blob: b8163e710be5005856a9be96433b0e963a1226f0 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0-only */
#define __SIMPLE_DEVICE__
#include <console/console.h>
#include <arch/io.h>
#include <device/pnp_ops.h>
#include <device/device.h>
#include <device/pnp.h>
#include <delay.h>
#include "dock.h"
#include <superio/nsc/pc87382/pc87382.h>
#include <southbridge/intel/i82801ix/i82801ix.h>
#include <ec/lenovo/h8/h8.h>
#include <ec/acpi/ec.h>
struct pin_config {
u8 port;
u8 mode;
};
static int poll_clk_stable(pnp_devfn_t dev, int timeout)
{
/* Enable 14.318MHz CLK on CLKIN */
pnp_write_config(dev, 0x29, 0xa0);
while (!(pnp_read_config(dev, 0x29) & 0x10) && timeout--)
udelay(1000);
if (!timeout)
return 1;
return 0;
}
static int gpio_init(pnp_devfn_t gpio, u16 gpio_base,
const struct pin_config pincfg[], int num_cfgs)
{
int i;
/* Enable GPIO LDN. */
pnp_set_logical_device(gpio);
pnp_set_iobase(gpio, PNP_IDX_IO0, gpio_base);
pnp_set_enable(gpio, 1);
for (i = 0; i < num_cfgs; i++) {
pnp_write_config(gpio, 0xf0, pincfg[i].port);
pnp_write_config(gpio, 0xf1, pincfg[i].mode);
pnp_write_config(gpio, 0xf2, 0x0);
}
return 0;
}
static const pnp_devfn_t l_dlpc = PNP_DEV(0x164e, PC87382_DOCK);
static const pnp_devfn_t l_gpio = PNP_DEV(0x164e, PC87382_GPIO);
static int pc87382_init(pnp_devfn_t dlpc, u16 dlpc_base)
{
/* Maximum 3300 LCLKs at 14.318MHz */
int timeout = 230;
/* Enable LPC bridge LDN. */
pnp_set_logical_device(dlpc);
pnp_set_iobase(dlpc, PNP_IDX_IO0, dlpc_base);
pnp_set_enable(dlpc, 1);
/* Reset docking state */
outb(0x00, dlpc_base);
outb(0x07, dlpc_base);
while (!(inb(dlpc_base) & 8) && timeout--)
udelay(1);
if (!timeout)
return 1;
return 0;
}
static void pc87382_close(pnp_devfn_t dlpc)
{
pnp_set_logical_device(dlpc);
/* Disconnect LPC bus */
u16 dlpc_base = pnp_read_iobase(dlpc, PNP_IDX_IO0);
if (dlpc_base) {
outb(0x00, dlpc_base);
pnp_set_enable(dlpc, 0);
}
}
static const struct pin_config local_gpio[] = {
{0x00, 3}, {0x01, 3}, {0x02, 0}, {0x03, 3},
{0x04, 4}, {0x20, 4}, {0x21, 4}, {0x23, 4},
};
/* Enable internal clock and configure GPIO LDN */
int pc87382_early(void)
{
/* Wake-up time is 33 msec (maximum). */
if (poll_clk_stable(l_gpio, 33) != 0)
return 1;
/* Set up GPIOs */
if (gpio_init(l_gpio, DLPC_GPIO_BASE,
local_gpio, ARRAY_SIZE(local_gpio)) != 0) {
return 1;
}
return 0;
}
static int pc87382_connect(void)
{
u8 reg;
reg = inb(DLPC_GPDO0);
reg |= D_PLTRST | D_LPCPD;
/* Deassert D_PLTRST# and D_LPCPD# */
outb(reg, DLPC_GPDO0);
if (pc87382_init(l_dlpc, DLPC_CONTROL) != 0)
return 1;
/* Assert D_PLTRST# */
reg &= ~D_PLTRST;
outb(reg, DLPC_GPDO0);
udelay(1000);
/* Deassert D_PLTRST# */
reg |= D_PLTRST;
outb(reg, DLPC_GPDO0);
mdelay(10);
return 0;
}
static void pc87382_disconnect(void)
{
