| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <stdint.h> |
| #include <soc/gpio.h> |
| #include <soc/pei_data.h> |
| #include <soc/pei_wrapper.h> |
| |
| void mainboard_fill_pei_data(struct pei_data *pei_data) |
| { |
| /* One installed DIMM per channel */ |
| pei_data->dimm_channel0_disabled = 2; |
| pei_data->dimm_channel1_disabled = 2; |
| |
| pei_data->spd_addresses[0] = 0xa2; |
| pei_data->spd_addresses[2] = 0xa2; |
| |
| pei_data_usb2_port(pei_data, 0, 0x40, 1, USB_OC_PIN_SKIP, |
| USB_PORT_FRONT_PANEL); |
| pei_data_usb2_port(pei_data, 1, 0x40, 1, USB_OC_PIN_SKIP, |
| USB_PORT_FRONT_PANEL); |
| pei_data_usb2_port(pei_data, 2, 0x40, 1, USB_OC_PIN_SKIP, |
| USB_PORT_FRONT_PANEL); |
| pei_data_usb2_port(pei_data, 3, 0x40, 1, USB_OC_PIN_SKIP, |
| USB_PORT_FRONT_PANEL); |
| pei_data_usb2_port(pei_data, 4, 0x40, 1, USB_OC_PIN_SKIP, |
| USB_PORT_FRONT_PANEL); |
| pei_data_usb2_port(pei_data, 5, 0x40, 1, USB_OC_PIN_SKIP, |
| USB_PORT_FRONT_PANEL); |
| pei_data_usb2_port(pei_data, 6, 0x40, 1, USB_OC_PIN_SKIP, |
| USB_PORT_FRONT_PANEL); |
| pei_data_usb2_port(pei_data, 7, 0x40, 1, USB_OC_PIN_SKIP, |
| USB_PORT_FRONT_PANEL); |
| |
| pei_data_usb3_port(pei_data, 0, 1, USB_OC_PIN_SKIP, 0); |
| pei_data_usb3_port(pei_data, 1, 1, USB_OC_PIN_SKIP, 0); |
| pei_data_usb3_port(pei_data, 2, 1, USB_OC_PIN_SKIP, 0); |
| pei_data_usb3_port(pei_data, 3, 1, USB_OC_PIN_SKIP, 0); |
| } |