| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <stdint.h> |
| #include <acpi/acpi.h> |
| #include <northbridge/intel/sandybridge/sandybridge.h> |
| #include <northbridge/intel/sandybridge/raminit.h> |
| #include <northbridge/intel/sandybridge/raminit_native.h> |
| #include <southbridge/intel/bd82x6x/pch.h> |
| #include <southbridge/intel/common/gpio.h> |
| |
| void mainboard_fill_pei_data(struct pei_data *pei_data) |
| { |
| struct pei_data pei_data_template = { |
| .pei_version = PEI_VERSION, |
| .mchbar = (uintptr_t)DEFAULT_MCHBAR, |
| .dmibar = (uintptr_t)DEFAULT_DMIBAR, |
| .epbar = DEFAULT_EPBAR, |
| .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, |
| .smbusbar = SMBUS_IO_BASE, |
| .wdbbar = 0x4000000, |
| .wdbsize = 0x1000, |
| .hpet_address = CONFIG_HPET_ADDRESS, |
| .rcba = (uintptr_t)DEFAULT_RCBABASE, |
| .pmbase = DEFAULT_PMBASE, |
| .gpiobase = DEFAULT_GPIOBASE, |
| .thermalbase = 0xfed08000, |
| .system_type = 0, // 0 Mobile, 1 Desktop/Server |
| .tseg_size = CONFIG_SMM_TSEG_SIZE, |
| .spd_addresses = { 0xa0, 0x00,0xa2,0x00 }, |
| .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, |
| .ec_present = 1, |
| .gbe_enable = 1, |
| // 0 = leave channel enabled |
| // 1 = disable dimm 0 on channel |
| // 2 = disable dimm 1 on channel |
| // 3 = disable dimm 0+1 on channel |
| .dimm_channel0_disabled = 2, |
| .dimm_channel1_disabled = 2, |
| .max_ddr3_freq = 1333, |
| .usb_port_config = { |
| { 1, 0, 0x0040 }, |
| { 1, 1, 0x0080 }, |
| { 1, 3, 0x0080 }, |
| { 1, 3, 0x0080 }, |
| { 1, 0, 0x0080 }, |
| { 1, 0, 0x0080 }, |
| { 1, 2, 0x0040 }, |
| { 1, 2, 0x0040 }, |
| { 1, 6, 0x0080 }, |
| { 1, 5, 0x0080 }, |
| { 1, 6, 0x0080 }, |
| { 1, 6, 0x0080 }, |
| { 1, 7, 0x0080 }, |
| { 1, 6, 0x0080 }, |
| }, |
| }; |
| *pei_data = pei_data_template; |
| } |
| |
| void mainboard_get_spd(spd_raw_data *spd, bool id_only) |
| { |
| read_spd (&spd[0], 0x50, id_only); |
| read_spd (&spd[2], 0x51, id_only); |
| } |
| |
| int mainboard_should_reset_usb(int s3resume) |
| { |
| return !s3resume; |
| } |