kunimitsu: Add FSP 2.0 support in romstage
Populate mainboard related Memory Init Params i.e, SPD
Rcomp values, DQ and DQs values.
Change-Id: Id62c43a72a0e34fa2e8d177ce895d395418e2347
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/16316
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
diff --git a/src/mainboard/intel/kunimitsu/devicetree.cb b/src/mainboard/intel/kunimitsu/devicetree.cb
index 2aa3d95..a5789b0 100644
--- a/src/mainboard/intel/kunimitsu/devicetree.cb
+++ b/src/mainboard/intel/kunimitsu/devicetree.cb
@@ -187,6 +187,9 @@
# Send an extra VR mailbox command for the PS4 exit issue
register "SendVrMbxCmd" = "2"
+ # Enable/Disable VMX feature
+ register "VmxEnable" = "0"
+
# Use default SD card detect GPIO configuration
register "sdcard_cd_gpio_default" = "GPP_A7"
diff --git a/src/mainboard/intel/kunimitsu/pei_data.c b/src/mainboard/intel/kunimitsu/pei_data.c
index 3b0237e..6a21124 100644
--- a/src/mainboard/intel/kunimitsu/pei_data.c
+++ b/src/mainboard/intel/kunimitsu/pei_data.c
@@ -19,47 +19,12 @@
#include <soc/pei_data.h>
#include <soc/pei_wrapper.h>
#include "boardid.h"
-
-/* PCH_MEM_CFG[3:0] */
-#define MAX_MEMORY_CONFIG 0x10
-#define RCOMP_TARGET_PARAMS 0x5
-#define K4E6E304EE_MEM_ID 0x3
+#include "spd/spd.h"
void mainboard_fill_pei_data(struct pei_data *pei_data)
{
- /* DQ byte map */
- const u8 dq_map[2][12] = {
- { 0x0F, 0xF0, 0x00, 0xF0, 0x0F, 0xF0 ,
- 0x0F, 0x00, 0xFF, 0x00, 0xFF, 0x00 },
- { 0x0F, 0xF0, 0x00, 0xF0, 0x0F, 0xF0 ,
- 0x0F, 0x00, 0xFF, 0x00, 0xFF, 0x00 } };
- /* DQS CPU<>DRAM map */
- const u8 dqs_map[2][8] = {
- { 0, 1, 3, 2, 6, 5, 4, 7 },
- { 2, 3, 0, 1, 6, 7, 4, 5 } };
-
- /* Rcomp resistor */
- const u16 RcompResistor[3] = { 200, 81, 162 };
-
- /* Rcomp target */
- static const u16 RcompTarget[RCOMP_TARGET_PARAMS] = {
- 100, 40, 40, 23, 40 };
-
- /*Strengthen the Rcomp Target Ctrl for 8GB K4E6E304EE -EGCF*/
- static const u16 StrengthendRcompTarget[RCOMP_TARGET_PARAMS] = {
- 100, 40, 40, 21, 40 };
-
-
- memcpy(pei_data->dq_map, dq_map, sizeof(dq_map));
- memcpy(pei_data->dqs_map, dqs_map, sizeof(dqs_map));
- memcpy(pei_data->RcompResistor, RcompResistor,
- sizeof(RcompResistor));
- if (pei_data->mem_cfg_id == K4E6E304EE_MEM_ID) {
- memcpy(pei_data->RcompTarget, StrengthendRcompTarget,
- sizeof(StrengthendRcompTarget));
- } else {
- memcpy(pei_data->RcompTarget, RcompTarget,
- sizeof(RcompTarget));
- }
-
+ mainboard_fill_dq_map_data(&pei_data->dq_map);
+ mainboard_fill_dqs_map_data(&pei_data->dqs_map);
+ mainboard_fill_rcomp_res_data(&pei_data->RcompResistor);
+ mainboard_fill_rcomp_strength_data(&pei_data->RcompTarget);
}
diff --git a/src/mainboard/intel/kunimitsu/romstage.c b/src/mainboard/intel/kunimitsu/romstage.c
