| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2016-2017 Intel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <bootmode.h> |
| #include <bootstate.h> |
| #include <device/pci.h> |
| #include <fsp/api.h> |
| #include <arch/acpi.h> |
| #include <device/pci_ops.h> |
| #include <console/console.h> |
| #include <device/device.h> |
| #include <device/pci_ids.h> |
| #include <fsp/util.h> |
| #include <intelblocks/chip.h> |
| #include <intelblocks/itss.h> |
| #include <intelblocks/lpc_lib.h> |
| #include <intelblocks/mp_init.h> |
| #include <intelblocks/xdci.h> |
| #include <intelpch/lockdown.h> |
| #include <romstage_handoff.h> |
| #include <soc/acpi.h> |
| #include <soc/intel/common/vbt.h> |
| #include <soc/interrupt.h> |
| #include <soc/iomap.h> |
| #include <soc/irq.h> |
| #include <soc/itss.h> |
| #include <soc/pci_devs.h> |
| #include <soc/ramstage.h> |
| #include <soc/systemagent.h> |
| #include <string.h> |
| |
| #include "chip.h" |
| |
| struct pcie_entry { |
| unsigned int devfn; |
| unsigned int func_count; |
| }; |
| |
| /* |
| * According to table 2-2 in doc#546717: |
| * PCI bus[function] ID |
| * D28:[F0 - F7] 0xA110 - 0xA117 |
| * D29:[F0 - F7] 0xA118 - 0xA11F |
| * D27:[F0 - F3] 0xA167 - 0xA16A |
| */ |
| static const struct pcie_entry pcie_table_skl_pch_h[] = { |
| {PCH_DEVFN_PCIE1, 8}, |
| {PCH_DEVFN_PCIE9, 8}, |
| {PCH_DEVFN_PCIE17, 4}, |
| }; |
| |
| /* |
| * According to table 2-2 in doc#564464: |
| * PCI bus[function] ID |
| * D28:[F0 - F7] 0xA290 - 0xA297 |
| * D29:[F0 - F7] 0xA298 - 0xA29F |
| * D27:[F0 - F7] 0xA2E7 - 0xA2EE |
| */ |
| static const struct pcie_entry pcie_table_kbl_pch_h[] = { |
| {PCH_DEVFN_PCIE1, 8}, |
| {PCH_DEVFN_PCIE9, 8}, |
| {PCH_DEVFN_PCIE17, 8}, |
| }; |
| |
| /* |
| * According to table 2-2 in doc#567995/545659: |
| * PCI bus[function] ID |
| * D28:[F0 - F7] 0x9D10 - 0x9D17 |
| * D29:[F0 - F3] 0x9D18 - 0x9D1B |
| */ |
| static const struct pcie_entry pcie_table_skl_pch_lp[] = { |
| {PCH_DEVFN_PCIE1, 8}, |
| {PCH_DEVFN_PCIE9, 4}, |
| }; |
| |
| /* |
| * If the PCIe root port at function 0 is disabled, |
| * the PCIe root ports might be coalesced after FSP silicon init. |
| * The below function will swap the devfn of the first enabled device |
| * in devicetree and function 0 resides a pci device |
| * so that it won't confuse coreboot. |
| */ |
| static void pcie_update_device_tree(const struct pcie_entry *pcie_rp_group, |
| size_t pci_groups) |
| { |
| struct device *func0; |
| unsigned int devfn, devfn0; |
| int i, group; |
| unsigned int inc = PCI_DEVFN(0, 1); |
| |
| for (group = 0; group < pci_groups; group++) { |
| devfn0 = pcie_rp_group[group].devfn; |
| func0 = pcidev_path_on_root(devfn0); |
| if (func0 == NULL) |
| continue; |
| |
| /* No more functions if function 0 is disabled. */ |
| if (pci_read_config32(func0, PCI_VENDOR_ID) == 0xffffffff) |
