| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering |
| * Copyright (C) 2010 Advanced Micro Devices, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc. |
| */ |
| |
| #include <stdint.h> |
| #include <arch/cpu.h> |
| #include <arch/io.h> |
| #include <console/console.h> |
| #include <cpu/x86/msr.h> |
| #include "sr5650.h" |
| #include "cmn.h" |
| |
| /* space = 0: AX_INDXC, AX_DATAC |
| * space = 1: AX_INDXP, AX_DATAP |
| */ |
| static void alink_ax_indx(u32 space, u32 axindc, u32 mask, u32 val) |
| { |
| u32 tmp; |
| |
| /* read axindc to tmp */ |
| outl(space << 30 | space << 3 | 0x30, AB_INDX); |
| outl(axindc, AB_DATA); |
| outl(space << 30 | space << 3 | 0x34, AB_INDX); |
| tmp = inl(AB_DATA); |
| |
| tmp &= ~mask; |
| tmp |= val; |
| |
| /* write tmp */ |
| outl(space << 30 | space << 3 | 0x30, AB_INDX); |
| outl(axindc, AB_DATA); |
| outl(space << 30 | space << 3 | 0x34, AB_INDX); |
| outl(tmp, AB_DATA); |
| } |
| |
| |
| /* family 10 only, for reg > 0xFF */ |
| #if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 || CONFIG_NORTHBRIDGE_AMD_AGESA_FAMILY10 |
| static void set_fam10_ext_cfg_enable_bits(device_t fam10_dev, u32 reg_pos, u32 mask, |
| u32 val) |
| { |
| u32 reg_old, reg; |
| reg = reg_old = pci_read_config32(fam10_dev, reg_pos); |
| reg &= ~mask; |
| reg |= val; |
| if (reg != reg_old) { |
| pci_write_config32(fam10_dev, reg_pos, reg); |
| } |
| } |
| #else |
| #define set_fam10_ext_cfg_enable_bits(a, b, c, d) do {} while (0) |
| #endif |
| |
| |
| /* |
| * Compliant with CIM_33's ATINB_PrepareInit |
| */ |
| static void get_cpu_rev(void) |
| { |
| u32 eax; |
| |
| eax = cpuid_eax(1); |
| printk(BIOS_INFO, "get_cpu_rev EAX=0x%x.\n", eax); |
| if (eax <= 0xfff) |
| printk(BIOS_INFO, "CPU Rev is K8_Cx.\n"); |
| else if (eax <= 0x10fff) |
| printk(BIOS_INFO, "CPU Rev is K8_Dx.\n"); |
| else if (eax <= 0x20fff) |
| printk(BIOS_INFO, "CPU Rev is K8_Ex.\n"); |
| else if (eax <= 0x40fff) |
| printk(BIOS_INFO, "CPU Rev is K8_Fx.\n"); |
| else if (eax == 0x60fb1 || eax == 0x60f81) /*These two IDS are exception, they are G1. */ |
| printk(BIOS_INFO, "CPU Rev is K8_G1.\n"); |
| else if (eax <= 0X60FF0) |
| printk(BIOS_INFO, "CPU Rev is K8_G0.\n"); |
| else if (eax <= 0x100000) |
| printk(BIOS_INFO, "CPU Rev is K8_G1.\n"); |
| else if (eax <= 0x100fa0) |
| printk(BIOS_INFO, "CPU Rev is Fam 10.\n"); |
| else |
| printk(BIOS_INFO, "CPU Rev is not recognized.\n"); |
| } |
| |
| /* |
| CIM NB_GetRevisionInfo() |
| */ |
| static u8 get_nb_rev(device_t nb_dev) |
| { |
| u8 reg; |
| reg = pci_read_config8(nb_dev, 0x8); /* copy from CIM, can't find in doc */ |
| switch(reg & 3) |
| { |
| case 0x00: |
| reg = REV_SR5650_A11; |
| break; |
| case 0x02: |
| default: |