index 84c2b6f..29ffb61 100644
--- a/src/mainboard/intel/kunimitsu/romstage.c
+++ b/src/mainboard/intel/kunimitsu/romstage.c
@@ -25,16 +25,7 @@
void mainboard_romstage_entry(struct romstage_params *params)
{
- /* PCH_MEM_CFG[3:0] */
- gpio_t spd_gpios[] = {
- GPIO_MEM_CONFIG_0,
- GPIO_MEM_CONFIG_1,
- GPIO_MEM_CONFIG_2,
- GPIO_MEM_CONFIG_3,
- };
-
- params->pei_data->mem_cfg_id = gpio_base2_value(spd_gpios,
- ARRAY_SIZE(spd_gpios));
+ params->pei_data->mem_cfg_id = get_spd_index();
/* Fill out PEI DATA */
mainboard_fill_pei_data(params->pei_data);
mainboard_fill_spd_data(params->pei_data);
diff --git a/src/mainboard/intel/kunimitsu/romstage_fsp20.c b/src/mainboard/intel/kunimitsu/romstage_fsp20.c
index 10bdd21..d4fd113 100644
--- a/src/mainboard/intel/kunimitsu/romstage_fsp20.c
+++ b/src/mainboard/intel/kunimitsu/romstage_fsp20.c
@@ -13,9 +13,30 @@
* GNU General Public License for more details.
*/
+#include <arch/byteorder.h>
+#include <cbfs.h>
+#include <console/console.h>
+#include <fsp/api.h>
+#include <gpio.h>
+#include "gpio.h"
#include <soc/romstage.h>
+#include <soc/gpio.h>
+#include "spd/spd.h"
+#include <string.h>
-void mainboard_memory_init_params(struct FSPM_UPD *mupd)
+void mainboard_memory_init_params(FSPM_UPD *mupd)
{
- /* TODO: Read and copy SPD and fill up Rcomp and DQ param */
+ FSP_M_CONFIG *mem_cfg;
+ mem_cfg = &mupd->FspmConfig;
+
+ mainboard_fill_dq_map_data(&mem_cfg->DqByteMapCh0);
+ mainboard_fill_dqs_map_data(&mem_cfg->DqsMapCpu2DramCh0);
+ mainboard_fill_rcomp_res_data(&mem_cfg->RcompResistor);
+ mainboard_fill_rcomp_strength_data(&mem_cfg->RcompTarget);
+
+ mem_cfg->DqPinsInterleaved = 0;
+ mem_cfg->MemorySpdPtr00 = mainboard_get_spd_data();
+ if (mainboard_has_dual_channel_mem())
+ mem_cfg->MemorySpdPtr10 = mem_cfg->MemorySpdPtr00;
+ mem_cfg->MemorySpdDataLen = SPD_LEN;
}
diff --git a/src/mainboard/intel/kunimitsu/spd/Makefile.inc b/src/mainboard/intel/kunimitsu/spd/Makefile.inc
index 0a9cb0f..9856368e 100644
--- a/src/mainboard/intel/kunimitsu/spd/Makefile.inc
+++ b/src/mainboard/intel/kunimitsu/spd/Makefile.inc
@@ -15,6 +15,7 @@
##
romstage-$(CONFIG_PLATFORM_USES_FSP1_1) += spd.c
+romstage-y += spd_util.c
SPD_BIN = $(obj)/spd.bin
diff --git a/src/mainboard/intel/kunimitsu/spd/spd.c b/src/mainboard/intel/kunimitsu/spd/spd.c
index faf6791..fe30621 100644
--- a/src/mainboard/intel/kunimitsu/spd/spd.c
+++ b/src/mainboard/intel/kunimitsu/spd/spd.c
@@ -77,39 +77,13 @@
/* Copy SPD data for on-board memory */
void mainboard_fill_spd_data(struct pei_data *pei_data)
{
- char *spd_file;
- size_t spd_file_len;
- int spd_index, spd_span;
+ uintptr_t spd_data;
