| /* |
| * |
| * SPDX-License-Identifier: GPL-2.0-or-later |
| */ |
| |
| #include <soc/iomap.h> |
| |
| /* |
| * Type C Subsystem(TCSS) topology provides Runtime D3 support for USB host controller(xHCI), |
| * USB device controller(xDCI), Thunderbolt DMA devices and Thunderbolt PCIe controllers. |
| * PCIe RP0/RP1 is grouped with DMA0 and PCIe RP2/RP3 is grouped with DMA1. |
| */ |
| #define TCSS_TBT_PCIE0_RP0 0 |
| #define TCSS_TBT_PCIE0_RP1 1 |
| #define TCSS_TBT_PCIE0_RP2 2 |
| #define TCSS_TBT_PCIE0_RP3 3 |
| #define TCSS_XHCI 4 |
| #define TCSS_XDCI 5 |
| #define TCSS_DMA0 6 |
| #define TCSS_DMA1 7 |
| |
| /* |
| * MAILBOX_BIOS_CMD_TCSS_DEVEN_INTERFACE |
| * Command code 0x15 |
| * Description: Gateway command for handling TCSS DEVEN clear/restore. |
| * Field PARAM1[15:8] of the _INTERFACE register is used in this command to select from |
| * a pre-defined set of subcommands. |
| */ |
| #define MAILBOX_BIOS_CMD_TCSS_DEVEN_INTERFACE 0x00000015 |
| #define TCSS_DEVEN_MAILBOX_SUBCMD_GET_STATUS 0 /* Sub-command 0 */ |
| #define TCSS_DEVEN_MAILBOX_SUBCMD_TCSS_CHANGE_REQ 1 /* Sub-command 1 */ |
| |
| #define TCSS_IOM_ACK_TIMEOUT_IN_MS 100 |
| |
| Scope (\_SB) |
| { |
| /* Device base address */ |
| Method (BASE, 1) |
| { |
| Local0 = Arg0 & 0x7 /* Function number */ |
| Local1 = (Arg0 >> 16) & 0x1F /* Device number */ |
| Local2 = (Local0 << 12) + (Local1 << 15) |
| Local3 = \_SB.PCI0.GPCB() + Local2 |
| Return (Local3) |
| } |
| |
| /* |
| * Define PCH ACPIBASE I/O as an ACPI operating region. The base address can be |
| * found in Device 31, Function 2, Offset 40h. |
| */ |
| OperationRegion (PMIO, SystemIO, PCH_PWRM_BASE_ADDRESS, 0x80) |
| Field (PMIO, ByteAcc, NoLock, Preserve) { |
| Offset(0x6C), /* 0x6C, General Purpose Event 0 Status [127:96] */ |
| , 19, |
| CPWS, 1, /* CPU WAKE STATUS */ |
| Offset(0x7C), /* 0x7C, General Purpose Event 0 Enable [127:96] */ |
| , 19, |
| CPWE, 1 /* CPU WAKE EN */ |
| } |
| |
| Name (C2PW, 0) /* Set default value to 0. */ |
| |
| /* |
| * C2PM (CPU to PCH Method) |
| * |
| * This object is Enable/Disable GPE_CPU_WAKE_EN. |
| * Arguments: (4) |
| * Arg0 - An Integer containing the device wake capability |
| * Arg1 - An Integer containing the target system state |
| * Arg2 - An Integer containing the target device state |
| * Arg3 - An Integer containing the request device type |
| * Return Value: |
| * return 0 |
| */ |
| Method (C2PM, 4, NotSerialized) |
| { |
| Local0 = 0x1 << Arg3 |
| /* This method is used to enable/disable wake from Tcss Device (WKEN). */ |
| If (Arg0 && Arg1) |
| { /* If entering Sx and enabling wake, need to enable WAKE capability. */ |
| If (CPWE == 0) { /* If CPU WAKE EN is not set, Set it. */ |
| If (CPWS) { /* If CPU WAKE STATUS is set, Clear it. */ |
