETRAIN_END ((MaxLatDly >= MaxLatLimit), TimesFail) |
| } |
| |
| AGESA_TESTPOINT (TpProcMemMaxRdLatSetDelay, &(MemPtr->StdHeader)); |
| |
| if (MaxLatDly >= MaxLatLimit) { |
| PutEventLog (AGESA_ERROR, MEM_ERROR_MAX_LAT_NO_WINDOW, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader); |
| SetMemError (AGESA_ERROR, MCTPtr); |
| NBPtr->DCTPtr->Timings.CsTrainFail |= NBPtr->DCTPtr->Timings.CsPresent; |
| MCTPtr->ChannelTrainFail |= (UINT32)1 << Dct; |
| if (!NBPtr->MemPtr->ErrorHandling (MCTPtr, NBPtr->Dct, EXCLUDE_ALL_CHIPSEL, &NBPtr->MemPtr->StdHeader)) { |
| ASSERT (FALSE); |
| return FALSE; |
| } |
| } else { |
| NBPtr->FamilySpecificHook[AddlMaxRdLatTrain] (NBPtr, &TestAddrRJ16); |
| |
| MaxLatDly = MaxLatDly + Margin; |
| if (NBPtr->IsSupported[ReverseMaxRdLatTrain]) { |
| MaxLatDly++; // Add 1 to get back to the last passing value |
| } |
| // Set final delays |
| CurrentNbPstate = (UINT8) MemNGetBitFieldNb (NBPtr, BFCurNbPstate); |
| ASSERT (CurrentNbPstate <= 3); |
| NBPtr->ChannelPtr->DctMaxRdLat [CurrentNbPstate] = MaxLatDly; |
| NBPtr->SetBitField (NBPtr, BFMaxLatency, MaxLatDly); |
| IDS_HDT_CONSOLE (MEM_FLOW, "\t\tFinal MaxRdLat: %03x\n", MaxLatDly); |
| |
| } |
| } |
| } |
| } |
| } |
| |
| // Restore environment settings after training |
| MemTEndTraining (TechPtr); |
| IDS_HDT_CONSOLE (MEM_FLOW, "End MaxRdLat training\n\n"); |
| // |
| // Finalize the Pattern |
| // |
| NBPtr->TrainingPatternFinalize (NBPtr); |
| return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL); |
| } |