| continue; |
| |
| devfn = devfn0 + inc; |
| |
| /* |
| * Increase function by 1. |
| * Then find first enabled device to replace func0 |
| * as that port was move to func0. |
| */ |
| for (i = 1; i < pcie_rp_group[group].func_count; |
| i++, devfn += inc) { |
| struct device *dev = pcidev_path_on_root(devfn); |
| if (dev == NULL || !dev->enabled) |
| continue; |
| |
| /* |
| * Found the first enabled device in |
| * a given dev number. |
| */ |
| printk(BIOS_INFO, "PCI func %d was swapped" |
| " to func 0.\n", i); |
| func0->path.pci.devfn = dev->path.pci.devfn; |
| dev->path.pci.devfn = devfn0; |
| break; |
| } |
| } |
| } |
| |
| static void pcie_override_devicetree_after_silicon_init(void) |
| { |
| uint16_t id, id_mask; |
| |
| id = pci_read_config16(PCH_DEV_PCIE1, PCI_DEVICE_ID); |
| /* |
| * We may read an ID other than func 0 after FSP-S. |
| * Strip out 4 least significant bits. |
| */ |
| id_mask = id & ~0xf; |
| printk(BIOS_INFO, "Override DT after FSP-S, PCH is "); |
| if (id_mask == (PCI_DEVICE_ID_INTEL_SPT_LP_PCIE_RP1 & ~0xf)) { |
| printk(BIOS_INFO, "KBL/SKL PCH-LP SKU\n"); |
| pcie_update_device_tree(&pcie_table_skl_pch_lp[0], |
| ARRAY_SIZE(pcie_table_skl_pch_lp)); |
| } else if (id_mask == (PCI_DEVICE_ID_INTEL_KBP_H_PCIE_RP1 & ~0xf)) { |
| printk(BIOS_INFO, "KBL PCH-H SKU\n"); |
| pcie_update_device_tree(&pcie_table_kbl_pch_h[0], |
| ARRAY_SIZE(pcie_table_kbl_pch_h)); |
| } else if (id_mask == (PCI_DEVICE_ID_INTEL_SPT_H_PCIE_RP1 & ~0xf)) { |
| printk(BIOS_INFO, "SKL PCH-H SKU\n"); |
| pcie_update_device_tree(&pcie_table_skl_pch_h[0], |
| ARRAY_SIZE(pcie_table_skl_pch_h)); |
| } else { |
| printk(BIOS_ERR, "[BUG] PCIE Root Port id 0x%x" |
| " is not found\n", id); |
| return; |
| } |
| } |
| |
| void soc_init_pre_device(void *chip_info) |
| { |
| /* Snapshot the current GPIO IRQ polarities. FSP is setting a |
| * default policy that doesn't honor boards' requirements. */ |
| itss_snapshot_irq_polarities(GPIO_IRQ_START, GPIO_IRQ_END); |
| |
| /* Perform silicon specific init. */ |
| fsp_silicon_init(romstage_handoff_is_resume()); |
| |
| /* Restore GPIO IRQ polarities back to previous settings. */ |
| itss_restore_irq_polarities(GPIO_IRQ_START, GPIO_IRQ_END); |
| |
| /* swap enabled PCI ports in device tree if needed */ |
| pcie_override_devicetree_after_silicon_init(); |
| } |
| |
| void soc_fsp_load(void) |
| { |
| fsps_load(romstage_handoff_is_resume()); |
| } |
| |
| static void pci_domain_set_resources(struct device *dev) |
| { |
| assign_resources(dev->link_list); |
| } |
| |
| static struct device_operations pci_domain_ops = { |
| .read_resources = &pci_domain_read_resources, |
| .set_resources = &pci_domain_set_resources, |
| .scan_bus = &pci_domain_scan_bus, |
| #if CONFIG(HAVE_ACPI_TABLES) |
| .write_acpi_tables = &northbridge_write_acpi_tables, |
