mb/google/hatch/vr/puff: Set up PL2 and PsysPL2
This patch adds correct PL2 baseline setting and PsysPL2 for different
SKUs. There is no way to identify the barral jack power rating, the
assumption is following that ships with the product:
1. i3/i5/i7: 90W BJ
2. Celeron/Pentium: 65W BJ
For Type-C adapter, we don't have Pcritcial (10ms) data, keeps the
original settings as 90% of adapter rating for PsyspL2/PL4 and PL2
as min(PL2, 0.9n) where n is adapter rating power.
BUG=b:143246320
TEST=Run with U62 and Celeron CPU and ensure the PL2 settings are correct
Change-Id: Ib16d4f65707801b430f06892ab45ecfa7551593f
Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42281
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
diff --git a/src/mainboard/google/hatch/variants/duffy/mainboard.c b/src/mainboard/google/hatch/variants/duffy/mainboard.c
index ecc0937..253a7c9 100644
--- a/src/mainboard/google/hatch/variants/duffy/mainboard.c
+++ b/src/mainboard/google/hatch/variants/duffy/mainboard.c
@@ -4,9 +4,12 @@
#include <chip.h>
#include <delay.h>
#include <device/device.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
#include <ec/google/chromeec/ec.h>
#include <gpio.h>
#include <intelblocks/power_limit.h>
+#include <soc/pci_devs.h>
#include <timer.h>
#define GPIO_HDMI_HPD GPP_E13
@@ -35,14 +38,13 @@
* For type-C chargers, set PL2 to 90% of max power to account for
* cable loss and FET Rdson loss in the path from the source.
*/
-#define SET_PSYSPL2(w) (9 * (w) / 10)
-
-#define PUFF_PL2 (35)
-
-#define PUFF_PSYSPL2 (58)
-
-#define PUFF_MAX_TIME_WINDOW 6
-#define PUFF_MIN_DUTYCYCLE 4
+#define SET_PSYSPL2(w) (9 * (w) / 10)
+#define PUFF_U22_PL2 (35)
+#define PUFF_U62_U42_PL2 (51)
+#define PUFF_CELERON_PENTIUM_PSYSPL2 (65)
+#define PUFF_CORE_CPU_PSYSPL2 (90)
+#define PUFF_MAX_TIME_WINDOW 6
+#define PUFF_MIN_DUTYCYCLE 4
/*
* mainboard_set_power_limits
@@ -56,18 +58,15 @@
* +-------------+-----+---------+-----------+-------+
* | sku_id | PL2 | PsysPL2 | PsysPL3 | PL4 |
* +-------------+-----+---------+-----------+-------+
- * | i7 U42 | 51 | 81 | x(.85PL4) | x(82) |
- * | celeron U22 | 35 | 58 | x(.85PL4) | x(51) |
+ * | i7 U42 | 51 | 90 | x(.85PL4) | x(82) |
+ * | i3 U22 | 35 | 65 | x(.85PL4) | x(51) |
* +-------------+-----+---------+-----------+-------+
* For USB C charger:
- * +-------------+-----+---------+---------+-------+
- * | Max Power(W)| PL2 | PsysPL2 | PsysPL3 | PL4 |
- * +-------------+-----+---------+---------+-------+
- * | 60 (U42) | 44 | 54 | 54 | 54 |
- * | 60 (U22) | 29 | 54 | 54 | x(43) |
- * | n (U42) | 44 | .9n | .9n | .9n |
- * | n (U22) | 29 | .9n | .9n | x(43) |
- * +-------------+-----+---------+---------+-------+
