| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2007-2008 coresystems GmbH |
| * Copyright (C) 2014 Google Inc. |
| * Copyright (C) 2017-2018 Intel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #ifndef _SOC_CHIP_H_ |
| #define _SOC_CHIP_H_ |
| |
| #include <intelblocks/chip.h> |
| #include <drivers/i2c/designware/dw_i2c.h> |
| #include <intelblocks/gspi.h> |
| #include <stdint.h> |
| #include <soc/gpio.h> |
| #include <soc/pch.h> |
| #include <soc/pci_devs.h> |
| #include <soc/pm.h> |
| #include <soc/pmc.h> |
| #include <soc/serialio.h> |
| #include <soc/usb.h> |
| #include <soc/vr_config.h> |
| #if IS_ENABLED(CONFIG_SOC_INTEL_CANNONLAKE_PCH_H) |
| #include <soc/gpio_defs_cnp_h.h> |
| #else |
| #include <soc/gpio_defs.h> |
| #endif |
| |
| struct soc_intel_cannonlake_config { |
| |
| /* Common struct containing soc config data required by common code */ |
| struct soc_intel_common_config common_soc_config; |
| |
| /* GPE configuration */ |
| uint32_t gpe0_en_1; /* GPE0_EN_31_0 */ |
| uint32_t gpe0_en_2; /* GPE0_EN_63_32 */ |
| uint32_t gpe0_en_3; /* GPE0_EN_95_64 */ |
| uint32_t gpe0_en_4; /* GPE0_EN_127_96 / GPE_STD */ |
| |
| /* Gpio group routed to each dword of the GPE0 block. Values are |
| * of the form GPP_[A:G] or GPD. */ |
| uint8_t gpe0_dw0; /* GPE0_31_0 STS/EN */ |
| uint8_t gpe0_dw1; /* GPE0_63_32 STS/EN */ |
| uint8_t gpe0_dw2; /* GPE0_95_64 STS/EN */ |
| |
| /* Generic IO decode ranges */ |
| uint32_t gen1_dec; |
| uint32_t gen2_dec; |
| uint32_t gen3_dec; |
| uint32_t gen4_dec; |
| |
| /* Enable S0iX support */ |
| int s0ix_enable; |
| /* Enable DPTF support */ |
| int dptf_enable; |
| |
| /* Deep SX enable for both AC and DC */ |
| int deep_s3_enable_ac; |
| int deep_s3_enable_dc; |
| int deep_s5_enable_ac; |
| int deep_s5_enable_dc; |
| |
| /* Deep Sx Configuration |
| * DSX_EN_WAKE_PIN - Enable WAKE# pin |
| * DSX_EN_LAN_WAKE_PIN - Enable LAN_WAKE# pin |
| * DSX_DIS_AC_PRESENT_PD - Disable pull-down on AC_PRESENT pin */ |
| uint32_t deep_sx_config; |
| |
| /* TCC activation offset */ |
| uint32_t tcc_offset; |
| |
| uint64_t PlatformMemorySize; |
| uint8_t SmramMask; |
| uint8_t MrcFastBoot; |
| uint32_t TsegSize; |
| uint16_t MmioSize; |
| |
| /* DDR Frequency Limit. Maximum Memory Frequency Selections in Mhz. |
| * Options : 1067, 1333, 1600, 1867, 2133, 2400, 2667, 2933, 0(Auto) */ |
| uint16_t DdrFreqLimit; |
| |
| /* SAGV Low Frequency Selections in Mhz. |
| * Options : 1067, 1333, 1600, 1867, 2133, 2400, 2667, 2933, 0(Auto) */ |
| uint16_t FreqSaGvLow; |
| |
| /* SAGV Mid Frequency Selections in Mhz. |
| * Options : 1067, 1333, 1600, 1867, 2133, 2400, 2667, 2933, 0(Auto) */ |
| uint16_t FreqSaGvMid; |
| |
| /* System Agent dynamic frequency support. Only effects ULX/ULT CPUs. |
| * For CNL, options are as following |
| * When enabled, memory will be training at three different frequencies. |
| * 0:Disabled, 1:FixedLow, 2:FixedMid, 3:FixedHigh, 4:Enabled |
| * For WHL/CFL options are as following |
| * When enabled, memory will be training at two different frequencies. |
| * 0:Disabled, 1:FixedLow, 2:FixedHigh, 3:Enabled*/ |
| enum { |
| SaGv_Disabled, |
| SaGv_FixedLow, |
| #if !IS_ENABLED(CONFIG_SOC_INTEL_COMMON_CANNONLAKE_BASE) |
| SaGv_FixedMid, |
| #endif |
| SaGv_FixedHigh, |
| SaGv_Enabled, |
| } SaGv; |
