| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <console/console.h> |
| #include <device/pci.h> |
| #include <arch/io.h> |
| #include <device/pci_ops.h> |
| #include <amdblocks/amd_pci_util.h> |
| #include <pc80/i8259.h> |
| #include <soc/amd_pci_int_defs.h> |
| |
| const struct pirq_struct *pirq_data_ptr; |
| u32 pirq_data_size; |
| const u8 *intr_data_ptr; |
| const u8 *picr_data_ptr; |
| |
| /* |
| * Read the FCH PCI_INTR registers 0xC00/0xC01 at a |
| * given index and a given PIC (0) or IOAPIC (1) mode |
| */ |
| u8 read_pci_int_idx(u8 index, int mode) |
| { |
| outb((mode << 7) | index, PCI_INTR_INDEX); |
| return inb(PCI_INTR_DATA); |
| } |
| |
| /* |
| * Write a value to the FCH PCI_INTR registers 0xC00/0xC01 |
| * at a given index and PIC (0) or IOAPIC (1) mode |
| */ |
| void write_pci_int_idx(u8 index, int mode, u8 data) |
| { |
| outb((mode << 7) | index, PCI_INTR_INDEX); |
| outb(data, PCI_INTR_DATA); |
| } |
| |
| /* |
| * Write the FCH PCI_INTR registers 0xC00/0xC01 with values |
| * given in global variables intr_data and picr_data. |
| * These variables are defined in mainboard.c |
| */ |
| void write_pci_int_table(void) |
| { |
| uint8_t byte; |
| size_t i, limit; |
| const struct irq_idx_name *idx_name; |
| |
| idx_name = sb_get_apic_reg_association(&limit); |
| if (picr_data_ptr == NULL || intr_data_ptr == NULL || |
| idx_name == NULL) { |
| printk(BIOS_ERR, "Warning: Can't write PCI_INTR 0xC00/0xC01" |
| " registers because\n" |
| "'mainboard_picr_data' or 'mainboard_intr_data'" |
| " or 'irq_association'\ntables are NULL\n"); |
| return; |
| } |
| |
| /* PIC IRQ routine */ |
| printk(BIOS_DEBUG, "PCI_INTR tables: Writing registers C00/C01 for" |
| " PCI IRQ routing:\n" |
| "PCI_INTR_INDEX\tname\t\t PIC mode" |
| "\tAPIC mode\n"); |
| /* |
| * Iterate table idx_name, indexes outside the table are ignored |
| * (assumed not connected within the chip). For each iteration, |
| * get the register index "byte" and the name of the associated |
| * IRQ source for printing. |
| */ |
| for (i = 0 ; i < limit; i++) { |
| byte = idx_name[i].index; |
| write_pci_int_idx(byte, 0, (u8)picr_data_ptr[byte]); |
| printk(BIOS_DEBUG, "0x%02X\t\t%-20s 0x%02X\t", |
| byte, idx_name[i].name, |
| read_pci_int_idx(byte, 0)); |
| write_pci_int_idx(byte, 1, (u8)intr_data_ptr[byte]); |
| printk(BIOS_DEBUG, "0x%02X\n", read_pci_int_idx(byte, 1)); |
| } |
| } |
| |
| /* |
| * Function to write the PCI config space Interrupt |
| * registers based on the values given in PCI_INTR |
| * table at I/O port 0xC00/0xC01 |
| */ |
| void write_pci_cfg_irqs(void) |
| { |
| struct device *dev = NULL; /* Our current device to route IRQs */ |
| struct device *target_dev = NULL; /* the bridge a device may be |
| * connected to */ |
| u16 int_pin = 0; |
| u16 target_pin = 0; |
| u16 int_line = 0; |
| u16 pci_intr_idx = 0; /* Index into PCI_INTR table, 0xC00/0xC01 */ |
| u16 devfn = 0; |
| u32 i = 0; |
| size_t limit; |
| const struct irq_idx_name *idx_name; |
| |
| idx_name = sb_get_apic_reg_association(&limit); |
| if (pirq_data_ptr == NULL) { |
| printk(BIOS_WARNING, "Can't write PCI IRQ assignments" |
| " because 'mainboard_pirq_data' structure does" |
| " not exist\n"); |
| return; |
| } |
| |
| /* Populate the PCI cfg space header with the IRQ assignment */ |