| reg = REV_SR5650_A12; |
| break; |
| } |
| return reg; |
| } |
| |
| /***************************************** |
| * Compliant with SR5650_CIMX_4_5_0 NBHT_InitHT(). |
| * Init HT link speed/width for sr5650 -- k8 link |
| 1: Check CPU Family, Family10? |
| 2: Get CPU's HT speed and width |
| 3: Decide HT mode 1 or 3 by HT Speed. >1GHz: HT3, else HT1 |
| 4: |
| *****************************************/ |
| static const u8 sr5650_ibias[] = { |
| /* 1, 3 are reserved. */ |
| [0x0] = 0x44, /* 200MHz HyperTransport 1 only */ |
| [0x2] = 0x44, /* 400MHz HyperTransport 1 only */ |
| [0x4] = 0xB6, /* 600MHz HyperTransport 1 only */ |
| [0x5] = 0x44, /* 800MHz HyperTransport 1 only */ |
| [0x6] = 0x96, /* 1GHz HyperTransport 1 only */ |
| /* HT3 for Family 10 */ |
| [0x7] = 0xB6, /* 1.2GHz HyperTransport 3 only */ |
| [0x8] = 0x23, /* 1.4GHz HyperTransport 3 only */ |
| [0x9] = 0x44, /* 1.6GHz HyperTransport 3 only */ |
| [0xa] = 0x64, /* 1.8GHz HyperTransport 3 only */ |
| [0xb] = 0x96, /* 2.0GHz HyperTransport 3 only */ |
| [0xc] = 0xA6, /* 2.2GHz HyperTransport 3 only */ |
| [0xd] = 0xB6, /* 2.4GHz HyperTransport 3 only */ |
| [0xe] = 0xC6, /* 2.6GHz HyperTransport 3 only */ |
| }; |
| |
| void sr5650_htinit(void) |
| { |
| /* |
| * About HT, it has been done in enumerate_ht_chain(). |
| */ |
| device_t cpu_f0, sr5650_f0, clk_f1; |
| u32 reg; |
| u8 cpu_ht_freq, cpu_htfreq_max, ibias; |
| u8 sbnode; |
| u8 sblink; |
| u16 linkfreq_reg; |
| u16 linkfreqext_reg; |
| |
| /************************ |
| * get cpu's ht freq, in cpu's function 0, offset 0x88 |
| * bit11-8, specifics the maximum operation frequency of the link's transmitter clock. |
| * The link frequency field (Frq) is cleared by cold reset. SW can write a nonzero |
| * value to this reg, and that value takes effect on the next warm reset or |
| * LDTSTOP_L disconnect sequence. |
| * please see the table sr5650_ibias about the value and its corresponding frequency. |
| ************************/ |
| /* Link0, Link1 are for connection between P0 and P1. |
| * TODO: Check the topology of the MP and NB. Or we just read the nbconfig? */ |
| /* NOTE: In most cases, we only have one CPU. In that case, we should read 0x88. */ |
| |
| /* Find out the node ID and the Link ID that |
| * connects to the Southbridge (system IO hub). |
| */ |
| sbnode = (pci_read_config32(PCI_DEV(0, 0x18, 0), 0x60) >> 8) & 7; |
| sblink = (pci_read_config32(PCI_DEV(0, 0x18, 0), 0x64) >> 8) & 3; /* bit[10] sublink, bit[9,8] link. */ |
| cpu_f0 = PCI_DEV(0, (0x18 + sbnode), 0); |
| |
| /* |
| * link freq reg of Link0, 1, 2, 3 is 0x88, 0xA8, 0xC8, 0xE8 respectively |
| * link freq ext reg of Link0, 1, 2, 3 is 0x9C, 0xBC, 0xDC, 0xFC respectively |