| .acpi_name = &soc_acpi_name, |
| #endif |
| }; |
| |
| static struct device_operations cpu_bus_ops = { |
| .read_resources = DEVICE_NOOP, |
| .set_resources = DEVICE_NOOP, |
| .enable_resources = DEVICE_NOOP, |
| .init = DEVICE_NOOP, |
| #if CONFIG(HAVE_ACPI_TABLES) |
| .acpi_fill_ssdt_generator = generate_cpu_entries, |
| #endif |
| }; |
| |
| static void soc_enable(struct device *dev) |
| { |
| /* Set the operations if it is a special bus type */ |
| if (dev->path.type == DEVICE_PATH_DOMAIN) |
| dev->ops = &pci_domain_ops; |
| else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER) |
| dev->ops = &cpu_bus_ops; |
| } |
| |
| struct chip_operations soc_intel_skylake_ops = { |
| CHIP_NAME("Intel 6th Gen") |
| .enable_dev = &soc_enable, |
| .init = &soc_init_pre_device, |
| }; |
| |
| /* UPD parameters to be initialized before SiliconInit */ |
| void platform_fsp_silicon_init_params_cb(FSPS_UPD *supd) |
| { |
| FSP_S_CONFIG *params = &supd->FspsConfig; |
| FSP_S_TEST_CONFIG *tconfig = &supd->FspsTestConfig; |
| static struct soc_intel_skylake_config *config; |
| uintptr_t vbt_data = (uintptr_t)vbt_get(); |
| int i; |
| |
| struct device *dev = SA_DEV_ROOT; |
| if (!dev || !dev->chip_info) { |
| printk(BIOS_ERR, "BUG! Could not find SOC devicetree config\n"); |
| return; |
| } |
| config = dev->chip_info; |
| |
| mainboard_silicon_init_params(params); |
| /* Set PsysPmax if it is available from DT */ |
| if (config->psys_pmax) { |
| /* PsysPmax is in unit of 1/8 Watt */ |
| tconfig->PsysPmax = config->psys_pmax * 8; |
| printk(BIOS_DEBUG, "psys_pmax = %d\n", tconfig->PsysPmax); |
| } |
| |
| params->GraphicsConfigPtr = (u32) vbt_data; |
| |
| for (i = 0; i < ARRAY_SIZE(config->usb2_ports); i++) { |
| params->PortUsb20Enable[i] = |
| config->usb2_ports[i].enable; |
| params->Usb2OverCurrentPin[i] = |
| config->usb2_ports[i].ocpin; |
| params->Usb2AfePetxiset[i] = |
| config->usb2_ports[i].pre_emp_bias; |
| params->Usb2AfeTxiset[i] = |
| config->usb2_ports[i].tx_bias; |
| params->Usb2AfePredeemp[i] = |
| config->usb2_ports[i].tx_emp_enable; |
| params->Usb2AfePehalfbit[i] = |
| config->usb2_ports[i].pre_emp_bit; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(config->usb3_ports); i++) { |
| params->PortUsb30Enable[i] = config->usb3_ports[i].enable; |
| params->Usb3OverCurrentPin[i] = config->usb3_ports[i].ocpin; |
| if (config->usb3_ports[i].tx_de_emp) { |
| params->Usb3HsioTxDeEmphEnable[i] = 1; |
| params->Usb3HsioTxDeEmph[i] = |
| config->usb3_ports[i].tx_de_emp; |
| } |
| if (config->usb3_ports[i].tx_downscale_amp) { |
| params->Usb3HsioTxDownscaleAmpEnable[i] = 1; |
| params->Usb3HsioTxDownscaleAmp[i] = |
| config->usb3_ports[i].tx_downscale_amp; |
| } |
| } |
| |
| memcpy(params->SataPortsEnable, config->SataPortsEnable, |
| sizeof(params->SataPortsEnable)); |
