| config SOC_AMD_GENOA |
| bool |
| |
| if SOC_AMD_GENOA |
| |
| config SOC_SPECIFIC_OPTIONS |
| def_bool y |
| select ARCH_X86 |
| select HAVE_EXP_X86_64_SUPPORT |
| select RESET_VECTOR_IN_RAM |
| select SOC_AMD_COMMON |
| select SOC_AMD_COMMON_BLOCK_ACPIMMIO |
| select SOC_AMD_COMMON_BLOCK_AOAC |
| select SOC_AMD_COMMON_BLOCK_BANKED_GPIOS |
| select SOC_AMD_COMMON_BLOCK_CPUFREQ_FAM17H_19H |
| select SOC_AMD_COMMON_BLOCK_HAS_ESPI |
| select SOC_AMD_COMMON_BLOCK_LPC |
| select SOC_AMD_COMMON_BLOCK_NONCAR |
| select SOC_AMD_COMMON_BLOCK_PCI_MMCONF |
| select SOC_AMD_COMMON_BLOCK_SMI |
| select SOC_AMD_COMMON_BLOCK_TSC |
| select SOC_AMD_COMMON_BLOCK_UART |
| select SOC_AMD_COMMON_BLOCK_USE_ESPI |
| select X86_CUSTOM_BOOTMEDIA |
| |
| config USE_EXP_X86_64_SUPPORT |
| default y |
| |
| config CHIPSET_DEVICETREE |
| string |
| default "soc/amd/genoa/chipset.cb" |
| |
| config EARLY_RESERVED_DRAM_BASE |
| hex |
| default 0x7000000 |
| help |
| This variable defines the base address of the DRAM which is reserved |
| for usage by coreboot in early stages (i.e. before ramstage is up). |
| This memory gets reserved in BIOS tables to ensure that the OS does |
| not use it, thus preventing corruption of OS memory in case of S3 |
| resume. |
| |
| config EARLYRAM_BSP_STACK_SIZE |
| hex |
| default 0x1000 |
| |
| config PSP_APOB_DRAM_ADDRESS |
| hex |
| default 0x7001000 |
| help |
| Location in DRAM where the PSP will copy the AGESA PSP Output |
| Block. |
| |
| config PSP_APOB_DRAM_SIZE |
| hex |
| default 0x20000 |
| |
| config PRERAM_CBMEM_CONSOLE_SIZE |
| hex |
| default 0x1600 |
| help |
| Increase this value if preram cbmem console is getting truncated |
| |
| config C_ENV_BOOTBLOCK_SIZE |
| hex |
| default 0x10000 |
| help |
| Sets the size of the bootblock stage that should be loaded in DRAM. |
| This variable controls the DRAM allocation size in linker script |
| for bootblock stage. |
| |
| config ROMSTAGE_ADDR |
| hex |
| default 0x7040000 |
| help |
| Sets the address in DRAM where romstage should be loaded. |
| |
| config ROMSTAGE_SIZE |
| hex |
| default 0x80000 |
| help |
| Sets the size of DRAM allocation for romstage in linker script. |
| |
| config ECAM_MMCONF_BASE_ADDRESS |
| hex |
| default 0xE0000000 |
| |
| config ECAM_MMCONF_BUS_NUMBER |
| int |
| default 256 |
| |
| menu "PSP Configuration Options" |
| |
| config AMDFW_CONFIG_FILE |
| string |
| default "src/soc/amd/genoa/fw.cfg" |
| |
| config PSP_DISABLE_POSTCODES |
| bool "Disable PSP post codes" |
| help |
| Disables the output of port80 post codes from PSP. |
| |
| config PSP_INIT_ESPI |
| bool "Initialize eSPI in PSP Stage 2 Boot Loader" |
| help |
| Select to initialize the eSPI controller in the PSP Stage 2 Boot |
| Loader. |
| |
| config PSP_UNLOCK_SECURE_DEBUG |
| bool |
| default y |
| |
| config HAVE_PSP_WHITELIST_FILE |
| bool "Include a debug whitelist file in PSP build" |
| default n |
| help |
| Support secured unlock prior to reset using a whitelisted |
| serial number. This feature requires a signed whitelist image |
| and bootloader from AMD. |
| |
| If unsure, answer 'n' |
| |
| config PSP_WHITELIST_FILE |
| string "Debug whitelist file path" |
| depends on HAVE_PSP_WHITELIST_FILE |
| |
| config PERFORM_SPL_FUSING |
| bool "Send SPL fuse command to PSP" |
| default n |
| help |
| Send the Security Patch Level (SPL) fusing command to the PSP in |
| order to update the minimum SPL version to be written to the SoC's |
| fuse bits. This will prevent using any embedded firmware components |
| with lower SPL version. |
| |
| If unsure, answer 'n' |
| |
| config SPL_TABLE_FILE |
| string "SPL table file override" |
| help |
| Provide a mainboard-specific Security Patch Level (SPL) table file |
| override. The SPL file is required to support PSP FW anti-rollback |
| and needs to be created by AMD. The default SPL file specified in the |
| SoC's fw.cfg is in the corresponding folder of the amd_blobs submodule |
| and applies to all boards that use the SoC without verstage on PSP. |
| In the verstage on PSP case, a different SPL file is specific as an |
| override via this Kconfig option. |
| |
| config PSP_SOFTFUSE_BITS |
| string "PSP Soft Fuse bits to enable" |
| default "" |
| help |
| Space separated list of Soft Fuse bits to enable. |
| Bit 0: Enable secure debug (Set by PSP_UNLOCK_SECURE_DEBUG) |
| Bit 7: Disable PSP postcodes on Renoir and newer chips only |
| (Set by PSP_DISABLE_PORT80) |
| Bit 15: PSP debug output destination: |
| 0=SoC MMIO UART, 1=IO port 0x3F8 |
| |
| See #57299 (NDA) for additional bit definitions. |
| endmenu |
| |
| |
| endif # SOC_AMD_GENOA |