+ * +-------------+-----------------+---------+---------+-------+
+ * | Max Power(W)| PL2 | PsysPL2 | PsysPL3 | PL4 |
+ * +-------------+-----+-----------+---------+---------+-------+
+ * | n | min(0.9n, PL2) | 0.9n | 0.9n | 0.9n |
+ * +-------------+-----+-----------+---------+---------+-------+
*/
/*
@@ -84,17 +83,23 @@
* For Type-C 20V, the Psys_pmax should be 20v x 9.6A = 192W
* For a barral jack, the Psys_pmax should be 19v x 9.6A = 182.4W
*/
-#define PSYS_IMAX 9600
-#define BJ_VOLTS_MV 19000
+#define PSYS_IMAX 9600
+#define BJ_VOLTS_MV 19000
static void mainboard_set_power_limits(struct soc_power_limits_config *conf)
{
enum usb_chg_type type;
u32 watts;
u16 volts_mv, current_ma;
- u32 psyspl2 = PUFF_PSYSPL2; // default barrel jack value for U22
+ u32 psyspl2 = PUFF_CELERON_PENTIUM_PSYSPL2; // default BJ value
+ u32 pl2 = PUFF_U22_PL2; // default PL2 for U22
int rv = google_chromeec_get_usb_pd_power_info(&type, ¤t_ma, &volts_mv);
+ struct device *dev = pcidev_path_on_root(SA_DEVFN_ROOT);
+ u16 mch_id = dev ? pci_read_config16(dev, PCI_DEVICE_ID) : 0xffff;
+ dev = pcidev_path_on_root(SA_DEVFN_IGD);
+ u16 igd_id = dev ? pci_read_config16(dev, PCI_DEVICE_ID) : 0xffff;
+
/* use SoC default value for PsysPL3 and PL4 unless we're on USB-PD*/
conf->tdp_psyspl3 = 0;
conf->tdp_pl4 = 0;
@@ -102,23 +107,44 @@
if (rv == 0 && type == USB_CHG_TYPE_PD) {
/* Detected USB-PD. Base on max value of adapter */
watts = ((u32)current_ma * volts_mv) / 1000000;
- psyspl2 = watts;
- conf->tdp_psyspl3 = SET_PSYSPL2(psyspl2);
+ /* set psyspl2 to 90% of adapter rating */
+ psyspl2 = SET_PSYSPL2(watts);
+
+ /* Limit PL2 if the adapter is with lower capability */
+ if (mch_id == PCI_DEVICE_ID_INTEL_CML_ULT ||
+ mch_id == PCI_DEVICE_ID_INTEL_CML_ULT_6_2)
+ pl2 = (psyspl2 > PUFF_U62_U42_PL2) ? PUFF_U62_U42_PL2 : psyspl2;
+ else
+ pl2 = (psyspl2 > PUFF_U22_PL2) ? PUFF_U22_PL2 : psyspl2;
+
+ conf->tdp_psyspl3 = psyspl2;
/* set max possible time window */
conf->tdp_psyspl3_time = PUFF_MAX_TIME_WINDOW;
/* set minimum duty cycle */
conf->tdp_psyspl3_dutycycle = PUFF_MIN_DUTYCYCLE;
- conf->tdp_pl4 = SET_PSYSPL2(psyspl2);
+ /* No data about an arbitrary Type-C adapter, set pl4 conservatively. */
+ conf->tdp_pl4 = psyspl2;
} else {
- /* Input type is barrel jack */
+ /*
+ * Input type is barrel jack, from the SKU matrix:
+ * 1. i3/i5/i7 SKUs use 90W BJ
+ * 2. Celeron and Pentium use 65W BJ (default)
+ */
volts_mv = BJ_VOLTS_MV;
+ /* Use IGD ID to check if CPU is Core SKUs */
+ if (igd_id != PCI_DEVICE_ID_INTEL_CML_GT1_ULT_1 &&
+ igd_id != PCI_DEVICE_ID_INTEL_CML_GT2_ULT_5) {
+ psyspl2 = PUFF_CORE_CPU_PSYSPL2;
+ if (mch_id == PCI_DEVICE_ID_INTEL_CML_ULT ||
+ mch_id == PCI_DEVICE_ID_INTEL_CML_ULT_6_2)
+ pl2 = PUFF_U62_U42_PL2;