| memcpy(params->SataPortsDevSlp, config->SataPortsDevSlp, |
| sizeof(params->SataPortsDevSlp)); |
| memcpy(params->PcieRpClkReqSupport, config->PcieRpClkReqSupport, |
| sizeof(params->PcieRpClkReqSupport)); |
| memcpy(params->PcieRpClkReqNumber, config->PcieRpClkReqNumber, |
| sizeof(params->PcieRpClkReqNumber)); |
| memcpy(params->PcieRpAdvancedErrorReporting, |
| config->PcieRpAdvancedErrorReporting, |
| sizeof(params->PcieRpAdvancedErrorReporting)); |
| memcpy(params->PcieRpLtrEnable, config->PcieRpLtrEnable, |
| sizeof(params->PcieRpLtrEnable)); |
| memcpy(params->PcieRpHotPlug, config->PcieRpHotPlug, |
| sizeof(params->PcieRpHotPlug)); |
| |
| /* |
| * PcieRpClkSrcNumber UPD is set to clock source number(0-6) for |
| * all the enabled PCIe root ports, invalid(0x1F) is set for |
| * disabled PCIe root ports. |
| */ |
| for (i = 0; i < CONFIG_MAX_ROOT_PORTS; i++) { |
| if (config->PcieRpClkReqSupport[i]) |
| params->PcieRpClkSrcNumber[i] = |
| config->PcieRpClkSrcNumber[i]; |
| else |
| params->PcieRpClkSrcNumber[i] = 0x1F; |
| } |
| |
| /* disable Legacy PME */ |
| memset(params->PcieRpPmSci, 0, sizeof(params->PcieRpPmSci)); |
| |
| memcpy(params->SerialIoDevMode, config->SerialIoDevMode, |
| sizeof(params->SerialIoDevMode)); |
| |
| params->PchCio2Enable = config->Cio2Enable; |
| params->SaImguEnable = config->SaImguEnable; |
| params->Heci3Enabled = config->Heci3Enabled; |
| |
| params->LogoPtr = config->LogoPtr; |
| params->LogoSize = config->LogoSize; |
| |
| params->CpuConfig.Bits.VmxEnable = CONFIG(ENABLE_VMX); |
| |
| params->PchPmWoWlanEnable = config->PchPmWoWlanEnable; |
| params->PchPmWoWlanDeepSxEnable = config->PchPmWoWlanDeepSxEnable; |
| params->PchPmLanWakeFromDeepSx = config->WakeConfigPcieWakeFromDeepSx; |
| |
| params->PchLanEnable = config->EnableLan; |
| if (config->EnableLan) { |
| params->PchLanLtrEnable = config->EnableLanLtr; |
| params->PchLanK1OffEnable = config->EnableLanK1Off; |
| params->PchLanClkReqSupported = config->LanClkReqSupported; |
| params->PchLanClkReqNumber = config->LanClkReqNumber; |
| } |
| params->SataSalpSupport = config->SataSalpSupport; |
| params->SsicPortEnable = config->SsicPortEnable; |
| params->ScsEmmcEnabled = config->ScsEmmcEnabled; |
| params->ScsEmmcHs400Enabled = config->ScsEmmcHs400Enabled; |
| params->ScsSdCardEnabled = config->ScsSdCardEnabled; |
| |
| if (!!params->ScsEmmcHs400Enabled && !!config->EmmcHs400DllNeed) { |
| params->PchScsEmmcHs400DllDataValid = |
| !!config->EmmcHs400DllNeed; |
| params->PchScsEmmcHs400RxStrobeDll1 = |
| config->ScsEmmcHs400RxStrobeDll1; |
| params->PchScsEmmcHs400TxDataDll = |
| config->ScsEmmcHs400TxDataDll; |
| } |
| |
| /* If ISH is enabled, enable ISH elements */ |
| dev = pcidev_path_on_root(PCH_DEVFN_ISH); |
| if (dev) |
| params->PchIshEnable = dev->enabled; |
| else |
| params->PchIshEnable = 0; |
| |