| /* Clear CPU WAKE STATUS by writing 1. */ |
| CPWS = 1 |
| } |
| CPWE = 1 /* Set CPU WAKE EN by writing 1. */ |
| } |
| If ((C2PW & Local0) == 0) { |
| /* Set Corresponding Device En BIT in C2PW. */ |
| C2PW |= Local0 |
| } |
| } Else { /* If Staying in S0 or Disabling Wake. */ |
| If (Arg0 || Arg2) { /* Check if Exiting D0 and arming for wake. */ |
| /* If CPU WAKE EN is not set, Set it. */ |
| If (CPWE == 0) { |
| /* If CPU WAKE STATUS is set, Clear it. */ |
| If (CPWS) { |
| /* Clear CPU WAKE STATUS by writing 1. */ |
| CPWS = 1 |
| } |
| CPWE = 1 /* Set CPU WAKE EN by writing 1. */ |
| } |
| If ((C2PW & Local0) == 0) { |
| /* Set Corresponding Device En BIT in C2PW. */ |
| C2PW |= Local0 |
| } |
| } Else { |
| /* |
| * Disable runtime PME, either because staying in D0 or |
| * disabling wake. |
| */ |
| If ((C2PW & Local0) != 0) { |
| /* |
| * Clear Corresponding Device En BIT in C2PW. |
| */ |
| C2PW &= ~Local0 |
| } |
| If ((CPWE != 0) && (C2PW == 0)) { |
| /* |
| * If CPU WAKE EN is set, Clear it. Clear CPU WAKE EN |
| * by writing 0. |
| */ |
| CPWE = 0 |
| } |
| } |
| } |
| Return (0) |
| } |
| } |
| |
| Scope (\_SB.PCI0) |
| { |
| /* |
| * Operation region defined to access the IOM REGBAR. Get the MCHBAR in offset |
| * 0x48 in B0:D0:F0. REGBAR Base address is in offset 0x7110 of MCHBAR. |
| */ |
| OperationRegion (MBAR, SystemMemory, (GMHB() + 0x7100), 0x1000) |
| Field (MBAR, ByteAcc, NoLock, Preserve) |
| { |
| Offset(0x10), |
| RBAR, 64 /* RegBar, offset 0x7110 in MCHBAR */ |
| } |
| Field (MBAR, DWordAcc, NoLock, Preserve) |
| { |
| Offset(0x304), /* PRIMDN_MASK1_0_0_0_MCHBAR_IMPH, offset 0x7404 */ |
| , 31, |
| TCD3, 1 /* [31:31] TCSS IN D3 bit */ |
| } |
| |
| /* |
| * Operation region defined to access the pCode mailbox interface. Get the MCHBAR |
| * in offset 0x48 in B0:D0:F0. MMIO address is in offset 0x5DA0 of MCHBAR. |
| */ |
| OperationRegion (PBAR, SystemMemory, (GMHB() + 0x5DA0), 0x08) |
| Field (PBAR, DWordAcc, NoLock, Preserve) |
| { |
| PMBD, 32, /* pCode MailBox Data, offset 0x5DA0 in MCHBAR */ |
| PMBC, 8, /* pCode MailBox Command, [7:0] of offset 0x5DA4 in MCHBAR */ |
| PSCM, 8, /* pCode MailBox Sub-Command, [15:8] of offset 0x5DA4 in MCHBAR */ |
| , 15, /* Reserved */ |
| PMBR, 1 /* pCode MailBox RunBit, [31:31] of offset 0x5DA4 in MCHBAR */ |
| } |
| |
| /* |
| * Poll pCode MailBox Ready |
| * |
| * Return 0xFF - Timeout |
| * 0x00 - Ready |
| */ |
| Method (PMBY, 0) |
| { |
| Local0 = 0 |
| While (PMBR && (Local0 < 1000)) { |
| Local0++ |
| Stall (1) |
| } |
| If (Local0 == 1000) { |
| Printf("Timeout occurred.") |
| Return (0xFF) |
| } |
| Return (0) |
| } |
| |
| /* |
| * Method to send pCode MailBox command TCSS_DEVEN_MAILBOX_SUBCMD_GET_STATUS |