| */ |
| linkfreq_reg = 0x88 + (sblink << 5); |
| linkfreqext_reg = 0x9C + (sblink << 5); |
| reg = pci_read_config32(cpu_f0, linkfreq_reg); |
| |
| cpu_ht_freq = (reg & 0xf00) >> 8; |
| |
| /* Freq[4] is only valid for revision D and later processors */ |
| if (cpuid_eax(1) >= 0x100F80) { |
| cpu_htfreq_max = 0x14; |
| cpu_ht_freq |= ((pci_read_config32(cpu_f0, linkfreqext_reg) & 0x01) << 4); |
| } else { |
| cpu_htfreq_max = 0x0F; |
| } |
| |
| printk(BIOS_INFO, "sr5650_htinit: Node %x Link %x, HT freq=%x.\n", |
| sbnode, sblink, cpu_ht_freq); |
| sr5650_f0 = PCI_DEV(0, 0, 0); |
| |
| clk_f1 = PCI_DEV(0, 0, 1); /* We need to make sure the F1 is accessible. */ |
| |
| ibias = sr5650_ibias[cpu_ht_freq]; |
| |
| /* If HT freq>1GHz, we assume the CPU is fam10, else it is K8. |
| * Is it appropriate? |
| * Frequency is 1GHz, i.e. cpu_ht_freq is 6, in most cases. |
| * So we check 6 only, it would be faster. */ |
| if ((cpu_ht_freq == 0x6) || (cpu_ht_freq == 0x5) || (cpu_ht_freq == 0x4) || |
| (cpu_ht_freq == 0x2) || (cpu_ht_freq == 0x0)) { |
| printk(BIOS_INFO, "sr5650_htinit: HT1 mode\n"); |
| |
| /* HT1 mode, RPR 5.4.2 */ |
| /* set IBIAS code */ |
| set_nbcfg_enable_bits(clk_f1, 0xD8, 0x3FF, ibias); |
| /* Optimizes chipset HT transmitter drive strength */ |
| set_htiu_enable_bits(sr5650_f0, 0x2A, 0x3, 0x3); |
| } else if ((cpu_ht_freq > 0x6) && (cpu_ht_freq < cpu_htfreq_max)) { |
| printk(BIOS_INFO, "sr5650_htinit: HT3 mode\n"); |
| |
| /* Enable Protocol checker */ |
| set_htiu_enable_bits(sr5650_f0, 0x1E, 0xFFFFFFFF, 0x7FFFFFFC); |
| |
| #if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 || CONFIG_NORTHBRIDGE_AMD_AGESA_FAMILY10 /* save some spaces */ |
| /* HT3 mode, RPR 5.4.3 */ |
| set_nbcfg_enable_bits(sr5650_f0, 0x9c, 0x3 << 16, 0); |
| |
| /* set IBIAS code */ |
| set_nbcfg_enable_bits(clk_f1, 0xD8, 0x3FF, ibias); |
| /* Optimizes chipset HT transmitter drive strength */ |
| set_htiu_enable_bits(sr5650_f0, 0x2A, 0x3, 0x1); |
| /* Enables error-retry mode */ |
| set_nbcfg_enable_bits(sr5650_f0, 0x44, 0x1, 0x1); |
| /* Enables scrambling and Disables command throttling */ |
| set_nbcfg_enable_bits(sr5650_f0, 0xac, (1 << 3) | (1 << 14), (1 << 3) | (1 << 14)); |
| /* Enables transmitter de-emphasis */ |
| set_nbcfg_enable_bits(sr5650_f0, 0xa4, 1 << 31, 1 << 31); |
| /* Enables transmitter de-emphasis level */ |
| /* Sets training 0 time */ |
| set_nbcfg_enable_bits(sr5650_f0, 0xa0, 0x3F, 0x14); |
| |
| /* Enables strict TM4 detection */ |
| set_htiu_enable_bits(sr5650_f0, 0x15, 0x1 << 22, 0x1 << 22); |
| |
| /* Optimizes chipset HT transmitter drive strength */ |
| set_htiu_enable_bits(sr5650_f0, 0x2A, 0x3 << 0, 0x1 << 0); |
| |