| |
| |
| /* Rank Margin Tool. 1:Enable, 0:Disable */ |
| uint8_t RMT; |
| |
| /* USB related */ |
| struct usb2_port_config usb2_ports[16]; |
| struct usb3_port_config usb3_ports[10]; |
| uint8_t SsicPortEnable; |
| /* Wake Enable Bitmap for USB2 ports */ |
| uint16_t usb2_wake_enable_bitmap; |
| /* Wake Enable Bitmap for USB3 ports */ |
| uint16_t usb3_wake_enable_bitmap; |
| |
| /* SATA related */ |
| enum { |
| Sata_AHCI, |
| Sata_RAID, |
| } SataMode; |
| uint8_t SataSalpSupport; |
| uint8_t SataPortsEnable[8]; |
| uint8_t SataPortsDevSlp[8]; |
| |
| /* Audio related */ |
| uint8_t PchHdaDspEnable; |
| |
| /* Enable/Disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1 */ |
| uint8_t PchHdaAudioLinkHda; |
| uint8_t PchHdaAudioLinkDmic0; |
| uint8_t PchHdaAudioLinkDmic1; |
| uint8_t PchHdaAudioLinkSsp0; |
| uint8_t PchHdaAudioLinkSsp1; |
| uint8_t PchHdaAudioLinkSsp2; |
| uint8_t PchHdaAudioLinkSndw1; |
| uint8_t PchHdaAudioLinkSndw2; |
| uint8_t PchHdaAudioLinkSndw3; |
| uint8_t PchHdaAudioLinkSndw4; |
| |
| /* PCIe Root Ports */ |
| uint8_t PcieRpEnable[CONFIG_MAX_ROOT_PORTS]; |
| /* PCIe output clocks type to Pcie devices. |
| * 0-23: PCH rootport, 0x70: LAN, 0x80: unspecified but in use, |
| * 0xFF: not used */ |
| uint8_t PcieClkSrcUsage[CONFIG_MAX_ROOT_PORTS]; |
| /* PCIe ClkReq-to-ClkSrc mapping, number of clkreq signal assigned to |
| * clksrc. */ |
| uint8_t PcieClkSrcClkReq[CONFIG_MAX_ROOT_PORTS]; |
| /* PCIe LTR(Latency Tolerance Reporting) mechanism */ |
| uint8_t PcieRpLtrEnable[CONFIG_MAX_ROOT_PORTS]; |
| |
| /* eMMC and SD */ |
| uint8_t ScsEmmcHs400Enabled; |
| /* Need to update DLL setting to get Emmc running at HS400 speed */ |
| uint8_t EmmcHs400DllNeed; |
| /* 0-39: number of active delay for RX strobe, unit is 125 psec */ |
| uint8_t EmmcHs400RxStrobeDll1; |
| /* 0-78: number of active delay for TX data, unit is 125 psec */ |
| uint8_t EmmcHs400TxDataDll; |
| |
| /* Integrated Sensor */ |
| uint8_t PchIshEnable; |
| |
| /* Heci related */ |
| uint8_t Heci3Enabled; |
| |
| /* Gfx related */ |
| uint8_t IgdDvmt50PreAlloc; |
| uint8_t InternalGfx; |
| uint8_t SkipExtGfxScan; |
| |
| uint32_t GraphicsConfigPtr; |
| uint8_t Device4Enable; |
| |
| /* GPIO IRQ Select. The valid value is 14 or 15 */ |
| uint8_t GpioIrqRoute; |
| /* SCI IRQ Select. The valid value is 9, 10, 11, 20, 21, 22, 23 */ |
| uint8_t SciIrqSelect; |
| /* TCO IRQ Select. The valid value is 9, 10, 11, 20, 21, 22, 23 */ |
| uint8_t TcoIrqSelect; |
| uint8_t TcoIrqEnable; |
| |
| /* VrConfig Settings for 5 domains |
| * 0 = System Agent, 1 = IA Core, 2 = Ring, |
| * 3 = GT unsliced, 4 = GT sliced */ |
| struct vr_config domain_vr_config[NUM_VR_DOMAINS]; |
| /* HeciEnabled decides the state of Heci1 at end of boot |
| * Setting to 0 (default) disables Heci1 and hides the device from OS */ |
| uint8_t HeciEnabled; |
| |
| /* PL1 Override value in Watts */ |
| uint32_t tdp_pl1_override; |
| /* PL2 Override value in Watts */ |
| uint32_t tdp_pl2_override; |
| /* SysPL2 Value in Watts */ |
| uint32_t tdp_psyspl2; |
| /* SysPL3 Value in Watts */ |
| uint32_t tdp_psyspl3; |
| /* SysPL3 window size */ |
| uint32_t tdp_psyspl3_time; |
| /* SysPL3 duty cycle */ |
| uint32_t tdp_psyspl3_dutycycle; |
| /* PL4 Value in Watts */ |
| uint32_t tdp_pl4; |
| |
