| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <assert.h> |
| #include <console/console.h> |
| #include <cpu/x86/msr.h> |
| #include <fsp/util.h> |
| #include <intelblocks/cpulib.h> |
| #include <soc/iomap.h> |
| #include <soc/msr.h> |
| #include <soc/pci_devs.h> |
| #include <soc/romstage.h> |
| #include <soc/soc_chip.h> |
| |
| static void cpu_flex_override(FSP_M_CONFIG *m_cfg) |
| { |
| msr_t flex_ratio; |
| m_cfg->CpuRatioOverride = 1; |
| /* |
| * Set cpuratio to that value set in bootblock, This will ensure FSPM |
| * knows the intended flex ratio. |
| */ |
| flex_ratio = rdmsr(MSR_FLEX_RATIO); |
| m_cfg->CpuRatio = (flex_ratio.lo >> 8) & 0xff; |
| } |
| |
| static void soc_peg_init_params(FSP_M_CONFIG *m_cfg, |
| FSP_M_TEST_CONFIG *m_t_cfg, |
| const struct soc_intel_skylake_config *config) |
| { |
| const struct device *dev; |
| /* |
| * To enable or disable the corresponding PEG root port you need to |
| * add to the devicetree.cb: |
| * |
| * device pci 01.0 on end # enable PEG0 root port |
| * device pci 01.1 off end # do not configure PEG1 |
| * |
| * If PEG port is not defined in the device tree, it will be disabled |
| * in FSP |
| */ |
| dev = pcidev_path_on_root(SA_DEVFN_PEG0); /* PEG 0:1:0 */ |
| m_cfg->Peg0Enable = dev && dev->enabled; |
| if (m_cfg->Peg0Enable) { |
| m_cfg->Peg0Enable = 2; |
| m_cfg->Peg0MaxLinkWidth = config->Peg0MaxLinkWidth; |
| /* Use maximum possible link speed */ |
| m_cfg->Peg0MaxLinkSpeed = 0; |
| /* Power down unused lanes based on the max possible width */ |
| m_cfg->Peg0PowerDownUnusedLanes = 1; |
| /* Set [Auto] for options to enable equalization methods */ |
| m_t_cfg->Peg0Gen3EqPh2Enable = 2; |
| m_t_cfg->Peg0Gen3EqPh3Method = 0; |
| } |
| |
| dev = pcidev_path_on_root(SA_DEVFN_PEG1); /* PEG 0:1:1 */ |
| m_cfg->Peg1Enable = dev && dev->enabled; |
| if (m_cfg->Peg1Enable) { |
| m_cfg->Peg1Enable = 2; |
| m_cfg->Peg1MaxLinkWidth = config->Peg1MaxLinkWidth; |
| m_cfg->Peg1MaxLinkSpeed = 0; |
| m_cfg->Peg1PowerDownUnusedLanes = 1; |
| m_t_cfg->Peg1Gen3EqPh2Enable = 2; |
| m_t_cfg->Peg1Gen3EqPh3Method = 0; |
| } |
| |
| dev = pcidev_path_on_root(SA_DEVFN_PEG2); /* PEG 0:1:2 */ |
| m_cfg->Peg2Enable = dev && dev->enabled; |
| if (m_cfg->Peg2Enable) { |
| m_cfg->Peg2Enable = 2; |
| m_cfg->Peg2MaxLinkWidth = config->Peg2MaxLinkWidth; |
| m_cfg->Peg2MaxLinkSpeed = 0; |
| m_cfg->Peg2PowerDownUnusedLanes = 1; |
| m_t_cfg->Peg2Gen3EqPh2Enable = 2; |
| m_t_cfg->Peg2Gen3EqPh3Method = 0; |
| } |
| } |
| |
| static void soc_memory_init_params(FSP_M_CONFIG *m_cfg, |
| const struct soc_intel_skylake_config *config) |
| { |
| int i; |
| uint32_t mask = 0; |
| |
| m_cfg->MmioSize = 0x800; /* 2GB in MB */ |
| m_cfg->TsegSize = CONFIG_SMM_TSEG_SIZE; |
| m_cfg->IedSize = CONFIG_IED_REGION_SIZE; |
| m_cfg->ProbelessTrace = 0; |
| m_cfg->SaGv = config->SaGv; |
| m_cfg->UserBd = BOARD_TYPE_ULT_ULX; |
| m_cfg->RMT = config->Rmt; |
| m_cfg->CmdTriStateDis = config->CmdTriStateDis; |
| m_cfg->DdrFreqLimit = 0; |
| m_cfg->VmxEnable = CONFIG(ENABLE_VMX); |
| m_cfg->PrmrrSize = get_valid_prmrr_size(); |