| /* HyperTransport 3 Processor register settings to be done in northbridge */ |
| |
| /* Enables error-retry mode */ |
| set_fam10_ext_cfg_enable_bits(cpu_f0, 0x130 + (sblink << 2), 1 << 0, 1 << 0); |
| |
| /* Enables scrambling */ |
| set_fam10_ext_cfg_enable_bits(cpu_f0, 0x170 + (sblink << 2), 1 << 3, 1 << 3); |
| |
| /* Enables transmitter de-emphasis |
| * This depends on the PCB design and the trace |
| */ |
| /* Disables command throttling */ |
| set_fam10_ext_cfg_enable_bits(cpu_f0, 0x168, 1 << 10, 1 << 10); |
| |
| /* Sets Training 0 Time. See T0Time table for encodings */ |
| /* AGESA have set it to recommended value already |
| * The recommended values are 14h(2us) if F0x[18C:170][LS2En]=0 |
| * and 26h(12us) if F0x[18C:170][LS2En]=1 |
| */ |
| //set_fam10_ext_cfg_enable_bits(cpu_f0, 0x16C, 0x3F, 0x26); |
| |
| /* HT Buffer Allocation for Ganged Links!!! */ |
| #endif /* CONFIG_NORTHBRIDGE_AMD_AMDFAM10 || CONFIG_NORTHBRIDGE_AMD_AGESA_FAMILY10 */ |
| } |
| } |
| |
| #if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 || CONFIG_NORTHBRIDGE_AMD_AGESA_FAMILY10 /* save some spaces */ |
| void fam10_optimization(void) |
| { |
| device_t cpu_f0, cpu_f2, cpu_f3; |
| device_t cpu1_f0, cpu1_f2, cpu1_f3; |
| msr_t msr; |
| u32 val; |
| |
| printk(BIOS_INFO, "fam10_optimization()\n"); |
| msr = rdmsr(0xC001001F); |
| msr.hi |= 1 << 14; /* bit 46: EnableCf8ExtCfg */ |
| wrmsr(0xC001001F, msr); |
| |
| cpu_f0 = PCI_DEV(0, 0x18, 0); |
| cpu_f2 = PCI_DEV(0, 0x18, 2); |
| cpu_f3 = PCI_DEV(0, 0x18, 3); |
| cpu1_f0 = PCI_DEV(0, 0x19, 0); |
| cpu1_f2 = PCI_DEV(0, 0x19, 2); |
| cpu1_f3 = PCI_DEV(0, 0x19, 3); |
| |
| val = pci_read_config32(cpu1_f3, 0x8C); |
| val |= 1 << 14; |
| pci_write_config32(cpu1_f3, 0x8C, val); |
| |
| /* TODO: HT Buffer Allocation for (un)Ganged Links */ |
| /* rpr Table 5-11, 5-12 */ |
| } |
| #else |
| #define fam10_optimization() do{}while(0) |
| #endif /* CONFIG_NORTHBRIDGE_AMD_AMDFAM10 || CONFIG_NORTHBRIDGE_AMD_AGESA_FAMILY10 */ |
| |
| /***************************************** |
| * Compliant with CIM_33's ATINB_PCICFG_POR_TABLE |
| *****************************************/ |
| static void sr5650_por_pcicfg_init(device_t nb_dev) |
| { |
| /* enable PCI Memory Access */ |
| set_nbcfg_enable_bits_8(nb_dev, 0x04, (u8)(~0xFD), 0x02); |
| |
| set_nbcfg_enable_bits(nb_dev, 0x14, ~0, 0x0); |
| set_nbcfg_enable_bits(nb_dev, 0x18, ~0, 0x0); |
| set_nbcfg_enable_bits(nb_dev, 0x20, ~0, 0x0); |
| set_nbcfg_enable_bits(nb_dev, 0x84, ~0, 0x03000010); |
| |
| /* Reg4Ch[1]=1 (APIC_ENABLE) force cpu request with address 0xFECx_xxxx to south-bridge |
| * Reg4Ch[6]=1 (BMMsgEn) enable BM_Set message generation |
| * BMMsgEn */ |
| set_nbcfg_enable_bits(nb_dev, 0x4C, (u8)(~0x00), 0x52042); |
| |