| * |
| * Result will be updated in DATA[1:0] |
| * DATA[0:0] TCSS_DEVEN_CURRENT_STATE: |
| * 0 - TCSS Deven in normal state. |
| * 1 - TCSS Deven is cleared by BIOS Mailbox request. |
| * DATA[1:1] TCSS_DEVEN_REQUEST_STATUS: |
| * 0 - IDLE. TCSS DEVEN has reached its final requested state. |
| * 1 - In Progress. TCSS DEVEN is currently in progress of switching state |
| * according to given request (bit 0 reflects source state). |
| * |
| * Return 0x00 - TCSS Deven in normal state |
| * 0x01 - TCSS Deven is cleared by BIOS Mailbox request |
| * 0x1x - TCSS Deven is in progress of switching state according to given request |
| * 0xFE - Command timeout |
| * 0xFF - Command corrupt |
| */ |
| Method (DSGS, 0) |
| { |
| If ((PMBY () == 0)) { |
| PMBC = MAILBOX_BIOS_CMD_TCSS_DEVEN_INTERFACE |
| PSCM = TCSS_DEVEN_MAILBOX_SUBCMD_GET_STATUS |
| PMBR = 1 |
| If (PMBY () == 0) { |
| Local0 = PMBD |
| Local1 = PMBC |
| Stall (10) |
| If ((Local0 != PMBD) || (Local1 != PMBC)) { |
| Printf("pCode MailBox is corrupt.") |
| Return (0xFF) |
| } |
| Return (Local0) |
| } Else { |
| Printf("pCode MailBox is not ready.") |
| Return (0xFE) |
| } |
| } Else { |
| Printf("pCode MailBox is not ready.") |
| Return (0xFE) |
| } |
| } |
| |
| /* |
| * Method to send pCode MailBox command TCSS_DEVEN_MAILBOX_SUBCMD_TCSS_CHANGE_REQ |
| * |
| * Arg0 : 0 - Restore to previously saved value of TCSS DEVEN |
| * 1 - Save current TCSS DEVEN value and clear it |
| * |
| * Return 0x00 - MAILBOX_BIOS_CMD_CLEAR_TCSS_DEVEN command completed |
| * 0xFD - Input argument is invalid |
| * 0xFE - Command timeout |
| * 0xFF - Command corrupt |
| */ |
| Method (DSCR, 1) |
| { |
| If (Arg0 > 1) { |
| Printf("pCode MailBox is corrupt.") |
| Return (0xFD) |
| } |
| If ((PMBY () == 0)) { |
| PMBC = MAILBOX_BIOS_CMD_TCSS_DEVEN_INTERFACE |
| PSCM = TCSS_DEVEN_MAILBOX_SUBCMD_TCSS_CHANGE_REQ |
| PMBD = Arg0 |
| PMBR = 1 |
| If ((PMBY () == 0)) { |
| Local0 = PMBD |
| Local1 = PMBC |
| Stall (10) |
| If ((Local0 != PMBD) || (Local1 != PMBC)) { |
| Printf("pCode MailBox is corrupt.") |
| Return (0xFF) |
| } |
| /* Poll TCSS_DEVEN_REQUEST_STATUS, timeout value is 10ms. */ |
| Local0 = 0 |
| While ((DSGS () & 0x10) && (Local0 < 100)) { |
| Stall (100) |
| Local0++ |
| } |
| If (Local0 == 100) { |
| Printf("pCode MailBox is not ready.") |
| Return (0xFE) |
| } Else { |
| Return (0x00) |
| } |
| } Else { |
| Printf("pCode MailBox is not ready.") |
| Return (0xFE) |
| } |
| } Else { |
| Printf("pCode MailBox is not ready.") |
| Return (0xFE) |
| } |
| } |
| |
| /* |
| * IOM REG BAR Base address is in offset 0x7110 in MCHBAR. |
| */ |
| Method (IOMA, 0) |
| { |
| Return (^RBAR & ~0x1) |
| } |
| |
| /* |
