| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| /* |
| * Include this file into a mainboard's DSDT _SB device tree and it will |
| * expose the NCT6687D SuperIO and some of its functionality. |
| * |
| * It allows the change of IO ports, IRQs and DMA settings on logical |
| * devices, disabling and reenabling logical devices. |
| * |
| * LDN State |
| * 0x1 PP Implemented, untested |
| * 0x2 SP1 Implemented, untested |
| * 0x3 SP1 Implemented, untested |
| * 0x5 KBC Implemented, untested |
| * 0x8 GPIO Implemented, untested |
| * 0xb EC Implemented, untested |
| * |
| * Controllable through preprocessor defines: |
| * SUPERIO_DEV Device identifier for this SIO (e.g. SIO0) |
| * SUPERIO_PNP_BASE I/O address of the first PnP configuration register |
| * NCT6687D_SHOW_PP If defined, the parallel port will be exposed. |
| * NCT6687D_SHOW_SP1 If defined, Serial Port 1 will be exposed. |
| * NCT6687D_SHOW_SP2 If defined, Serial Port 2 will be exposed. |
| * NCT6687D_SHOW_KBC If defined, the Keyboard Controller will be exposed. |
| * NCT6687D_SHOW_GPIO If defined, GPIO support will be exposed. |
| * NCT6687D_SHOW_EC If defined, the Environment Controller will be exposed. |
| */ |
| |
| #undef SUPERIO_CHIP_NAME |
| #define SUPERIO_CHIP_NAME NCT6687D |
| #include <superio/acpi/pnp.asl> |
| |
| #undef PNP_DEFAULT_PSC |
| #define PNP_DEFAULT_PSC Return (0) /* no power management */ |
| |
| Device(SUPERIO_DEV) { |
| Name (_HID, EisaId("PNP0A05")) |
| Name (_STR, Unicode("Nuvoton NCT6687D Super I/O")) |
| Name (_UID, SUPERIO_UID(SUPERIO_DEV,)) |
| |
| /* SuperIO configuration ports */ |
| OperationRegion (CREG, SystemIO, SUPERIO_PNP_BASE, 0x02) |
| Field (CREG, ByteAcc, NoLock, Preserve) |
| { |
| PNP_ADDR_REG, 8, |
| PNP_DATA_REG, 8, |
| } |
| IndexField (PNP_ADDR_REG, PNP_DATA_REG, ByteAcc, NoLock, Preserve) |
| { |
| Offset (0x07), |
| PNP_LOGICAL_DEVICE, 8, /* Logical device selector */ |
| |
| Offset (0x30), |
| PNP_DEVICE_ACTIVE, 1, /* Logical device activation */ |
| ACT1, 1, /* Logical device activation */ |
| ACT2, 1, /* Logical device activation */ |
| ACT3, 1, /* Logical device activation */ |
| ACT4, 1, /* Logical device activation */ |
| ACT5, 1, /* Logical device activation */ |
| ACT6, 1, /* Logical device activation */ |
| ACT7, 1, /* Logical device activation */ |
| |
| Offset (0x60), |
| PNP_IO0_HIGH_BYTE, 8, /* First I/O port base - high byte */ |
| PNP_IO0_LOW_BYTE, 8, /* First I/O port base - low byte */ |
| Offset (0x62), |
| PNP_IO1_HIGH_BYTE, 8, /* Second I/O port base - high byte */ |
| PNP_IO1_LOW_BYTE, 8, /* Second I/O port base - low byte */ |
| Offset (0x64), |
| PNP_IO2_HIGH_BYTE, 8, /* Third I/O port base - high byte */ |
| PNP_IO2_LOW_BYTE, 8, /* Third I/O port base - low byte */ |
| |
| Offset (0x70), |
| PNP_IRQ0, 8, /* First IRQ */ |