| params->PchHdaEnable = config->EnableAzalia; |
| params->PchHdaIoBufferOwnership = config->IoBufferOwnership; |
| params->PchHdaDspEnable = config->DspEnable; |
| params->Device4Enable = config->Device4Enable; |
| params->SataEnable = config->EnableSata; |
| params->SataMode = config->SataMode; |
| params->SataSpeedLimit = config->SataSpeedLimit; |
| params->SataPwrOptEnable = config->SataPwrOptEnable; |
| params->EnableTcoTimer = !config->PmTimerDisabled; |
| |
| tconfig->PchLockDownGlobalSmi = config->LockDownConfigGlobalSmi; |
| tconfig->PchLockDownRtcLock = config->LockDownConfigRtcLock; |
| tconfig->PowerLimit4 = config->PowerLimit4; |
| /* |
| * To disable HECI, the Psf needs to be left unlocked |
| * by FSP till end of post sequence. Based on the devicetree |
| * setting, we set the appropriate PsfUnlock policy in FSP, |
| * do the changes and then lock it back in coreboot during finalize. |
| */ |
| tconfig->PchSbAccessUnlock = (config->HeciEnabled == 0) ? 1 : 0; |
| if (get_lockdown_config() == CHIPSET_LOCKDOWN_COREBOOT) { |
| tconfig->PchLockDownBiosInterface = 0; |
| params->PchLockDownBiosLock = 0; |
| params->PchLockDownSpiEiss = 0; |
| /* |
| * Skip Spi Flash Lockdown from inside FSP. |
| * Making this config "0" means FSP won't set the FLOCKDN bit |
| * of SPIBAR + 0x04 (i.e., Bit 15 of BIOS_HSFSTS_CTL). |
| * So, it becomes coreboot's responsibility to set this bit |
| * before end of POST for security concerns. |
| */ |
| params->SpiFlashCfgLockDown = 0; |
| } |
| /* only replacing preexisting subsys ID defaults when non-zero */ |
| if (CONFIG_SUBSYSTEM_VENDOR_ID != 0) { |
| params->DefaultSvid = CONFIG_SUBSYSTEM_VENDOR_ID; |
| params->PchSubSystemVendorId = CONFIG_SUBSYSTEM_VENDOR_ID; |
| } |
| |
| if (CONFIG_SUBSYSTEM_DEVICE_ID != 0) { |
| params->DefaultSid = CONFIG_SUBSYSTEM_DEVICE_ID; |
| params->PchSubSystemId = CONFIG_SUBSYSTEM_DEVICE_ID; |
| } |
| |
| params->PchPmWolEnableOverride = config->WakeConfigWolEnableOverride; |
| params->PchPmPcieWakeFromDeepSx = config->WakeConfigPcieWakeFromDeepSx; |
| params->PchPmDeepSxPol = config->PmConfigDeepSxPol; |
| params->PchPmSlpS0Enable = config->s0ix_enable; |
| params->PchPmSlpS3MinAssert = config->PmConfigSlpS3MinAssert; |
| params->PchPmSlpS4MinAssert = config->PmConfigSlpS4MinAssert; |
| params->PchPmSlpSusMinAssert = config->PmConfigSlpSusMinAssert; |
| params->PchPmSlpAMinAssert = config->PmConfigSlpAMinAssert; |
| params->PchPmLpcClockRun = config->PmConfigPciClockRun; |
| params->PchPmSlpStrchSusUp = config->PmConfigSlpStrchSusUp; |
| params->PchPmPwrBtnOverridePeriod = |
| config->PmConfigPwrBtnOverridePeriod; |
| params->PchPmPwrCycDur = config->PmConfigPwrCycDur; |
| |
| /* Indicate whether platform supports Voltage Margining */ |
| params->PchPmSlpS0VmEnable = config->PchPmSlpS0VmEnable; |
| |