| * From RegBar Base, IOM_TypeC_SW_configuration_1 is in offset 0xC10040, where |
| * 0x40 is the register offset. |
| */ |
| OperationRegion (IOMR, SystemMemory, (IOMA() + 0xC10000), 0x100) |
| Field (IOMR, DWordAcc, NoLock, Preserve) |
| { |
| Offset(0x40), |
| , 15, |
| TD3C, 1, /* [15:15] Type C D3 cold bit */ |
| TACK, 1, /* [16:16] IOM Acknowledge bit */ |
| DPOF, 1, /* [17:17] Set 1 to indicate IOM, all the */ |
| /* display is OFF, clear otherwise */ |
| Offset(0x70), /* Pyhsical addr is offset 0x70. */ |
| IMCD, 32, /* R_SA_IOM_BIOS_MAIL_BOX_CMD */ |
| IMDA, 32 /* R_SA_IOM_BIOS_MAIL_BOX_DATA */ |
| } |
| |
| /* |
| * Below is a variable to store devices connect state for TBT PCIe RP before |
| * entering D3 cold. |
| * Value 0 - no device connected before enter D3 cold, no need to send |
| * CONNECT_TOPOLOGY in D3 cold exit. |
| * Value 1 - has device connected before enter D3 cold, need to send |
| * CONNECT_TOPOLOGY in D3 cold exit. |
| */ |
| Name (CTP0, 0) /* Variable of device connecet status for TBT0 group. */ |
| Name (CTP1, 0) /* Variable of device connecet status for TBT1 group. */ |
| |
| /* |
| * TBT Group0 ON method |
| */ |
| Method (TG0N, 0) |
| { |
| If (\_SB.PCI0.TDM0.VDID == 0xFFFFFFFF) { |
| Printf("TDM0 does not exist.") |
| } |
| |
| If (\_SB.PCI0.TDM0.STAT == 0) { |
| /* DMA0 is in D3Cold early. */ |
| \_SB.PCI0.TDM0.D3CX() /* RTD3 Exit */ |
| |
| Printf("Bring TBT RPs out of D3Code.") |
| If (\_SB.PCI0.TRP0.VDID != 0xFFFFFFFF) { |
| /* RP0 D3 cold exit. */ |
| \_SB.PCI0.TRP0.D3CX() |
| } |
| If (\_SB.PCI0.TRP1.VDID != 0xFFFFFFFF) { |
| /* RP1 D3 cold exit. */ |
| \_SB.PCI0.TRP1.D3CX() |
| } |
| |
| /* |
| * Need to send Connect-Topology command when TBT host |
| * controller back to D0 from D3. |
| */ |
| If (\_SB.PCI0.TDM0.ALCT == 1) { |
| If (CTP0 == 1) { |
| /* |
| * Send Connect-Topology command if there is |
| * device present on PCIe RP. |
| */ |
| \_SB.PCI0.TDM0.CNTP() |
| |
| /* Indicate to wait Connect-Topology command. */ |
| \_SB.PCI0.TDM0.WACT = 1 |
| |
| /* Clear the connect states. */ |
| CTP0 = 0 |
| } |
| /* Disallow to send Connect-Topology command. */ |
| \_SB.PCI0.TDM0.ALCT = 0 |
| } |
| } Else { |
| Printf("Drop TG0N due to it is already exit D3 cold.") |
| } |
| /* TBT RTD3 exit 10ms delay. */ |
| Sleep (10) |
| } |
| |
| /* |
| * TBT Group0 OFF method |
| */ |
| Method (TG0F, 0) |
| { |
| If (\_SB.PCI0.TDM0.VDID == 0xFFFFFFFF) { |
| Printf("TDM0 does not exist.") |
| } |
| |
| If (\_SB.PCI0.TDM0.STAT == 1) { |
| /* DMA0 is not in D3Cold now. */ |
| \_SB.PCI0.TDM0.D3CE() /* Enable DMA RTD3 */ |
| |
| Printf("Push TBT RPs to D3Cold together") |
| If (\_SB.PCI0.TRP0.VDID != 0xFFFFFFFF) { |
| If (\_SB.PCI0.TRP0.PDSX == 1) { |
| CTP0 = 1 |
| } |
| /* Put RP0 to D3 cold. */ |
