| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| /* |
| * Include this file into a mainboard DSDT inside the PCI device |
| * "Northbridge Miscellaneous Control (Northbridge function 3)" and it |
| * will expose the temperature sensor of the processor as a thermal |
| * zone. |
| * |
| * Families 10 through 14 and some family 15 CPUs are supported. |
| * |
| * If, for example, the NB Misc. Control device is on 0:18.3, include |
| * the following: |
| * |
| * Scope (\_SB.PCI0) { |
| * Device (K10M) { |
| * Name (_ADR, 0x00180003) |
| * #include <soc/amd/common/acpi/thermal_zone.asl> |
| * } |
| * } |
| * |
| * Do not include this if the board is affected by erratum 319 as the |
| * thermal sensor of Socket F/AM2+ processors may be unreliable. |
| * (Erratum 319 affects AM2+ boards, AM3 and later should be fine) |
| */ |
| |
| #ifndef K10TEMP_HOT_OFFSET |
| # define K10TEMP_HOT_OFFSET 50 |
| #endif |
| |
| #define K10TEMP_KELVIN_OFFSET 2732 |
| #define K10TEMP_TLIMIT_OFFSET 520 |
| |
| OperationRegion (TCFG, PCI_Config, 0x64, 0x4) |
| Field (TCFG, ByteAcc, NoLock, Preserve) { |
| HTCE, 1, /* Hardware thermal control enable */ |
| , 15, |
| TLMT, 7, /* (LimitTmp - 52) / 0.5 */ |
| , 9, |
| } |
| |
| OperationRegion (TCTL, PCI_Config, 0xa4, 0x4) |
| Field (TCTL, ByteAcc, NoLock, Preserve) { |
| , 21, |
| TNOW, 11, /* CurTmp / 0.125 */ |
| } |
| |
| ThermalZone (TZ00) { |
| Name (_STR, Unicode ("AMD CPU Core Thermal Sensor")) |
| |
| Method (_STA) { |
| If (LEqual (HTCE, One)) { |
| Return (0x0F) |
| } |
| Return (Zero) |
| } |
| |
| Method (_TMP) { /* Current temp in tenths degree Kelvin. */ |
| Multiply (TNOW, 10, Local0) |
| ShiftRight (Local0, 3, Local0) |
| Return (Add (Local0, K10TEMP_KELVIN_OFFSET)) |
| } |
| |
| /* |
| * TLMT indicates threshold where HTC become active. That is the processor will limit |
| * P-State and power consumption in order to cool down. |
| */ |
| Method (_PSV) { /* Passive temp in tenths degree Kelvin. */ |
| Multiply (TLMT, 10, Local0) |
| ShiftRight (Local0, 1, Local0) |
| Add (Local0, K10TEMP_TLIMIT_OFFSET, Local0) |
| Return (Add (Local0, K10TEMP_KELVIN_OFFSET)) |
| } |
| |
| Method (_HOT) { /* Hot temp in tenths degree Kelvin. */ |
| Return (Add (_PSV, K10TEMP_HOT_OFFSET)) |
| } |
| |
| Method (_CRT) { /* Critical temp in tenths degree Kelvin. */ |
| Return (Add (_HOT, K10TEMP_HOT_OFFSET)) |
| } |
| } |