| params->PchSirqEnable = config->serirq_mode != SERIRQ_OFF; |
| params->PchSirqMode = config->serirq_mode == SERIRQ_CONTINUOUS; |
| |
| params->CpuConfig.Bits.SkipMpInit = !CONFIG_USE_INTEL_FSP_MP_INIT; |
| |
| for (i = 0; i < ARRAY_SIZE(config->i2c_voltage); i++) |
| params->SerialIoI2cVoltage[i] = config->i2c_voltage[i]; |
| |
| for (i = 0; i < ARRAY_SIZE(config->domain_vr_config); i++) |
| fill_vr_domain_config(params, i, &config->domain_vr_config[i]); |
| |
| /* Show SPI controller if enabled in devicetree.cb */ |
| dev = pcidev_path_on_root(PCH_DEVFN_SPI); |
| params->ShowSpiController = dev->enabled; |
| |
| /* Enable xDCI controller if enabled in devicetree and allowed */ |
| dev = pcidev_path_on_root(PCH_DEVFN_USBOTG); |
| if (!xdci_can_enable()) |
| dev->enabled = 0; |
| params->XdciEnable = dev->enabled; |
| |
| /* |
| * Send VR specific mailbox commands: |
| * 000b - no VR specific command sent |
| * 001b - VR mailbox command specifically for the MPS IMPV8 VR |
| * will be sent |
| * 010b - VR specific command sent for PS4 exit issue |
| * 100b - VR specific command sent for MPS VR decay issue |
| */ |
| params->SendVrMbxCmd1 = config->SendVrMbxCmd; |
| |
| /* |
| * Activates VR mailbox command for Intersil VR C-state issues. |
| * 0 - no mailbox command sent. |
| * 1 - VR mailbox command sent for IA/GT rails only. |
| * 2 - VR mailbox command sent for IA/GT/SA rails. |
| */ |
| params->IslVrCmd = config->IslVrCmd; |
| |
| /* Acoustic Noise Mitigation */ |
| params->AcousticNoiseMitigation = config->AcousticNoiseMitigation; |
| params->SlowSlewRateForIa = config->SlowSlewRateForIa; |
| params->SlowSlewRateForGt = config->SlowSlewRateForGt; |
| params->SlowSlewRateForSa = config->SlowSlewRateForSa; |
| params->FastPkgCRampDisableIa = config->FastPkgCRampDisableIa; |
| params->FastPkgCRampDisableGt = config->FastPkgCRampDisableGt; |
| params->FastPkgCRampDisableSa = config->FastPkgCRampDisableSa; |
| |
| /* Enable PMC XRAM read */ |
| tconfig->PchPmPmcReadDisable = config->PchPmPmcReadDisable; |
| |
| /* Enable/Disable EIST */ |
| tconfig->Eist = config->eist_enable; |
| |
| /* Set TccActivationOffset */ |
| tconfig->TccActivationOffset = config->tcc_offset; |
| |
| /* Enable VT-d and X2APIC */ |
| if (!config->ignore_vtd && soc_is_vtd_capable()) { |
| params->VtdBaseAddress[0] = GFXVT_BASE_ADDRESS; |
| params->VtdBaseAddress[1] = VTVC0_BASE_ADDRESS; |
| params->X2ApicOptOut = 0; |
| tconfig->VtdDisable = 0; |
| |
| params->PchIoApicBdfValid = 1; |
| params->PchIoApicBusNumber = 250; |
| params->PchIoApicDeviceNumber = 31; |
| params->PchIoApicFunctionNumber = 0; |
| } |
| |
| soc_irq_settings(params); |
| } |
| |
| /* Mainboard GPIO Configuration */ |
| __weak void mainboard_silicon_init_params(FSP_S_CONFIG *params) |
| { |
| printk(BIOS_DEBUG, "WEAK: %s/%s called\n", __FILE__, __func__); |
| } |