| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2003 Eric Biederman |
| * Copyright (C) 2006-2010 coresystems GmbH |
| * Copyright (C) 2014 Imagination Technologies |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; version 2 of |
| * the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <arch/io.h> |
| #include <boot/coreboot_tables.h> |
| #include <console/console.h> |
| #include <console/uart.h> |
| #include <device/device.h> |
| #include <delay.h> |
| #include <drivers/uart/uart8250reg.h> |
| |
| /* Should support 8250, 16450, 16550, 16550A type UARTs */ |
| |
| /* Expected character delay at 1200bps is 9ms for a working UART |
| * and no flow-control. Assume UART as stuck if shift register |
| * or FIFO takes more than 50ms per character to appear empty. |
| */ |
| #define SINGLE_CHAR_TIMEOUT (50 * 1000) |
| #define FIFO_TIMEOUT (16 * SINGLE_CHAR_TIMEOUT) |
| #define UART_SHIFT 2 |
| |
| #define GEN_ACCESSOR(name, idx) \ |
| static inline uint8_t read_##name(unsigned base_port) \ |
| { \ |
| return read8(base_port + (idx << UART_SHIFT)); \ |
| } \ |
| \ |
| static inline void write_##name(unsigned base_port, uint8_t val) \ |
| { \ |
| write8(base_port + (idx << UART_SHIFT), val); \ |
| } |
| |
| GEN_ACCESSOR(rbr, UART8250_RBR) |
| GEN_ACCESSOR(tbr, UART8250_TBR) |
| GEN_ACCESSOR(ier, UART8250_IER) |
| GEN_ACCESSOR(fcr, UART8250_FCR) |
| GEN_ACCESSOR(lcr, UART8250_LCR) |
| GEN_ACCESSOR(mcr, UART8250_MCR) |
| GEN_ACCESSOR(lsr, UART8250_LSR) |
| GEN_ACCESSOR(dll, UART8250_DLL) |
| GEN_ACCESSOR(dlm, UART8250_DLM) |
| |
| static int uart8250_mem_can_tx_byte(unsigned base_port) |
| { |
| return read_lsr(base_port) & UART8250_LSR_THRE; |
| } |
| |
| static void uart8250_mem_tx_byte(unsigned base_port, unsigned char data) |
| { |
| unsigned long int i = SINGLE_CHAR_TIMEOUT; |
| while (i-- && !uart8250_mem_can_tx_byte(base_port)) |
| udelay(1); |
| write_tbr(base_port, data); |
| } |
| |
| static void uart8250_mem_tx_flush(unsigned base_port) |
| { |
| unsigned long int i = FIFO_TIMEOUT; |
| while (i-- && !(read_lsr(base_port) & UART8250_LSR_TEMT)) |
| udelay(1); |
| } |
| |
| static int uart8250_mem_can_rx_byte(unsigned base_port) |
| { |
| return read_lsr(base_port) & UART8250_LSR_DR; |
| } |
| |
| static unsigned char uart8250_mem_rx_byte(unsigned base_port) |
| { |
| unsigned long int i = SINGLE_CHAR_TIMEOUT; |
| while (i-- && !uart8250_mem_can_rx_byte(base_port)) |
| udelay(1); |
| if (i) |
| return read_rbr(base_port); |
| else |
| return 0x0; |
| } |
| |
| static void uart8250_mem_init(unsigned base_port, unsigned divisor) |
| { |
| /* Disable interrupts */ |
| write_ier(base_port, 0x0); |
| /* Enable FIFOs */ |
| write_fcr(base_port, UART8250_FCR_FIFO_EN); |
| |
| /* Assert DTR and RTS so the other end is happy */ |
| write_mcr(base_port, UART8250_MCR_DTR | UART8250_MCR_RTS); |
| |
| /* DLAB on */ |
| write_lcr(base_port, UART8250_LCR_DLAB | CONFIG_TTYS0_LCS); |
| |
| write_dll(base_port, divisor & 0xFF); |
| write_dlm(base_port, (divisor >> 8) & 0xFF); |
| |
| /* Set to 3 for 8N1 */ |
| write_lcr(base_port, CONFIG_TTYS0_LCS); |
| } |
| |
| unsigned int uart_platform_refclk(void) |
| { |
| /* 1.8433179 MHz */ |
| return 1843318; |
| } |
| |
| void uart_init(int idx) |
| { |
| u32 base = CONFIG_CONSOLE_SERIAL_UART_ADDRESS; |
| if (!base) |
| return; |
| |
| unsigned int div; |
| div = uart_baudrate_divisor(CONFIG_TTYS0_BAUD, |
| uart_platform_refclk(), 16); |
| uart8250_mem_init(base, div); |
| } |
| |
| void uart_tx_byte(int idx, unsigned char data) |
| { |
| uart8250_mem_tx_byte(CONFIG_CONSOLE_SERIAL_UART_ADDRESS, data); |
| } |
| |
| unsigned char uart_rx_byte(int idx) |
| { |
| return uart8250_mem_rx_byte(CONFIG_CONSOLE_SERIAL_UART_ADDRESS); |
| } |
| |
| void uart_tx_flush(int idx) |
| { |
| uart8250_mem_tx_flush(CONFIG_CONSOLE_SERIAL_UART_ADDRESS); |
| } |
| |
| #ifndef __PRE_RAM__ |
| void uart_fill_lb(void *data) |
| { |
| struct lb_serial serial; |
| serial.type = LB_SERIAL_TYPE_MEMORY_MAPPED; |
| serial.baseaddr = CONFIG_CONSOLE_SERIAL_UART_ADDRESS; |
| serial.baud = default_baudrate(); |
| serial.regwidth = 1 << UART_SHIFT; |
| lb_add_serial(&serial, data); |
| |
| lb_add_console(LB_TAG_CONSOLE_SERIAL8250MEM, data); |
| } |
| #endif |