| set_nbcfg_enable_bits(nb_dev, 0x7C, (u8)(~0), 0x0); |
| |
| /* Reg8Ch[10:9] = 0x3 Enables Gfx Debug BAR, |
| * force this BAR as mem type in sr5650_gfx.c */ |
| //set_nbcfg_enable_bits_8(nb_dev, 0x8D, (u8)(~0xFF), 0x03); |
| } |
| |
| /***************************************** |
| * Compliant with CIM_33's ATINB_MISCIND_POR_TABLE |
| * Compliant with CIM_33's MISC_INIT_TBL |
| *****************************************/ |
| static void sr5650_por_misc_index_init(device_t nb_dev) |
| { |
| /* disable IOMMU */ |
| set_nbmisc_enable_bits(nb_dev, 0x75, 0x1, 0x0); |
| /* NBMISCIND:0x75[29]= 1 Device ID for hotplug and PME message */ |
| set_nbmisc_enable_bits(nb_dev, 0x75, 1 << 29, 1 << 29); |
| set_nbmisc_enable_bits(nb_dev, 0x75, 1 << 9, 1 << 9); /* no doc reference, comply with BTS */ |
| set_nbmisc_enable_bits(nb_dev, 0x46, 1 << 7, 1 << 7); /* bit7 BTS fail*/ |
| /*P2P*/ |
| set_nbmisc_enable_bits(nb_dev, 0x48, 1 << 8, 0); |
| |
| set_nbmisc_enable_bits(nb_dev, 0x2A, 1 << 15 | 1 << 17, 1 << 17); |
| set_nbmisc_enable_bits(nb_dev, 0x2B, 1 << 15 | 1 << 27, 1 << 15 | 1 << 27); |
| set_nbmisc_enable_bits(nb_dev, 0x2C, 1 << 0 | 1 << 1 | 1 << 5 | 1 << 4 | 1 << 10, 1 << 0 | 1 << 1 | 1 << 5); |
| set_nbmisc_enable_bits(nb_dev, 0x32, 0x3F << 20, 0x2A << 20); |
| set_nbmisc_enable_bits(nb_dev, 0x34, 1 << 7 | 1 << 15 | 1 << 23, 0); |
| set_nbmisc_enable_bits(nb_dev, 0x35, 0x3F << 26, 0x2A << 26); |
| set_nbmisc_enable_bits(nb_dev, 0x37, 0xfff << 20, 0xddd << 20); |
| set_nbmisc_enable_bits(nb_dev, 0x37, 7 << 11, 0); |
| /* PCIE CDR setting */ |
| set_nbmisc_enable_bits(nb_dev, 0x38, 0xFFFFFFFF, 0xC0C0C0); |
| set_nbmisc_enable_bits(nb_dev, 0x22, 0xFFFFFFFF, (1 << 27) | (0x8 << 12) | (0x8 << 16) | (0x8 << 20)); |
| set_nbmisc_enable_bits(nb_dev, 0x22, 1 << 1 | 1 << 2 | 1 << 6 | 1 << 7, 1 << 1 | 1 << 2 | 1 << 6 | 1 << 7); |
| |
| set_nbmisc_enable_bits(nb_dev, 0x07, 0xF << 4 | 1 << 24, 0xF << 4 | 1 << 24); |
| set_nbmisc_enable_bits(nb_dev, 0x67, 1 << 10 | 1 << 11 | 1 << 26, 1 << 11); |
| set_nbmisc_enable_bits(nb_dev, 0x67, 3 << 21, 3 << 21); |
| set_nbmisc_enable_bits(nb_dev, 0x68, 1 << 8 | 1 << 9 | 1 << 19, 1 << 9 | 1 << 19); |
| set_nbmisc_enable_bits(nb_dev, 0x6B, 3 << 3 | 1 << 15 | 0x1F << 27, 3 << 3 | 1 << 15 | 0x1F << 27); |
| set_nbmisc_enable_bits(nb_dev, 0x6C, 0xFFFFFFFF, 0x41183000); |
| |
| /* NB_MISC_IND_WR_EN + IOC_PCIE_CNTL |
| * Block non-snoop DMA request if PMArbDis is set. |
| * Set BMSetDis */ |
| set_nbmisc_enable_bits(nb_dev, 0x0B, 0xFFFFFFFF, 0x00400180); |
| set_nbmisc_enable_bits(nb_dev, 0x01, 0xFFFFFFFF, 0x00000310); |
| |
| /* NBCFG (NBMISCIND 0x0): NB_CNTL - |
| * HIDE_NB_AGP_CAP ([0], default=1)HIDE |
| * HIDE_P2P_AGP_CAP ([1], default=1)HIDE |