| printk(BIOS_DEBUG, "PCI_CFG IRQ: Write PCI config space IRQ" |
| " assignments\n"); |
| |
| for (dev = all_devices ; dev ; dev = dev->next) { |
| /* |
| * Step 1: Get INT_PIN and device structure to look for in the |
| * PCI_INTR table pirq_data |
| */ |
| target_dev = NULL; |
| target_pin = get_pci_irq_pins(dev, &target_dev); |
| if (target_dev == NULL) |
| continue; |
| |
| if (target_pin < 1) |
| continue; |
| |
| /* Get the original INT_PIN for record keeping */ |
| int_pin = pci_read_config8(dev, PCI_INTERRUPT_PIN); |
| if (int_pin < 1 || int_pin > 4) |
| continue; /* Device has invalid INT_PIN - skip */ |
| |
| devfn = target_dev->path.pci.devfn; |
| |
| /* |
| * Step 2: Use the INT_PIN and DevFn number to find the PCI_INTR |
| * register (0xC00) index for this device |
| */ |
| pci_intr_idx = 0xbad; /* Will check to make sure it changed */ |
| for (i = 0 ; i < pirq_data_size ; i++) { |
| if (pirq_data_ptr[i].devfn != devfn) |
| continue; |
| |
| /* PIN_A is idx0 in pirq_data array but 1 in PCI reg */ |
| pci_intr_idx = pirq_data_ptr[i].PIN[target_pin - 1]; |
| printk(BIOS_SPEW, "\tFound this device in pirq_data" |
| " table entry %d\n", i); |
| break; |
| } |
| |
| /* |
| * Step 3: Make sure we got a valid index and use it to get |
| * the IRQ number from the PCI_INTR register table |
| */ |
| if (pci_intr_idx == 0xbad) { |
| /* Not on a bridge or in pirq_data table, skip it */ |
| printk(BIOS_SPEW, "PCI Devfn (0x%x) not found in" |
| " pirq_data table\n", devfn); |
| continue; |
| } else if (pci_intr_idx == 0x1f) { |
| /* Index found is not defined */ |
| printk(BIOS_SPEW, "Got index 0x1F (Not Connected)," |
| " perhaps this device was" |
| " defined wrong?\n"); |
| continue; |
| } |
| /* |
| * Find the name associated with register [pci_intr_idx] |
| * and print information. |
| */ |
| for (i = 0; i < limit; i++) { |
| if (idx_name[i].index == pci_intr_idx) |
| break; |
| } |
| if (i == limit) { |
| printk(BIOS_SPEW, "Got register index 0x%02x" |
| " undefined in table irq_idx_name,\n" |
| " perhaps this device was" |
| " defined wrong?\n", pci_intr_idx); |
| continue; |
| } |
| |
| /* Find the value to program into the INT_LINE register from |
| * the PCI_INTR registers |
| */ |
| int_line = read_pci_int_idx(pci_intr_idx, 0); |
| if (int_line == PIRQ_NC) { /* The IRQ found is disabled */ |
| printk(BIOS_SPEW, "Got IRQ 0x1F (disabled), perhaps" |
| " this device was defined wrong?\n"); |
| continue; |
| } |
| |
| /* |
| * Step 4: Program the INT_LINE register in this device's |
| * PCI config space with the IRQ number we found in step 3 |
| * and make it Level Triggered |
| */ |
| pci_write_config8(dev, PCI_INTERRUPT_LINE, int_line); |
| |
| /* Set IRQ to level triggered since used by a PCI device */ |
| i8259_configure_irq_trigger(int_line, IRQ_LEVEL_TRIGGERED); |
| |
| /* |
| * Step 5: Print out debug info and move on to next device |
| */ |
| printk(BIOS_SPEW, "\tOrig INT_PIN\t: %d (%s)\n", |
| int_pin, pin_to_str(int_pin)); |
| printk(BIOS_SPEW, "\tPCI_INTR idx\t: 0x%02x (%s)\n" |
| "\tINT_LINE\t: 0x%X (IRQ %d)\n", |
| pci_intr_idx, idx_name[i].name, |
| int_line, int_line); |
| } /* for (dev = all_devices) */ |
| printk(BIOS_DEBUG, "PCI_CFG IRQ: Finished writing PCI config space" |
| " IRQ assignments\n"); |
| } |