| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <acpi/acpi.h> |
| #include <boot/coreboot_tables.h> |
| #include <gpio.h> |
| #include <soc/gpio.h> |
| #include <variant/gpio.h> |
| #include <vendorcode/google/chromeos/chromeos.h> |
| #include <security/tpm/tss.h> |
| #include <device/device.h> |
| #include <intelblocks/pmclib.h> |
| |
| enum rec_mode_state { |
| REC_MODE_UNINITIALIZED, |
| REC_MODE_NOT_REQUESTED, |
| REC_MODE_REQUESTED, |
| }; |
| |
| void fill_lb_gpios(struct lb_gpios *gpios) |
| { |
| struct lb_gpio chromeos_gpios[] = { |
| {-1, ACTIVE_HIGH, get_lid_switch(), "lid"}, |
| {-1, ACTIVE_HIGH, 0, "power"}, |
| {-1, ACTIVE_HIGH, gfx_get_init_done(), "oprom"}, |
| {-1, ACTIVE_HIGH, 0, "EC in RW"}, |
| }; |
| lb_add_gpios(gpios, chromeos_gpios, ARRAY_SIZE(chromeos_gpios)); |
| } |
| |
| static int cros_get_gpio_value(int type) |
| { |
| const struct cros_gpio *cros_gpios; |
| size_t i, num_gpios = 0; |
| |
| cros_gpios = variant_cros_gpios(&num_gpios); |
| |
| for (i = 0; i < num_gpios; i++) { |
| const struct cros_gpio *gpio = &cros_gpios[i]; |
| if (gpio->type == type) { |
| int state = gpio_get(gpio->gpio_num); |
| if (gpio->polarity == CROS_GPIO_ACTIVE_LOW) |
| return !state; |
| else |
| return state; |
| } |
| } |
| return 0; |
| } |
| |
| void mainboard_chromeos_acpi_generate(void) |
| { |
| const struct cros_gpio *cros_gpios; |
| size_t num_gpios = 0; |
| |
| cros_gpios = variant_cros_gpios(&num_gpios); |
| |
| chromeos_acpi_gpio_generate(cros_gpios, num_gpios); |
| } |
| |
| int get_write_protect_state(void) |
| { |
| return cros_get_gpio_value(CROS_GPIO_WP); |
| } |
| |
| int get_recovery_mode_switch(void) |
| { |
| static enum rec_mode_state saved_rec_mode = REC_MODE_UNINITIALIZED; |
| enum rec_mode_state state = REC_MODE_NOT_REQUESTED; |
| uint8_t cr50_state = 0; |
| |
| /* Check cached state, since TPM will only tell us the first time */ |
| if (saved_rec_mode != REC_MODE_UNINITIALIZED) |
| return saved_rec_mode == REC_MODE_REQUESTED; |
| |
| /* |
| * Read one-time recovery request from cr50 in verstage only since |
| * the TPM driver won't be set up in time for other stages like romstage |
| * and the value from the TPM would be wrong anyway since the verstage |
| * read would have cleared the value on the TPM. |
| * |
| * The TPM recovery request is passed between stages through vboot data |
| * or cbmem depending on stage. |
| */ |
| if (ENV_SEPARATE_VERSTAGE && |
| tlcl_cr50_get_recovery_button(&cr50_state) == TPM_SUCCESS && |
| cr50_state) |
| state = REC_MODE_REQUESTED; |
| |
| /* Read state from the GPIO controlled by servo. */ |
| if (cros_get_gpio_value(CROS_GPIO_REC)) |
| state = REC_MODE_REQUESTED; |
| |
| /* Store the state in case this is called again in verstage. */ |
| saved_rec_mode = state; |
| |
| return state == REC_MODE_REQUESTED; |
| } |
| |
| int get_lid_switch(void) |
| { |
| return 1; |
| } |
| |
| void mainboard_prepare_cr50_reset(void) |
| { |
| /* Ensure system powers up after CR50 reset */ |
| if (ENV_RAMSTAGE) |
| pmc_soc_set_afterg3_en(true); |
| } |
| |
| int get_ec_is_trusted(void) |
| { |
| /* Do not have a Chrome EC involved in entering recovery mode; |
| Always return trusted. */ |
| return 1; |
| } |