pc87382_close(l_dlpc);
/* Assert D_PLTRST# and D_LPCPD# */
u8 reg = inb(DLPC_GPDO0);
reg &= ~(D_PLTRST | D_LPCPD);
outb(reg, DLPC_GPDO0);
}
/* Returns 3bit dock id */
static u8 dock_identify(void)
{
u8 id;
/* Make sure GPIO LDN is configured first ! */
id = (inb(DLPC_GPDI0) >> 4) & 1;
id |= (inb(DLPC_GPDI2) & 3) << 1;
return id;
}
/* Docking station side. */
#include <superio/nsc/pc87384/pc87384.h>
static const pnp_devfn_t r_gpio = PNP_DEV(SUPERIO_DEV, PC87384_GPIO);
static const pnp_devfn_t r_serial = PNP_DEV(SUPERIO_DEV, PC87384_SP1);
static const struct pin_config remote_gpio[] = {
{0x00, PC87384_GPIO_PIN_DEBOUNCE | PC87384_GPIO_PIN_PULLUP},
{0x01, PC87384_GPIO_PIN_TYPE_PUSH_PULL | PC87384_GPIO_PIN_OE},
{0x02, PC87384_GPIO_PIN_TYPE_PUSH_PULL | PC87384_GPIO_PIN_OE},
{0x03, PC87384_GPIO_PIN_DEBOUNCE | PC87384_GPIO_PIN_PULLUP},
{0x04, PC87384_GPIO_PIN_DEBOUNCE | PC87384_GPIO_PIN_PULLUP},
{0x05, PC87384_GPIO_PIN_DEBOUNCE | PC87384_GPIO_PIN_PULLUP},
{0x06, PC87384_GPIO_PIN_DEBOUNCE | PC87384_GPIO_PIN_PULLUP},
{0x07, PC87384_GPIO_PIN_DEBOUNCE | PC87384_GPIO_PIN_PULLUP},
};
static int pc87384_init(void)
{
if (poll_clk_stable(r_gpio, 1000) != 0)
return 1;
/* set GPIO pins to Serial/Parallel Port
* functions
*/
pnp_write_config(r_gpio, 0x22, 0xa9);
/* enable serial port */
if (CONFIG_TTYS0_BASE > 0) {
pnp_set_logical_device(r_serial);
pnp_set_iobase(r_serial, PNP_IDX_IO0, CONFIG_TTYS0_BASE);
pnp_set_enable(r_serial, 1);
}
if (gpio_init(r_gpio, DOCK_GPIO_BASE,
remote_gpio, ARRAY_SIZE(remote_gpio)) != 0)
return 1;
/* no GPIO events enabled for PORT0 */
outb(0x00, DOCK_GPIO_BASE + 0x02);
/* clear GPIO events on PORT0 */
outb(0xff, DOCK_GPIO_BASE + 0x03);
outb(0xff, DOCK_GPIO_BASE + 0x04);
/* no GPIO events enabled for PORT1 */
outb(0x00, DOCK_GPIO_BASE + 0x06);
/* clear GPIO events on PORT1*/
outb(0xff, DOCK_GPIO_BASE + 0x07);
outb(0x1f, DOCK_GPIO_BASE + 0x08);
outb(0xfd, DOCK_GPIO_BASE + 0x00);
return 0;
}
/* Mainboard */
void dock_connect(void)
{
const u8 id = dock_identify();
/* Dock type 2505 doesn't have serial, LPT port or LEDs */
if (id == DOCK_TYPE_NONE || id == DOCK_TYPE_2505)
return;
if (pc87382_connect() != 0 || pc87384_init() != 0) {
pc87382_disconnect();
return;
}
ec_write(H8_LED_CONTROL,
H8_LED_CONTROL_OFF | H8_LED_CONTROL_DOCK_LED1);
ec_write(H8_LED_CONTROL,
H8_LED_CONTROL_ON | H8_LED_CONTROL_DOCK_LED2);
}
void dock_disconnect(void)
{
pc87382_disconnect();
ec_write(H8_LED_CONTROL,
H8_LED_CONTROL_OFF | H8_LED_CONTROL_DOCK_LED1);
ec_write(H8_LED_CONTROL,
H8_LED_CONTROL_OFF | H8_LED_CONTROL_DOCK_LED2);
}
void dock_info(void)
{
const u8 id = dock_identify();
if (id != DOCK_TYPE_NONE)
printk(BIOS_DEBUG, "DOCK: is present: id=%d\n", id);
else
printk(BIOS_DEBUG, "DOCK: not connected\n");
}