+ spd_data = mainboard_get_spd_data();
+ memcpy(pei_data->spd_data[0][0], (void *)spd_data, SPD_LEN);
- spd_index = pei_data->mem_cfg_id;
- printk(BIOS_INFO, "SPD index %d\n", spd_index);
-
- /* Load SPD data from CBFS */
- spd_file = cbfs_boot_map_with_leak("spd.bin", CBFS_TYPE_SPD,
- &spd_file_len);
- if (!spd_file)
- die("SPD data not found.");
-
- /* make sure we have at least one SPD in the file. */
- if (spd_file_len < SPD_LEN)
- die("Missing SPD data.");
-
- /* Make sure we did not overrun the buffer */
- if (spd_file_len < ((spd_index + 1) * SPD_LEN)) {
- printk(BIOS_ERR, "SPD index override to 0 - old hardware?\n");
- spd_index = 0;
- }
-
- /* Assume same memory in both channels */
- spd_span = spd_index * SPD_LEN;
- memcpy(pei_data->spd_data[0][0], spd_file + spd_span, SPD_LEN);
-
- if (spd_index != HYNIX_SINGLE_CHAN && spd_index != SAMSUNG_SINGLE_CHAN
- && spd_index != MIC_SINGLE_CHAN) {
- memcpy(pei_data->spd_data[1][0], spd_file + spd_span, SPD_LEN);
- printk(BIOS_INFO, "Dual channel SPD detected writing second channel\n");
- }
+ if (mainboard_has_dual_channel_mem())
+ memcpy(pei_data->spd_data[1][0], (void *)spd_data, SPD_LEN);
/* Make sure a valid SPD was found */
if (pei_data->spd_data[0][0][0] == 0)
diff --git a/src/mainboard/intel/kunimitsu/spd/spd.h b/src/mainboard/intel/kunimitsu/spd/spd.h
index cdff9ce..f53c9ec 100644
--- a/src/mainboard/intel/kunimitsu/spd/spd.h
+++ b/src/mainboard/intel/kunimitsu/spd/spd.h
@@ -15,6 +15,10 @@
*/
#ifndef MAINBOARD_SPD_H
+
+#include <gpio.h>
+#include "../gpio.h"
+
#define MAINBOARD_SPD_H
#define SPD_LEN 256
@@ -33,4 +37,26 @@
#define HYNIX_SINGLE_CHAN 0x1
#define SAMSUNG_SINGLE_CHAN 0x4
#define MIC_SINGLE_CHAN 0x5
+
+/* PCH_MEM_CFG[3:0] */
+#define MAX_MEMORY_CONFIG 0x10
+#define RCOMP_TARGET_PARAMS 0x5
+#define K4E6E304EE_MEM_ID 0x3
+
+static inline int get_spd_index(void) {
+ /* PCH_MEM_CFG[3:0] */
+ gpio_t spd_gpios[] = {
+ GPIO_MEM_CONFIG_0,
+ GPIO_MEM_CONFIG_1,
+ GPIO_MEM_CONFIG_2,
+ GPIO_MEM_CONFIG_3,
+ };
+ return (gpio_base2_value(spd_gpios, ARRAY_SIZE(spd_gpios)));
+}
+void mainboard_fill_dq_map_data(void *dq_map_ptr);
+void mainboard_fill_dqs_map_data(void *dqs_map_ptr);
+void mainboard_fill_rcomp_res_data(void *rcomp_ptr);
+void mainboard_fill_rcomp_strength_data(void *rcomp_strength_ptr);
+uintptr_t mainboard_get_spd_data(void);
+int mainboard_has_dual_channel_mem(void);
#endif
diff --git a/src/mainboard/intel/kunimitsu/spd/spd_util.c b/src/mainboard/intel/kunimitsu/spd/spd_util.c
new file mode 100644
index 0000000..0ce2acf
--- /dev/null
+++ b/src/mainboard/intel/kunimitsu/spd/spd_util.c
