| /* |
| * |
| * Copyright (C) 2010 Patrick Georgi |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. The name of the author may not be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| */ |
| |
| //#define USB_DEBUG |
| |
| #include <libpayload.h> |
| #include "ohci_private.h" |
| #include "ohci.h" |
| |
| typedef struct { |
| int numports; |
| int *port; |
| } rh_inst_t; |
| |
| #define RH_INST(dev) ((rh_inst_t*)(dev)->data) |
| |
| static void |
| ohci_rh_enable_port (usbdev_t *dev, int port) |
| { |
| /* Reset RH port should hold 50ms with pulses of at least 10ms and |
| * gaps of at most 3ms (usb20 spec 7.1.7.5). |
| * After reset, the port will be enabled automatically (ohci spec |
| * 7.4.4). |
| */ |
| int total_delay = 100; /* 100 * 500us == 50ms */ |
| while (total_delay > 0) { |
| if (!(OHCI_INST(dev->controller)->opreg->HcRhPortStatus[port] |
| & CurrentConnectStatus)) |
| return; |
| |
| /* start reset */ |
| OHCI_INST (dev->controller)->opreg->HcRhPortStatus[port] = |
| SetPortReset; |
| int timeout = 200; /* timeout after 200 * 500us == 100ms */ |
| while ((OHCI_INST (dev->controller)->opreg->HcRhPortStatus[port] |
| & PortResetStatus) |
| && timeout--) { |
| udelay(500); total_delay--; |
| } |
| if (OHCI_INST (dev->controller)->opreg->HcRhPortStatus[port] |
| & PortResetStatus) { |
| usb_debug("Warning: root-hub port reset timed out.\n"); |
| break; |
| } |
| if ((200-timeout) < 20) |
| usb_debug("Warning: port reset too short: %dms; " |
| "should be at least 10ms.\n", |
| (200-timeout)/2); |
| /* clear reset status change */ |
| OHCI_INST (dev->controller)->opreg->HcRhPortStatus[port] = |
| PortResetStatusChange; |
| usb_debug ("rh port reset finished after %dms.\n", (200-timeout)/2); |
| } |
| } |
| |
| /* disable root hub */ |
| static void |
| ohci_rh_disable_port (usbdev_t *dev, int port) |
| { |
| if (RH_INST (dev)->port[port] != -1) { |
| usb_detach_device(dev->controller, RH_INST (dev)->port[port]); |
| RH_INST (dev)->port[port] = -1; |
| } |
| |
| OHCI_INST (dev->controller)->opreg->HcRhPortStatus[port] = ClearPortEnable; // disable port |
| int timeout = 50; /* timeout after 50 * 100us == 5ms */ |
| while ((OHCI_INST (dev->controller)->opreg->HcRhPortStatus[port] |
| & PortEnableStatus) |
| && timeout--) { |
| udelay(100); |
| } |
| } |
| |
| static void |
| ohci_rh_scanport (usbdev_t *dev, int port) |
| { |
| if (port >= RH_INST(dev)->numports) { |
| usb_debug("Invalid port %d\n", port); |
| return; |
| } |
| |
| /* device registered, and device change logged, so something must have happened */ |
| if (RH_INST (dev)->port[port] != -1) { |
| usb_detach_device(dev->controller, RH_INST (dev)->port[port]); |
| RH_INST (dev)->port[port] = -1; |
| } |
| |
| /* no device attached |
| previously registered devices are detached, nothing left to do */ |
| if (!(OHCI_INST(dev->controller)->opreg->HcRhPortStatus[port] & CurrentConnectStatus)) |
| return; |
| |
| OHCI_INST (dev->controller)->opreg->HcRhPortStatus[port] = ConnectStatusChange; // clear port state change |
| ohci_rh_enable_port (dev, port); |
| |
| mdelay(100); // wait for signal to stabilize |
| |
| if (!(OHCI_INST(dev->controller)->opreg->HcRhPortStatus[port] & PortEnableStatus)) { |
| usb_debug ("port enable failed\n"); |
| return; |
| } |
| |
| usb_speed speed = (OHCI_INST(dev->controller)->opreg->HcRhPortStatus[port] & LowSpeedDeviceAttached) != 0; |
| RH_INST (dev)->port[port] = usb_attach_device(dev->controller, dev->address, port, speed); |
| } |
| |
| static int |
| ohci_rh_report_port_changes (usbdev_t *dev) |
| { |
| ohci_t *const ohcic = OHCI_INST (dev->controller); |
| |
| int i; |
| |
| for (i = 0; i < RH_INST(dev)->numports; i++) { |
| // maybe detach+attach happened between two scans? |
| if (ohcic->opreg->HcRhPortStatus[i] & ConnectStatusChange) { |
| ohcic->opreg->HcRhPortStatus[i] = ConnectStatusChange; |
| usb_debug("attachment change on port %d\n", i); |
| return i; |
| } |
| } |
| |
| // no change |
| return -1; |
| } |
| |
| static void |
| ohci_rh_destroy (usbdev_t *dev) |
| { |
| int i; |
| for (i = 0; i < RH_INST (dev)->numports; i++) |
| ohci_rh_disable_port (dev, i); |
| free (RH_INST (dev)); |
| } |
| |
| static void |
| ohci_rh_poll (usbdev_t *dev) |
| { |
| ohci_t *const ohcic = OHCI_INST (dev->controller); |
| |
| int port; |
| |
| /* Check if anything changed. */ |
| if (!(ohcic->opreg->HcInterruptStatus & RootHubStatusChange)) |
| return; |
| ohcic->opreg->HcInterruptStatus = RootHubStatusChange; |
| usb_debug("root hub status change\n"); |
| |
| /* Scan ports with changed connection status. */ |
| while ((port = ohci_rh_report_port_changes (dev)) != -1) |
| ohci_rh_scanport (dev, port); |
| } |
| |
| void |
| ohci_rh_init (usbdev_t *dev) |
| { |
| int i; |
| |
| dev->destroy = ohci_rh_destroy; |
| dev->poll = ohci_rh_poll; |
| |
| dev->data = xmalloc (sizeof (rh_inst_t)); |
| RH_INST (dev)->numports = OHCI_INST (dev->controller)->opreg->HcRhDescriptorA & NumberDownstreamPortsMask; |
| RH_INST (dev)->port = xmalloc(sizeof(int) * RH_INST (dev)->numports); |
| usb_debug("%d ports registered\n", RH_INST (dev)->numports); |
| |
| for (i = 0; i < RH_INST (dev)->numports; i++) { |
| ohci_rh_enable_port (dev, i); |
| RH_INST (dev)->port[i] = -1; |
| } |
| |
| /* we can set them here because a root hub _really_ shouldn't |
| appear elsewhere */ |
| dev->address = 0; |
| dev->hub = -1; |
| dev->port = -1; |
| |
| usb_debug("rh init done\n"); |
| } |