| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <arch/romstage.h> |
| #include <arch/symbols.h> |
| #include <console/console.h> |
| #include <cbmem.h> |
| #include "../chip.h" |
| #include <fsp/util.h> |
| #include <soc/iomap.h> |
| #include <soc/pci_devs.h> |
| #include <soc/pm.h> |
| #include <soc/romstage.h> |
| #include <soc/reg_access.h> |
| #include <soc/storage_test.h> |
| |
| void mainboard_romstage_entry(void) |
| { |
| bool s3wake; |
| |
| post_code(0x20); |
| console_init(); |
| |
| if (CONFIG(STORAGE_TEST)) { |
| uint32_t bar; |
| pci_devfn_t dev; |
| uint32_t previous_bar; |
| uint16_t previous_command; |
| |
| /* Enable the SD/MMC controller and run the test. Restore |
| * the BAR and command registers upon completion. |
| */ |
| dev = PCI_DEV(0, SD_MMC_DEV, SD_MMC_FUNC); |
| bar = storage_test_init(dev, &previous_bar, &previous_command); |
| storage_test(bar, 1); |
| storage_test_complete(dev, previous_bar, previous_command); |
| } |
| |
| /* Initialize DRAM */ |
| s3wake = fill_power_state() == ACPI_S3; |
| fsp_memory_init(s3wake); |
| |
| /* Disable the ROM shadow 0x000e0000 - 0x000fffff */ |
| disable_rom_shadow(); |
| |
| /* Initialize the PCIe bridges */ |
| pcie_init(); |
| } |
| |
| static struct chipset_power_state power_state; |
| |
| struct chipset_power_state *get_power_state(void) |
| { |
| return &power_state; |
| } |
| |
| int fill_power_state(void) |
| { |
| power_state.prev_sleep_state = 0; |
| printk(BIOS_SPEW, "prev_sleep_state %d\n", |
| power_state.prev_sleep_state); |
| return power_state.prev_sleep_state; |
| } |
| |
| void platform_fsp_memory_init_params_cb(FSPM_UPD *fspm_upd, uint32_t version) |
| { |
| FSPM_ARCH_UPD *aupd; |
| const struct soc_intel_quark_config *config; |
| void *rmu_data; |
| size_t rmu_data_len; |
| FSP_M_CONFIG *upd; |
| |
| /* Clear SMI and wake events */ |
| clear_smi_and_wake_events(); |
| |
| /* Locate the RMU data file in flash */ |
| rmu_data = locate_rmu_file(&rmu_data_len); |
| if (!rmu_data) |
| die_with_post_code(POST_INVALID_CBFS, |
| "Microcode file (rmu.bin) not found."); |
| |
| /* Locate the configuration data from devicetree.cb */ |
| config = config_of_soc(); |
| |
| /* Update the architectural UPD values. */ |
| aupd = &fspm_upd->FspmArchUpd; |
| aupd->BootLoaderTolumSize = cbmem_overhead_size(); |
| aupd->StackBase = (void *)(CONFIG_FSP_ESRAM_LOC - aupd->StackSize); |
| aupd->BootMode = FSP_BOOT_WITH_FULL_CONFIGURATION; |
| |
| /* Display the ESRAM layout */ |
| if (CONFIG(DISPLAY_ESRAM_LAYOUT)) { |
| printk(BIOS_SPEW, "\nESRAM Layout:\n\n"); |
| printk(BIOS_SPEW, |
| "+-------------------+ 0x80080000 - ESRAM end\n"); |
| printk(BIOS_SPEW, "| FSP binary |\n"); |
| printk(BIOS_SPEW, |
| "+-------------------+ 0x%08x (CONFIG_FSP_ESRAM_LOC)\n", |
| CONFIG_FSP_ESRAM_LOC); |
| printk(BIOS_SPEW, "| FSP stack |\n"); |
| printk(BIOS_SPEW, "+-------------------+ %p\n", |
| aupd->StackBase); |
| printk(BIOS_SPEW, "| |\n"); |
| printk(BIOS_SPEW, "+-------------------+ %p\n", |
| _car_unallocated_start); |
| printk(BIOS_SPEW, "| coreboot data |\n"); |
| printk(BIOS_SPEW, "+-------------------+ %p\n", |
| _ecar_stack); |
| printk(BIOS_SPEW, "| coreboot stack |\n"); |
| printk(BIOS_SPEW, |
| "+-------------------+ 0x80000000 - ESRAM start\n\n"); |
| } |
| |
| /* Update the UPD data for MemoryInit */ |
| upd = &fspm_upd->FspmConfig; |
| upd->AddrMode = config->AddrMode; |
| upd->ChanMask = config->ChanMask; |
| upd->ChanWidth = config->ChanWidth; |
| upd->DramDensity = config->DramDensity; |
| upd->DramRonVal = config->DramRonVal; |
| upd->DramRttNomVal = config->DramRttNomVal; |
| upd->DramRttWrVal = config->DramRttWrVal; |
| upd->DramSpeed = config->DramSpeed; |
| upd->DramType = config->DramType; |
| upd->DramWidth = config->DramWidth; |
| upd->EccScrubBlkSize = config->EccScrubBlkSize; |
| upd->EccScrubInterval = config->EccScrubInterval; |
| upd->Flags = config->Flags; |
| upd->FspReservedMemoryLength = config->FspReservedMemoryLength; |
| upd->RankMask = config->RankMask; |
| upd->RmuBaseAddress = (uintptr_t)rmu_data; |
| upd->RmuLength = rmu_data_len; |
| upd->SerialPortWriteChar = !!console_log_level(BIOS_SPEW) |
| ? (uintptr_t)fsp_write_line : 0; |
| upd->SmmTsegSize = CONFIG(HAVE_SMI_HANDLER) ? |
| config->SmmTsegSize : 0; |
| upd->SocRdOdtVal = config->SocRdOdtVal; |
| upd->SocWrRonVal = config->SocWrRonVal; |
| upd->SocWrSlewRate = config->SocWrSlewRate; |
| upd->SrInt = config->SrInt; |
| upd->SrTemp = config->SrTemp; |
| upd->tCL = config->tCL; |
| upd->tFAW = config->tFAW; |
| upd->tRAS = config->tRAS; |
| upd->tRRD = config->tRRD; |
| upd->tWTR = config->tWTR; |
| } |