| * HIDE_NB_GART_BAR ([2], default=1)HIDE |
| * AGPMODE30 ([4], default=0)DISABLE |
| * AGP30ENCHANCED ([5], default=0)DISABLE |
| * HIDE_AGP_CAP ([8], default=1)ENABLE */ |
| set_nbmisc_enable_bits(nb_dev, 0x00, 0x0000FFFF, 0 << 0 | 1 << 1 | 1 << 2 | 0 << 6); |
| |
| /* IOC_LAT_PERF_CNTR_CNTL */ |
| set_nbmisc_enable_bits(nb_dev, 0x30, 0xFF, 0x00); |
| //set_nbmisc_enable_bits(nb_dev, 0x31, 0xFF, 0x00); |
| |
| /* IOC_LAT_PERF_CNTR_OUT */ |
| /* IOC_JTAG_CNTL */ |
| set_nbmisc_enable_bits(nb_dev, 0x47, 0xFFFFFFFF, 0x0000000B); |
| |
| set_nbmisc_enable_bits(nb_dev, 0x12, 0xFFFFFFFF, 0x00FB5555); |
| set_nbmisc_enable_bits(nb_dev, 0x0C, 0xFFFFFFFF, 0x001F37FC); |
| set_nbmisc_enable_bits(nb_dev, 0x15, 0xFFFFFFFF, 0x0); |
| |
| /* NB_PROG_DEVICE_REMAP */ |
| set_nbmisc_enable_bits(nb_dev, 0x20, 0xFFFFFFFF, 0x0); |
| set_nbmisc_enable_bits(nb_dev, 0x21, 0xFFFFFFFF, 0x0); |
| |
| /* Compliant with CIM_33's MISC_INIT_TBL, except Hide NB_BAR3_PCIE |
| * Enable access to DEV8 |
| * Enable setPower message for all ports |
| */ |
| set_nbmisc_enable_bits(nb_dev, 0x51, 1 << 20 | 1 << 8, 1 << 20 | 1 << 8); |
| set_nbmisc_enable_bits(nb_dev, 0x53, 1 << 20 | 1 << 8, 1 << 20 | 1 << 8); |
| set_nbmisc_enable_bits(nb_dev, 0x55, 1 << 20 | 1 << 8, 1 << 20 | 1 << 8); |
| set_nbmisc_enable_bits(nb_dev, 0x57, 1 << 20 | 1 << 8, 1 << 20 | 1 << 8); |
| set_nbmisc_enable_bits(nb_dev, 0x59, 1 << 20 | 1 << 8, 1 << 20 | 1 << 8); |
| set_nbmisc_enable_bits(nb_dev, 0x5B, 1 << 20 | 1 << 8, 1 << 20 | 1 << 8); |
| set_nbmisc_enable_bits(nb_dev, 0x5D, 1 << 20 | 1 << 8, 1 << 20 | 1 << 8); |
| set_nbmisc_enable_bits(nb_dev, 0x5F, 1 << 20 | 1 << 8, 1 << 20 | 1 << 8); |
| set_nbmisc_enable_bits(nb_dev, 0x61, 1 << 20 | 1 << 8, 1 << 20 | 1 << 8); |
| set_nbmisc_enable_bits(nb_dev, 0x63, 1 << 20 | 1 << 8, 1 << 20 | 1 << 8); |
| |
| /* Disable bus-master trigger event from SB and Enable set_slot_power message to SB */ |
| set_nbmisc_enable_bits(nb_dev, 0x0B, 0xffffffff, 0x400180); |
| } |
| |
| /***************************************** |
| * Some setting is from rpr. Some is from CIMx. |
| *****************************************/ |
| static void sr5650_por_htiu_index_init(device_t nb_dev) |
| { |
| device_t cpu_f0; |
| |
| cpu_f0 = PCI_DEV(0, 0x18, 0); |
| |
| set_htiu_enable_bits(nb_dev, 0x1C, 0x1<<17, 0x1<<17); |
| set_htiu_enable_bits(nb_dev, 0x05, 0x1<<8, 0x1<<8); |
| set_htiu_enable_bits(nb_dev, 0x06, 0x1<<0, 0x0<<0); |
| set_htiu_enable_bits(nb_dev, 0x06, 0x1<<1, 0x1<<1); |
| set_htiu_enable_bits(nb_dev, 0x06, 0x1<<9, 0x1<<9); |
| set_htiu_enable_bits(nb_dev, 0x06, 0x1<<13, 0x1<<13); |
| set_htiu_enable_bits(nb_dev, 0x06, 0x1<<17, 0x1<<17); |
| set_htiu_enable_bits(nb_dev, 0x06, 0x3<<15, 0x3<<15); |