| /* Intel Speed Shift Technology */ |
| uint8_t speed_shift_enable; |
| /* Enable VR specific mailbox command |
| * 00b - no VR specific cmd sent |
| * 01b - VR mailbox cmd specifically for the MPS IMPV8 VR will be sent |
| * 10b - VR specific cmd sent for PS4 exit issue |
| * 11b - Reserved */ |
| uint8_t SendVrMbxCmd; |
| |
| /* Enable/Disable EIST. 1b:Enabled, 0b:Disabled */ |
| uint8_t eist_enable; |
| |
| /* Statically clock gate 8254 PIT. */ |
| uint8_t clock_gate_8254; |
| /* Enable C6 DRAM */ |
| uint8_t enable_c6dram; |
| /* |
| * PRMRR size setting with below options |
| * 0x00100000 - 1MiB |
| * 0x02000000 - 32MiB and beyond |
| */ |
| uint32_t PrmrrSize; |
| uint8_t PmTimerDisabled; |
| |
| /* |
| * SLP_S3 Minimum Assertion Width Policy |
| * 1 = 60us |
| * 2 = 1ms (default) |
| * 3 = 50ms |
| * 4 = 2s |
| */ |
| uint8_t PchPmSlpS3MinAssert; |
| |
| /* |
| * SLP_S4 Minimum Assertion Width Policy |
| * 1 = 1s |
| * 2 = 2s |
| * 3 = 3s |
| * 4 = 4s (default) |
| */ |
| uint8_t PchPmSlpS4MinAssert; |
| |
| /* |
| * SLP_SUS Minimum Assertion Width Policy |
| * 1 = 0ms |
| * 2 = 500ms |
| * 3 = 1s (default) |
| * 4 = 4s |
| */ |
| uint8_t PchPmSlpSusMinAssert; |
| |
| /* |
| * SLP_A Minimum Assertion Width Policy |
| * 1 = 0ms |
| * 2 = 4s |
| * 3 = 98ms (default) |
| * 4 = 2s |
| */ |
| uint8_t PchPmSlpAMinAssert; |
| |
| /* Desired platform debug type. */ |
| enum { |
| DebugConsent_Disabled, |
| DebugConsent_DCI_DBC, |
| DebugConsent_DCI, |
| DebugConsent_USB3_DBC, |
| DebugConsent_XDP, /* XDP/Mipi60 */ |
| DebugConsent_USB2_DBC, |
| } DebugConsent; |
| /* |
| * SerialIO device mode selection: |
| * |
| * Device index: |
| * PchSerialIoIndexI2C0 |
| * PchSerialIoIndexI2C1 |
| * PchSerialIoIndexI2C2 |
| * PchSerialIoIndexI2C3 |
| * PchSerialIoIndexI2C4 |
| * PchSerialIoIndexI2C5 |
| * PchSerialIoIndexSPI0 |
| * PchSerialIoIndexSPI1 |
| * PchSerialIoIndexSPI2 |
| * PchSerialIoIndexUART0 |
| * PchSerialIoIndexUART1 |
| * PchSerialIoIndexUART2 |
| * |
| * Mode select: |
| * PchSerialIoDisabled |
| * PchSerialIoPci |
| * PchSerialIoAcpi |
| * PchSerialIoHidden |
| */ |
| uint8_t SerialIoDevMode[PchSerialIoIndexMAX]; |
| |
| /* GPIO SD card detect pin */ |
| unsigned int sdcard_cd_gpio; |
| |
| /* Enable Pch iSCLK */ |
| uint8_t pch_isclk; |
| |
| /* Intel VT configuration */ |
| uint8_t VtdDisable; |
| uint8_t VmxEnable; |
| |
| /* |
| * Acoustic Noise Mitigation |
| * 0b - Disable |
| * 1b - Enable noise mitigation |
| */ |
| uint8_t AcousticNoiseMitigation; |
| |
| /* |
| * Disable Fast Package C-state ramping |
| * Need to set AcousticNoiseMitigation = '1' first |
| * 0b - Enabled |
| * 1b - Disabled |
| */ |
| uint8_t FastPkgCRampDisableIa; |
| uint8_t FastPkgCRampDisableGt; |
| uint8_t FastPkgCRampDisableSa; |
| uint8_t FastPkgCRampDisableFivr; |
| |
| /* |
| * Adjust the VR slew rates |
| * Need to set AcousticNoiseMitigation = '1' first |
| * 000b - Fast/2 |
| * 001b - Fast/4 |
| * 010b - Fast/8 |
| * 011b - Fast/16 |
| */ |
| uint8_t SlowSlewRateForIa; |
| uint8_t SlowSlewRateForGt; |
| uint8_t SlowSlewRateForSa; |
| uint8_t SlowSlewRateForFivr; |
| |
| /* DMI Power Optimizer */ |
| uint8_t dmipwroptimize; |
| |
| /* SATA Power Optimizer */ |
| uint8_t satapwroptimize; |
| }; |
| |
| typedef struct soc_intel_cannonlake_config config_t; |
| |
| #endif |