| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <soc/pei_data.h> |
| #include <soc/pei_wrapper.h> |
| |
| void mainboard_fill_pei_data(struct pei_data *pei_data) |
| { |
| pei_data->ec_present = 1; |
| pei_data->dq_pins_interleaved = 1; |
| |
| /* One DIMM slot */ |
| pei_data->dimm_channel0_disabled = 2; |
| pei_data->dimm_channel1_disabled = 2; |
| |
| pei_data->spd_addresses[0] = 0xa0; |
| pei_data->spd_addresses[2] = 0xa4; |
| |
| /* P1: Right Side Port (USB2) */ |
| pei_data_usb2_port(pei_data, 0, 0x0080, 1, USB_OC_PIN_SKIP, |
| USB_PORT_BACK_PANEL); |
| /* P2: Right Side Port (USB2) */ |
| pei_data_usb2_port(pei_data, 1, 0x0080, 1, USB_OC_PIN_SKIP, |
| USB_PORT_BACK_PANEL); |
| /* P3: Left Side Port (USB2 only) */ |
| pei_data_usb2_port(pei_data, 2, 0x0080, 1, USB_OC_PIN_SKIP, |
| USB_PORT_BACK_PANEL); |
| /* P4: Left Side Port (USB2 only) */ |
| pei_data_usb2_port(pei_data, 3, 0x0080, 1, USB_OC_PIN_SKIP, |
| USB_PORT_BACK_PANEL); |
| /* P5: Empty */ |
| pei_data_usb2_port(pei_data, 4, 0x0080, 0, USB_OC_PIN_SKIP, |
| USB_PORT_BACK_PANEL); |
| /* P6: Bluetooth */ |
| pei_data_usb2_port(pei_data, 5, 0x0080, 1, USB_OC_PIN_SKIP, |
| USB_PORT_SKIP); |
| /* P7: Camera */ |
| pei_data_usb2_port(pei_data, 6, 0x0080, 1, USB_OC_PIN_SKIP, |
| USB_PORT_SKIP); |
| /* P8: SD Card */ |
| pei_data_usb2_port(pei_data, 7, 0x0080, 1, USB_OC_PIN_SKIP, |
| USB_PORT_BACK_PANEL); |
| |
| /* P1: Right Side Port (USB3) */ |
| pei_data_usb3_port(pei_data, 0, 1, USB_OC_PIN_SKIP, 0); |
| /* P2: Right Side Port (USB3) */ |
| pei_data_usb3_port(pei_data, 1, 1, USB_OC_PIN_SKIP, 0); |
| /* P3: Empty */ |
| pei_data_usb3_port(pei_data, 2, 0, USB_OC_PIN_SKIP, 0); |
| /* P4: Empty */ |
| pei_data_usb3_port(pei_data, 3, 0, USB_OC_PIN_SKIP, 0); |
| } |