+ }
}
/* voltage unit is milliVolts and current is in milliAmps */
conf->psys_pmax = (u16)(((u32)PSYS_IMAX * volts_mv) / 1000000);
- conf->tdp_pl2_override = PUFF_PL2;
- /* set psyspl2 to 90% of max adapter power */
- conf->tdp_psyspl2 = SET_PSYSPL2(psyspl2);
+ conf->tdp_pl2_override = pl2;
+ conf->tdp_psyspl2 = psyspl2;
}
void variant_ramstage_init(void)
diff --git a/src/mainboard/google/hatch/variants/kaisa/mainboard.c b/src/mainboard/google/hatch/variants/kaisa/mainboard.c
index ecc0937..253a7c9 100644
--- a/src/mainboard/google/hatch/variants/kaisa/mainboard.c
+++ b/src/mainboard/google/hatch/variants/kaisa/mainboard.c
@@ -4,9 +4,12 @@
#include <chip.h>
#include <delay.h>
#include <device/device.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
#include <ec/google/chromeec/ec.h>
#include <gpio.h>
#include <intelblocks/power_limit.h>
+#include <soc/pci_devs.h>
#include <timer.h>
#define GPIO_HDMI_HPD GPP_E13
@@ -35,14 +38,13 @@
* For type-C chargers, set PL2 to 90% of max power to account for
* cable loss and FET Rdson loss in the path from the source.
*/
-#define SET_PSYSPL2(w) (9 * (w) / 10)
-
-#define PUFF_PL2 (35)
-
-#define PUFF_PSYSPL2 (58)
-
-#define PUFF_MAX_TIME_WINDOW 6
-#define PUFF_MIN_DUTYCYCLE 4
+#define SET_PSYSPL2(w) (9 * (w) / 10)
+#define PUFF_U22_PL2 (35)
+#define PUFF_U62_U42_PL2 (51)
+#define PUFF_CELERON_PENTIUM_PSYSPL2 (65)
+#define PUFF_CORE_CPU_PSYSPL2 (90)
+#define PUFF_MAX_TIME_WINDOW 6
+#define PUFF_MIN_DUTYCYCLE 4
/*
* mainboard_set_power_limits
@@ -56,18 +58,15 @@
* +-------------+-----+---------+-----------+-------+
* | sku_id | PL2 | PsysPL2 | PsysPL3 | PL4 |
* +-------------+-----+---------+-----------+-------+
- * | i7 U42 | 51 | 81 | x(.85PL4) | x(82) |
- * | celeron U22 | 35 | 58 | x(.85PL4) | x(51) |
+ * | i7 U42 | 51 | 90 | x(.85PL4) | x(82) |
+ * | i3 U22 | 35 | 65 | x(.85PL4) | x(51) |
* +-------------+-----+---------+-----------+-------+
* For USB C charger:
- * +-------------+-----+---------+---------+-------+
- * | Max Power(W)| PL2 | PsysPL2 | PsysPL3 | PL4 |
- * +-------------+-----+---------+---------+-------+
- * | 60 (U42) | 44 | 54 | 54 | 54 |
- * | 60 (U22) | 29 | 54 | 54 | x(43) |
- * | n (U42) | 44 | .9n | .9n | .9n |
- * | n (U22) | 29 | .9n | .9n | x(43) |
- * +-------------+-----+---------+---------+-------+
+ * +-------------+-----------------+---------+---------+-------+
+ * | Max Power(W)| PL2 | PsysPL2 | PsysPL3 | PL4 |
+ * +-------------+-----+-----------+---------+---------+-------+
+ * | n | min(0.9n, PL2) | 0.9n | 0.9n | 0.9n |
+ * +-------------+-----+-----------+---------+---------+-------+
*/
/*
@@ -84,17 +83,23 @@
* For Type-C 20V, the Psys_pmax should be 20v x 9.6A = 192W