| for (i = 0; i < ARRAY_SIZE(config->PcieRpEnable); i++) { |
| if (config->PcieRpEnable[i]) |
| mask |= (1<<i); |
| } |
| m_cfg->PcieRpEnableMask = mask; |
| |
| cpu_flex_override(m_cfg); |
| |
| /* HPET BDF already handled in coreboot code, so tell FSP to ignore UPDs */ |
| m_cfg->PchHpetBdfValid = 0; |
| |
| m_cfg->HyperThreading = CONFIG(FSP_HYPERTHREADING); |
| } |
| |
| static void soc_primary_gfx_config_params(FSP_M_CONFIG *m_cfg, |
| const struct soc_intel_skylake_config *config) |
| { |
| const struct device *dev; |
| |
| dev = pcidev_path_on_root(SA_DEVFN_IGD); |
| m_cfg->InternalGfx = dev && dev->enabled; |
| |
| /* |
| * If iGPU is enabled, set IGD stolen size to 64MB. The FBC |
| * hardware for skylake does not have access to the bios |
| * reserved range so it always assumes 8MB is used and so the |
| * kernel will avoid the last 8MB of the stolen window. With |
| * the default stolen size of 32MB(-8MB) there is not enough |
| * space for FBC to work with a high resolution panel. |
| * |
| * If disabled, don't reserve memory for it. |
| */ |
| m_cfg->IgdDvmt50PreAlloc = m_cfg->InternalGfx ? 2 : 0; |
| |
| m_cfg->PrimaryDisplay = config->PrimaryDisplay; |
| } |
| |
| void platform_fsp_memory_init_params_cb(FSPM_UPD *mupd, uint32_t version) |
| { |
| const struct soc_intel_skylake_config *config; |
| const struct device *dev; |
| FSP_M_CONFIG *m_cfg = &mupd->FspmConfig; |
| FSP_M_TEST_CONFIG *m_t_cfg = &mupd->FspmTestConfig; |
| |
| config = config_of_soc(); |
| |
| soc_memory_init_params(m_cfg, config); |
| soc_peg_init_params(m_cfg, m_t_cfg, config); |
| |
| /* Skip creating Management Engine MBP HOB */ |
| m_t_cfg->SkipMbpHob = 0x01; |
| |
| /* Enable DMI Virtual Channel for ME */ |
| m_t_cfg->DmiVcm = 0x01; |
| |
| /* Enable Sending DID to ME */ |
| m_t_cfg->SendDidMsg = 0x01; |
| m_t_cfg->DidInitStat = 0x01; |
| |
| /* DCI and TraceHub configs */ |
| m_t_cfg->PchDciEn = config->PchDciEn; |
| |
| dev = pcidev_path_on_root(PCH_DEVFN_TRACEHUB); |
| m_cfg->EnableTraceHub = dev && dev->enabled; |
| m_cfg->TraceHubMemReg0Size = config->TraceHubMemReg0Size; |
| m_cfg->TraceHubMemReg1Size = config->TraceHubMemReg1Size; |
| |
| /* Enable SMBus controller */ |
| dev = pcidev_path_on_root(PCH_DEVFN_SMBUS); |
| m_cfg->SmbusEnable = dev && dev->enabled; |
| |
| /* Set primary graphic device */ |
| soc_primary_gfx_config_params(m_cfg, config); |
| m_t_cfg->SkipExtGfxScan = config->SkipExtGfxScan; |
| |
| mainboard_memory_init_params(mupd); |
| } |
| |
| void soc_update_memory_params_for_mma(FSP_M_CONFIG *memory_cfg, |
| struct mma_config_param *mma_cfg) |
| { |
| /* Boot media is memory mapped for Skylake and Kabylake (SPI). */ |
| assert(CONFIG(BOOT_DEVICE_MEMORY_MAPPED)); |
| |
| memory_cfg->MmaTestContentPtr = |
| (uintptr_t) rdev_mmap_full(&mma_cfg->test_content); |
| memory_cfg->MmaTestContentSize = |
| region_device_sz(&mma_cfg->test_content); |
| memory_cfg->MmaTestConfigPtr = |
| (uintptr_t) rdev_mmap_full(&mma_cfg->test_param); |
| memory_cfg->MmaTestConfigSize = |
| region_device_sz(&mma_cfg->test_param); |
| memory_cfg->MrcFastBoot = 0x00; |
| memory_cfg->SaGv = 0x02; |
| } |