| ## SPDX-License-Identifier: GPL-2.0-only |
| |
| if SOC_INTEL_SAPPHIRERAPIDS_SP |
| |
| config SOC_SPECIFIC_OPTIONS |
| def_bool y |
| select MICROCODE_BLOB_NOT_HOOKED_UP |
| select SAVE_MRC_AFTER_FSPS |
| select SOC_INTEL_MEM_MAPPED_PM_CONFIGURATION |
| select DISABLE_ACPI_HIBERNATE |
| |
| config CHIPSET_DEVICETREE |
| string |
| default "soc/intel/xeon_sp/spr/chipset.cb" |
| |
| config FSP_HEADER_PATH |
| string "Location of FSP headers" |
| depends on MAINBOARD_USES_FSP2_0 |
| default "src/vendorcode/intel/fsp/fsp2_0/sapphirerapids_sp" |
| |
| config MAX_CPUS |
| int |
| default 255 |
| |
| config MAX_SOCKET_UPD |
| int |
| default 2 |
| help |
| This is used for configuring common SPR UPD tables which their sizes |
| depend on the socket number. Since it's the maximal socket number for |
| the common UPD tables, mainboard should not overwrite it. |
| |
| config SIPI_FINAL_TIMEOUT |
| int |
| default 400000 |
| |
| config PCR_BASE_ADDRESS |
| hex |
| default 0xfd000000 |
| help |
| This option allows you to select MMIO Base Address of sideband bus. |
| |
| config DCACHE_RAM_BASE |
| hex |
| default 0xfe800000 |
| |
| config DCACHE_RAM_SIZE |
| hex |
| default 0x1fff00 |
| help |
| The size of the cache-as-ram region required during bootblock |
| and/or romstage. FSP-T reserves the upper 0x100 for |
| FspReservedBuffer. |
| |
| config DCACHE_BSP_STACK_SIZE |
| hex |
| default 0x40000 |
| help |
| The amount of anticipated stack usage in CAR by bootblock and |
| other stages. It needs to include FSP-M stack requirement and |
| CB romstage stack requirement. The integration documentation |
| says this needs to be 256KiB. |
| |
| config FSP_M_RC_HEAP_SIZE |
| hex |
| default 0x150000 |
| help |
| On xeon_sp/spr FSP-M has two separate heap managers, one regular |
| whose size and base are controllable via the StackBase and |
| StackSize UPDs and a 'rc' heap manager that is statically |
| allocated at 0xfe800000 (the CAR base) and consumes about 0x150000 |
| bytes of memory. |
| |
| config CPU_MICROCODE_CBFS_LOC |
| hex |
| default 0xffe0fdc0 |
| |
| config CPU_MICROCODE_CBFS_LEN |
| hex |
| default 0x8c00 |
| |
| config HEAP_SIZE |
| hex |
| default 0x80000 |
| |
| config STACK_SIZE |
| hex |
| default 0x4000 |
| |
| config FSP_TEMP_RAM_SIZE |
| hex |
| depends on FSP_USES_CB_STACK |
| default 0x60000 |
| help |
| The amount of anticipated heap usage in CAR by FSP. |
| Refer to Platform FSP integration guide document to know |
| the exact FSP requirement for Heap setup. The FSP integration |
| documentation says this needs to be at least 128KiB, but practice |
| show this needs to be 256KiB or more. |
| |
| config IED_REGION_SIZE |
| hex |
| default 0x400000 |
| |
| config IFD_CHIPSET |
| string |
| default "lbg" |
| |
| config SOC_INTEL_COMMON_BLOCK_P2SB |
| def_bool y |
| |
| config SOC_INTEL_HAS_BIOS_DONE_MSR |
| def_bool y |
| |
| config SOC_INTEL_HAS_NCMEM |
| def_bool y |
| |
| config SOC_INTEL_HAS_CXL |
| def_bool y |
| |
| config SOC_INTEL_PCIE_64BIT_ALLOC |
| def_bool y |
| |
| config SOC_INTEL_MMAPVTD_ONLY_FOR_DPR |
| def_bool y |
| |
| config CPU_BCLK_MHZ |
| int |
| default 100 |
| |
| # SPR-SP has 4 IMCs, 2 channels per IMC, 2 DIMMs per channel |
| # Default value is set to two sockets, full config. |
| config MAX_IMC |
| int |
| default 4 |
| |
| config MAX_MC_CHN |
| int |
| default 2 |
| |
| config DIMM_MAX |
| int |
| default 32 |
| |
| # DDR4 |
| config DIMM_SPD_SIZE |
| int |
| default 1024 |
| |
| config MAX_ACPI_TABLE_SIZE_KB |
| int |
| default 400 if MAX_SOCKET = 4 |
| default 224 |
| |
| config FIXED_SMBUS_IO_BASE |
| default 0x780 |
| |
| config DISPLAY_UPD_IIO_DATA |
| def_bool n |
| depends on DISPLAY_UPD_DATA |
| |
| if INTEL_TXT |
| |
| config INTEL_TXT_SINIT_SIZE |
| hex |
| default 0x50000 |
| help |
| According to document number 572782 this needs to be 256KiB |
| for the SINIT module and 64KiB for SINIT data. |
| |
| config INTEL_TXT_HEAP_SIZE |
| hex |
| default 0xf0000 |
| help |
| This must be 960KiB according to 572782. |
| |
| endif # INTEL_TXT |
| |
| endif |