* For a barral jack, the Psys_pmax should be 19v x 9.6A = 182.4W
*/
-#define PSYS_IMAX 9600
-#define BJ_VOLTS_MV 19000
+#define PSYS_IMAX 9600
+#define BJ_VOLTS_MV 19000
static void mainboard_set_power_limits(struct soc_power_limits_config *conf)
{
enum usb_chg_type type;
u32 watts;
u16 volts_mv, current_ma;
- u32 psyspl2 = PUFF_PSYSPL2; // default barrel jack value for U22
+ u32 psyspl2 = PUFF_CELERON_PENTIUM_PSYSPL2; // default BJ value
+ u32 pl2 = PUFF_U22_PL2; // default PL2 for U22
int rv = google_chromeec_get_usb_pd_power_info(&type, ¤t_ma, &volts_mv);
+ struct device *dev = pcidev_path_on_root(SA_DEVFN_ROOT);
+ u16 mch_id = dev ? pci_read_config16(dev, PCI_DEVICE_ID) : 0xffff;
+ dev = pcidev_path_on_root(SA_DEVFN_IGD);
+ u16 igd_id = dev ? pci_read_config16(dev, PCI_DEVICE_ID) : 0xffff;
+
/* use SoC default value for PsysPL3 and PL4 unless we're on USB-PD*/
conf->tdp_psyspl3 = 0;
conf->tdp_pl4 = 0;
@@ -102,23 +107,44 @@
if (rv == 0 && type == USB_CHG_TYPE_PD) {
/* Detected USB-PD. Base on max value of adapter */
watts = ((u32)current_ma * volts_mv) / 1000000;
- psyspl2 = watts;
- conf->tdp_psyspl3 = SET_PSYSPL2(psyspl2);
+ /* set psyspl2 to 90% of adapter rating */
+ psyspl2 = SET_PSYSPL2(watts);
+
+ /* Limit PL2 if the adapter is with lower capability */
+ if (mch_id == PCI_DEVICE_ID_INTEL_CML_ULT ||
+ mch_id == PCI_DEVICE_ID_INTEL_CML_ULT_6_2)
+ pl2 = (psyspl2 > PUFF_U62_U42_PL2) ? PUFF_U62_U42_PL2 : psyspl2;
+ else
+ pl2 = (psyspl2 > PUFF_U22_PL2) ? PUFF_U22_PL2 : psyspl2;
+
+ conf->tdp_psyspl3 = psyspl2;
/* set max possible time window */
conf->tdp_psyspl3_time = PUFF_MAX_TIME_WINDOW;
/* set minimum duty cycle */
conf->tdp_psyspl3_dutycycle = PUFF_MIN_DUTYCYCLE;
- conf->tdp_pl4 = SET_PSYSPL2(psyspl2);
+ /* No data about an arbitrary Type-C adapter, set pl4 conservatively. */
+ conf->tdp_pl4 = psyspl2;
} else {
- /* Input type is barrel jack */
+ /*
+ * Input type is barrel jack, from the SKU matrix:
+ * 1. i3/i5/i7 SKUs use 90W BJ
+ * 2. Celeron and Pentium use 65W BJ (default)
+ */
volts_mv = BJ_VOLTS_MV;
+ /* Use IGD ID to check if CPU is Core SKUs */
+ if (igd_id != PCI_DEVICE_ID_INTEL_CML_GT1_ULT_1 &&
+ igd_id != PCI_DEVICE_ID_INTEL_CML_GT2_ULT_5) {
+ psyspl2 = PUFF_CORE_CPU_PSYSPL2;
+ if (mch_id == PCI_DEVICE_ID_INTEL_CML_ULT ||
+ mch_id == PCI_DEVICE_ID_INTEL_CML_ULT_6_2)
+ pl2 = PUFF_U62_U42_PL2;
+ }
}
/* voltage unit is milliVolts and current is in milliAmps */
conf->psys_pmax = (u16)(((u32)PSYS_IMAX * volts_mv) / 1000000);
- conf->tdp_pl2_override = PUFF_PL2;
- /* set psyspl2 to 90% of max adapter power */
- conf->tdp_psyspl2 = SET_PSYSPL2(psyspl2);
+ conf->tdp_pl2_override = pl2;
+ conf->tdp_psyspl2 = psyspl2;
}
void variant_ramstage_init(void)