| Offset (0x72), |
| PNP_IRQ1, 8, /* Second IRQ */ |
| Offset (0x74), |
| PNP_DMA0, 8, /* DRQ */ |
| } |
| |
| Method (_CRS) |
| { |
| /* Announce the used I/O ports to the OS */ |
| Return (ResourceTemplate () { |
| IO (Decode16, SUPERIO_PNP_BASE, SUPERIO_PNP_BASE, 0x01, 0x02) |
| }) |
| } |
| |
| #undef PNP_ENTER_MAGIC_1ST |
| #undef PNP_ENTER_MAGIC_2ND |
| #undef PNP_ENTER_MAGIC_3RD |
| #undef PNP_ENTER_MAGIC_4TH |
| #undef PNP_EXIT_MAGIC_1ST |
| #undef PNP_EXIT_SPECIAL_REG |
| #undef PNP_EXIT_SPECIAL_VAL |
| #define PNP_ENTER_MAGIC_1ST 0x87 |
| #define PNP_ENTER_MAGIC_2ND 0x87 |
| #define PNP_EXIT_MAGIC_1ST 0xaa |
| #include <superio/acpi/pnp_config.asl> |
| |
| #ifdef NCT6687D_SHOW_PP |
| #undef SUPERIO_PNP_HID |
| #undef SUPERIO_PNP_LDN |
| #undef SUPERIO_PNP_DDN |
| #undef SUPERIO_PNP_NO_DIS |
| #undef SUPERIO_PNP_PM_REG |
| #undef SUPERIO_PNP_PM_VAL |
| #undef SUPERIO_PNP_PM_LDN |
| #undef SUPERIO_PNP_IO0 |
| #undef SUPERIO_PNP_IO1 |
| #undef SUPERIO_PNP_IO2 |
| #undef SUPERIO_PNP_IRQ0 |
| #undef SUPERIO_PNP_IRQ1 |
| #undef SUPERIO_PNP_DMA |
| /* |
| * The extra code required to dynamically reflect ECP in the HID |
| * isn't currently justified, so the HID is hardcoded as not |
| * using ECP. "PNP0401" would indicate ECP. |
| */ |
| #define SUPERIO_PNP_HID "PNP0400" |
| #define SUPERIO_PNP_LDN 1 |
| #define SUPERIO_PNP_IO0 0x08, 0x08 |
| #define SUPERIO_PNP_IRQ0 |
| #define SUPERIO_PNP_DMA |
| #include <superio/acpi/pnp_generic.asl> |
| #endif |
| |
| #ifdef NCT6687D_SHOW_SP1 |
| #undef SUPERIO_UART_LDN |
| #undef SUPERIO_UART_DDN |
| #undef SUPERIO_UART_PM_REG |
| #undef SUPERIO_UART_PM_VAL |
| #undef SUPERIO_UART_PM_LDN |
| #define SUPERIO_UART_LDN 2 |
| #include <superio/acpi/pnp_uart.asl> |
| #endif |
| |
| #ifdef NCT6687D_SHOW_SP2 |
| #undef SUPERIO_UART_LDN |
| #undef SUPERIO_UART_DDN |
| #undef SUPERIO_UART_PM_REG |
| #undef SUPERIO_UART_PM_VAL |
| #undef SUPERIO_UART_PM_LDN |
| #define SUPERIO_UART_LDN 3 |
| #include <superio/acpi/pnp_uart.asl> |
| #endif |
| |
| #ifdef NCT6687D_SHOW_KBC |
| #undef SUPERIO_KBC_LDN |
| #undef SUPERIO_KBC_PS2M |
| #undef SUPERIO_KBC_PS2LDN |
| #define SUPERIO_KBC_LDN 5 |
| #define SUPERIO_KBC_PS2M |
| #include <superio/acpi/pnp_kbc.asl> |
| #endif |
| |
| #ifdef NCT6687D_SHOW_EC |
| #undef SUPERIO_PNP_HID |
| #undef SUPERIO_PNP_LDN |
| #undef SUPERIO_PNP_DDN |
| #undef SUPERIO_PNP_NO_DIS |
| #undef SUPERIO_PNP_PM_REG |
| #undef SUPERIO_PNP_PM_VAL |
| #undef SUPERIO_PNP_PM_LDN |
| #undef SUPERIO_PNP_IO0 |
| #undef SUPERIO_PNP_IO1 |
| #undef SUPERIO_PNP_IO2 |
| #undef SUPERIO_PNP_IRQ0 |
| #undef SUPERIO_PNP_IRQ1 |
| #undef SUPERIO_PNP_DMA |
| #define SUPERIO_PNP_LDN 11 |
| #define SUPERIO_PNP_IO0 0x08, 0x08 |
| #define SUPERIO_PNP_IRQ0 |
| #include <superio/acpi/pnp_generic.asl> |
| #endif |
| |
| } |