@@ -0,0 +1,118 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2016 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <arch/byteorder.h>
+#include <cbfs.h>
+#include <console/console.h>
+#include <stdint.h>
+#include <string.h>
+#include <soc/pei_data.h>
+#include <soc/pei_wrapper.h>
+#include "boardid.h"
+#include "spd.h"
+
+void mainboard_fill_dq_map_data(void *dq_map_ptr)
+{
+ /* DQ byte map */
+ const u8 dq_map[2][12] = {
+ { 0x0F, 0xF0, 0x00, 0xF0, 0x0F, 0xF0 ,
+ 0x0F, 0x00, 0xFF, 0x00, 0xFF, 0x00 },
+ { 0x0F, 0xF0, 0x00, 0xF0, 0x0F, 0xF0 ,
+ 0x0F, 0x00, 0xFF, 0x00, 0xFF, 0x00 } };
+ memcpy(dq_map_ptr, dq_map, sizeof(dq_map));
+}
+
+void mainboard_fill_dqs_map_data(void *dqs_map_ptr)
+{
+ /* DQS CPU<>DRAM map */
+ const u8 dqs_map[2][8] = {
+ { 0, 1, 3, 2, 6, 5, 4, 7 },
+ { 2, 3, 0, 1, 6, 7, 4, 5 } };
+ memcpy(dqs_map_ptr, dqs_map, sizeof(dqs_map));
+}
+
+void mainboard_fill_rcomp_res_data(void *rcomp_ptr)
+{
+ /* Rcomp resistor */
+ const u16 RcompResistor[3] = { 200, 81, 162 };
+ memcpy(rcomp_ptr, RcompResistor,
+ sizeof(RcompResistor));
+}
+
+void mainboard_fill_rcomp_strength_data(void *rcomp_strength_ptr)
+{
+ int mem_cfg_id;
+
+ mem_cfg_id = get_spd_index();
+ /* Rcomp target */
+ static const u16 RcompTarget[RCOMP_TARGET_PARAMS] = {
+ 100, 40, 40, 23, 40 };
+
+ /* Strengthen the Rcomp Target Ctrl for 8GB K4E6E304EE -EGCF */
+ static const u16 StrengthendRcompTarget[RCOMP_TARGET_PARAMS] = {
+ 100, 40, 40, 21, 40 };
+
+
+ if (mem_cfg_id == K4E6E304EE_MEM_ID) {
+ memcpy(rcomp_strength_ptr, StrengthendRcompTarget,
+ sizeof(StrengthendRcompTarget));
+ } else {
+ memcpy(rcomp_strength_ptr, RcompTarget, sizeof(RcompTarget));
+ }
+
+}
+
+uintptr_t mainboard_get_spd_data(void)
+{
+ char* spd_file;
+ int spd_index, spd_span;
+ size_t spd_file_len;
+
+ spd_index = get_spd_index();
+ printk(BIOS_INFO, "SPD index %d\n", spd_index);
+
+ /* Load SPD data from CBFS */
+ spd_file = cbfs_boot_map_with_leak("spd.bin", CBFS_TYPE_SPD,
+ &spd_file_len);
+ if (!(*spd_file))
+ die("SPD data not found.");
+
+ /* make sure we have at least one SPD in the file. */
+ if (spd_file_len < SPD_LEN)
+ die("Missing SPD data.");
+
+ /* Make sure we did not overrun the buffer */
+ if (spd_file_len < ((spd_index + 1) * SPD_LEN)) {
+ printk(BIOS_ERR, "SPD index override to 0 - old hardware?\n");
+ spd_index = 0;
+ }
+
+ spd_span = spd_index * SPD_LEN;
+ return (uintptr_t)(spd_file + spd_span);
+}
+
+int mainboard_has_dual_channel_mem(void)
+{
+ int spd_index;
+
+ spd_index = get_spd_index();
+
+ if (spd_index != HYNIX_SINGLE_CHAN && spd_index != SAMSUNG_SINGLE_CHAN
+ && spd_index != MIC_SINGLE_CHAN) {
+ printk(BIOS_INFO,
+ "Dual channel SPD detected writing second channel\n");
+ return 1;
+ }
+ return 0;
+}