| \_SB.PCI0.TRP0.D3CE() |
| } |
| If (\_SB.PCI0.TRP1.VDID != 0xFFFFFFFF) { |
| If (\_SB.PCI0.TRP1.PDSX == 1) { |
| CTP0 = 1 |
| } |
| /* Put RP1 to D3 cold. */ |
| \_SB.PCI0.TRP1.D3CE() |
| } |
| } |
| } |
| |
| /* |
| * TBT Group1 ON method |
| */ |
| Method (TG1N, 0) |
| { |
| If (\_SB.PCI0.TDM1.VDID == 0xFFFFFFFF) { |
| Printf("TDM1 does not exist.") |
| } |
| |
| If (\_SB.PCI0.TDM1.STAT == 0) { |
| /* DMA1 is in D3Cold early. */ |
| \_SB.PCI0.TDM1.D3CX() /* RTD3 Exit */ |
| |
| Printf("Bring TBT RPs out of D3Code.") |
| If (\_SB.PCI0.TRP2.VDID != 0xFFFFFFFF) { |
| /* RP2 D3 cold exit. */ |
| \_SB.PCI0.TRP2.D3CX() |
| } |
| If (\_SB.PCI0.TRP3.VDID != 0xFFFFFFFF) { |
| /* RP3 D3 cold exit. */ |
| \_SB.PCI0.TRP3.D3CX() |
| } |
| |
| /* |
| * Need to send Connect-Topology command when TBT host |
| * controller back to D0 from D3. |
| */ |
| If (\_SB.PCI0.TDM1.ALCT == 1) { |
| If (CTP1 == 1) { |
| /* |
| * Send Connect-Topology command if there is |
| * device present on PCIe RP. |
| */ |
| \_SB.PCI0.TDM1.CNTP() |
| |
| /* Indicate to wait Connect-Topology command. */ |
| \_SB.PCI0.TDM1.WACT = 1 |
| |
| /* Clear the connect states. */ |
| CTP1 = 0 |
| } |
| /* Disallow to send Connect-Topology cmd. */ |
| \_SB.PCI0.TDM1.ALCT = 0 |
| } |
| } Else { |
| Printf("Drop TG1N due to it is already exit D3 cold.") |
| } |
| /* TBT RTD3 exit 10ms delay. */ |
| Sleep (10) |
| } |
| |
| /* |
| * TBT Group1 OFF method |
| */ |
| Method (TG1F, 0) |
| { |
| If (\_SB.PCI0.TDM1.VDID == 0xFFFFFFFF) { |
| Printf("TDM1 does not exist.") |
| } |
| |
| If (\_SB.PCI0.TDM1.STAT == 1) { |
| /* DMA1 is not in D3Cold now */ |
| \_SB.PCI0.TDM1.D3CE() /* Enable DMA RTD3. */ |
| |
| Printf("Push TBT RPs to D3Cold together") |
| If (\_SB.PCI0.TRP2.VDID != 0xFFFFFFFF) { |
| If (\_SB.PCI0.TRP2.PDSX == 1) { |
| CTP1 = 1 |
| } |
| /* Put RP2 to D3 cold. */ |
| \_SB.PCI0.TRP2.D3CE() |
| } |
| If (\_SB.PCI0.TRP3.VDID != 0xFFFFFFFF) { |
| If (\_SB.PCI0.TRP3.PDSX == 1) { |
| CTP1 = 1 |
| } |
| /* Put RP3 to D3 cold */ |
| \_SB.PCI0.TRP3.D3CE() |
| } |
| } |
| } |
| |
| PowerResource (TBT0, 5, 1) |
| { |
| Method (_STA, 0) |
| { |
| Return (\_SB.PCI0.TDM0.STAT) |
| } |
| |
| Method (_ON, 0) |
| { |
| TG0N() |
| } |
| |
| Method (_OFF, 0) |
| { |
| If (\_SB.PCI0.TDM0.SD3C == 0) { |
| TG0F() |
| } |
| } |
| } |
| |
| PowerResource (TBT1, 5, 1) |
| { |
| Method (_STA, 0) |
| { |
| Return (\_SB.PCI0.TDM1.STAT) |
| } |
| |
| Method (_ON, 0) |
| { |
| TG1N() |
| } |
| |
| Method (_OFF, 0) |
| { |
| If (\_SB.PCI0.TDM1.SD3C == 0) { |
| TG1F() |
| } |
| } |
| } |
| |
| Method (TCON, 0) |
| { |
| /* Reset IOM D3 cold bit if it is in D3 cold now. */ |
| If (TD3C == 1) /* It was in D3 cold before. */ |
| { |
| /* Reset IOM D3 cold bit. */ |
| TD3C = 0 /* Request IOM for D3 cold exit sequence. */ |
| Local0 = 0 /* Time check counter variable */ |
| /* Wait for ack, the maximum wait time for the ack is 100 msec. */ |
| While ((TACK != 0) && (Local0 < TCSS_IOM_ACK_TIMEOUT_IN_MS)) { |
| /* |
| * Wait in this loop until TACK becomes 0 with timeout |
| * TCSS_IOM_ACK_TIMEOUT_IN_MS by default. |
| */ |
| Sleep (1) /* Delay of 1ms. */ |
| Local0++ |
| } |
| |
| If (Local0 == TCSS_IOM_ACK_TIMEOUT_IN_MS) { |
| Printf("Error: Error: Timeout occurred.") |
| } |
| Else |
| { |
| /* |
| * Program IOP MCTP Drop (TCSS_IN_D3) after D3 cold exit and |
| * acknowledgement by IOM. |
| */ |
| TCD3 = 0 |
| /* |
| * If the TCSS Deven is cleared by BIOS Mailbox request, then |
| * restore to previously saved value of TCSS DEVNE. |
| */ |
| Local0 = 0 |
| While (\_SB.PCI0.TXHC.VDID == 0xFFFFFFFF) { |
| If (DSGS () == 1) { |
| DSCR (0) |
| } |
| Local0++ |
| If (Local0 == 5) { |
| Printf("pCode mailbox command failed.") |
| Break |
| } |
| } |
| } |
| } |
| Else { |
| Printf("Drop TCON due to it is already exit D3 cold.") |
| } |
| } |
| |
| Method (TCOF, 0) |
| { |
| If ((\_SB.PCI0.TXHC.SD3C != 0) || (\_SB.PCI0.TDM0.SD3C != 0) |
| || (\_SB.PCI0.TDM1.SD3C != 0)) |
| { |
| Printf("Skip D3C entry.") |
| Return |
| } |
| |
| /* |
| * If the TCSS Deven in normal state, then Save current TCSS DEVEN value and |
| * clear it. |
| */ |
| Local0 = 0 |
| While (\_SB.PCI0.TXHC.VDID != 0xFFFFFFFF) { |
| If (DSGS () == 0) { |
| DSCR (1) |
| } |
| Local0++ |
| If (Local0 == 5) { |
| Printf("pCode mailbox command failed.") |
| Break |
| } |
| } |
| |
| /* |
| * Program IOM MCTP Drop (TCSS_IN_D3) in D3Cold entry before entering D3 cold. |
| */ |
| TCD3 = 1 |
| |
| /* Request IOM for D3 cold entry sequence. */ |
| TD3C = 1 |
| } |
| |
| PowerResource (D3C, 5, 0) |
| { |
| /* |
| * Variable to save power state |
| * 1 - TC Cold request cleared. |
| * 0 - TC Cold request sent. |
| */ |
| Name (STAT, 0x1) |
| |
| Method (_STA, 0) |
| { |
| Return (STAT) |
| } |
| |
| Method (_ON, 0) |
| { |
| \_SB.PCI0.TCON() |
| STAT = 1 |
| } |
| |
| Method (_OFF, 0) |
| { |
| \_SB.PCI0.TCOF() |
| STAT = 0 |
| } |
| } |
| |
| /* |
| * TCSS xHCI device |
| */ |
| Device (TXHC) |
| { |
| Name (_ADR, 0x000D0000) |
| Name (_DDN, "North XHCI controller") |
| Name (_STR, Unicode ("North XHCI controller")) |
| Name (DCPM, TCSS_XHCI) |
| |
| Method (_STA, 0x0, NotSerialized) |
| { |
| Return (0x0F) |
| } |
| #include "tcss_xhci.asl" |
| } |
| |
| /* |
| * TCSS DMA0 device |
| */ |
| Device (TDM0) |
| { |
| Name (_ADR, 0x000D0002) |
| Name (_DDN, "TBT DMA0 controller") |
| Name (_STR, Unicode ("TBT DMA0 controller")) |
| Name (DUID, 0) /* TBT DMA number */ |
| Name (DCPM, TCSS_DMA0) |
| |
| Method (_STA, 0x0, NotSerialized) |
| { |
| Return (0x0F) |
| } |
| #include "tcss_dma.asl" |
| } |
| |
| /* |
| * TCSS DMA1 device |
| */ |
| Device (TDM1) |
| { |
| Name (_ADR, 0x000D0003) |
| Name (_DDN, "TBT DMA1 controller") |
| Name (_STR, Unicode ("TBT DMA1 controller")) |
| Name (DUID, 1) /* TBT DMA number */ |
| Name (DCPM, TCSS_DMA1) |
| |
| Method (_STA, 0x0, NotSerialized) |
| { |
| Return (0x0F) |
| } |
| #include "tcss_dma.asl" |
| } |
| |
| /* |
| * TCSS PCIE Root Port #00 |
| */ |
| Device (TRP0) |
| { |
| Name (_ADR, 0x00070000) |
| Name (TUID, 0) /* TBT PCIE RP Number 0 for RP00 */ |
| Name (LTEN, 0) /* Latency Tolerance Reporting Mechanism, 0:Disable, 1:Enable */ |
| Name (LMSL, 0) /* PCIE LTR max snoop Latency */ |
| Name (LNSL, 0) /* PCIE LTR max no snoop Latency */ |
| Name (DCPM, TCSS_TBT_PCIE0_RP0) |
| |
| Method (_STA, 0x0, NotSerialized) |
| { |
| Return (0x0F) |
| } |
| Method (_INI) |
| { |
| LTEN = 0 |
| LMSL = 0x88C8 |
| LNSL = 0x88C8 |
| } |
| #include "tcss_pcierp.asl" |
| } |
| |
| /* |
| * TCSS PCIE Root Port #01 |
| */ |
| Device (TRP1) |
| { |
| Name (_ADR, 0x00070001) |
| Name (TUID, 1) /* TBT PCIE RP Number 1 for RP01 */ |
| Name (LTEN, 0) /* Latency Tolerance Reporting Mechanism, 0:Disable, 1:Enable */ |
| Name (LMSL, 0) /* PCIE LTR max snoop Latency */ |
| Name (LNSL, 0) /* PCIE LTR max no snoop Latency */ |
| Name (DCPM, TCSS_TBT_PCIE0_RP1) |
| |
| Method (_STA, 0x0, NotSerialized) |
| { |
| Return (0x0F) |
| } |
| Method (_INI) |
| { |
| LTEN = 0 |
| LMSL = 0x88C8 |
| LNSL = 0x88C8 |
| } |
| #include "tcss_pcierp.asl" |
| } |
| |
| /* |
| * TCSS PCIE Root Port #02 |
| */ |
| Device (TRP2) |
| { |
| Name (_ADR, 0x00070002) |
| Name (TUID, 2) /* TBT PCIE RP Number 2 for RP02 */ |
| Name (LTEN, 0) /* Latency Tolerance Reporting Mechanism, 0:Disable, 1:Enable */ |
| Name (LMSL, 0) /* PCIE LTR max snoop Latency */ |
| Name (LNSL, 0) /* PCIE LTR max no snoop Latency */ |
| Name (DCPM, TCSS_TBT_PCIE0_RP2) |
| |
| Method (_STA, 0x0, NotSerialized) |
| { |
| Return (0x0F) |
| } |
| Method (_INI) |
| { |
| LTEN = 0 |
| LMSL = 0x88C8 |
| LNSL = 0x88C8 |
| } |
| #include "tcss_pcierp.asl" |
| } |
| |
| /* |
| * TCSS PCIE Root Port #03 |
| */ |
| Device (TRP3) |
| { |
| Name (_ADR, 0x00070003) |
| Name (TUID, 3) /* TBT PCIE RP Number 3 for RP03 */ |
| Name (LTEN, 0) /* Latency Tolerance Reporting Mechanism, 0:Disable, 1:Enable */ |
| Name (LMSL, 0) /* PCIE LTR max snoop Latency */ |
| Name (LNSL, 0) /* PCIE LTR max no snoop Latency */ |
| Name (DCPM, TCSS_TBT_PCIE0_RP3) |
| |
| Method (_STA, 0x0, NotSerialized) |
| { |
| Return (0x0F) |
| } |
| Method (_INI) |
| { |
| LTEN = 0 |
| LMSL = 0x88C8 |
| LNSL = 0x88C8 |
| } |
| #include "tcss_pcierp.asl" |
| } |
| } |