| set_htiu_enable_bits(nb_dev, 0x06, 0x1<<25, 0x1<<25); |
| set_htiu_enable_bits(nb_dev, 0x06, 0x1<<30, 0x1<<30); |
| |
| set_htiu_enable_bits(nb_dev, 0x07, 0x1 << 0 | 0x1 << 1 | 0x1 << 2, 0x1 << 0); |
| |
| set_htiu_enable_bits(nb_dev, 0x16, 0x1<<11, 0x1<<11); |
| |
| set_htiu_enable_bits(nb_dev, 0x1D, 0x1<<2, 0x1<<2); |
| set_htiu_enable_bits(nb_dev, 0x1D, 0x1<<4, 0x1<<4); |
| |
| axindxc_reg(0x10, 1 << 9, 1 << 9); |
| set_pcie_enable_bits(nb_dev, 0x10 | 5 << 16, 1 << 9, 1 << 9); |
| set_htiu_enable_bits(nb_dev, 0x06, 0x1<<26, 0x1<<26); |
| set_htiu_enable_bits(nb_dev, 0x16, 0x1<<10, 0x1<<10); |
| |
| /* Enable BIAS circuit for all lanes. */ |
| //set_htiu_enable_bits(nb_dev, 0x2B, 0xF<<28, 0xF<<28); |
| set_htiu_enable_bits(nb_dev, 0x2B, 0xF << 28, 0); |
| set_htiu_enable_bits(nb_dev, 0x05, 0xFFFFFF, 0xFF558); |
| set_htiu_enable_bits(nb_dev, 0x06, 0xFFFFFFFE, 0x04203A202); |
| set_htiu_enable_bits(nb_dev, 0x0C, 0xFFFF, 0x101); |
| |
| /* A21 only */ |
| //if (REV_SR5650_A21 == get_nb_rev(nb_dev)) { |
| if (get_nb_rev(nb_dev) > REV_SR5650_A11) { |
| set_htiu_enable_bits(nb_dev, 0x05, 0x3<<3| 1<<6 | 1<<10 | 0xFF<<12, 0x3<<3 | 1<<6 | 1<<10 | 0xFF<<12); |
| set_htiu_enable_bits(nb_dev, 0x1D, 1 << 2 | 1 << 4, 0); |
| } |
| } |
| |
| /***************************************** |
| * Compliant with CIM_33's ATINB_POR_INIT_JMPDI |
| * Configure SR5650 registers to power-on default RPR. |
| * POR: Power On Reset |
| * RPR: Register Programming Requirements |
| *****************************************/ |
| static void sr5650_por_init(device_t nb_dev) |
| { |
| printk(BIOS_INFO, "sr5650_por_init\n"); |
| /* ATINB_PCICFG_POR_TABLE, initialize the values for sr5650 PCI Config registers */ |
| sr5650_por_pcicfg_init(nb_dev); |
| |
| /* ATINB_MISCIND_POR_TABLE */ |
| sr5650_por_misc_index_init(nb_dev); |
| |
| /* ATINB_HTIUNBIND_POR_TABLE */ |
| sr5650_por_htiu_index_init(nb_dev); |
| |
| /* ATINB_CLKCFG_PORT_TABLE */ |
| /* sr5650 A11 SB Link full swing? */ |
| } |
| |
| /* enable CFG access to Dev8, which is the SB P2P Bridge */ |
| void enable_sr5650_dev8(void) |
| { |
| set_nbmisc_enable_bits(PCI_DEV(0, 0, 0), 0x00, 1 << 6, 1 << 6); |
| } |
| |
| /* |
| * Compliant with CIM_33's AtiNBInitEarlyPost (AtiInitNBBeforePCIInit). |
| */ |
| void sr5650_before_pci_init(void) |
| { |
| } |
| |
| /* |
| * The calling sequence is same as CIM. |
| */ |
| void sr5650_early_setup(void) |
| { |
| device_t nb_dev = PCI_DEV(0, 0, 0); |
| printk(BIOS_INFO, "sr5650_early_setup()\n"); |
| |
| /*ATINB_PrepareInit */ |
| get_cpu_rev(); |
| |
| switch (get_nb_rev(nb_dev)) { /* PCIEMiscInit */ |
| case REV_SR5650_A11: |
| printk(BIOS_INFO, "NB Revision is A11.\n"); |
| break; |
| case REV_SR5650_A12: |
| printk(BIOS_INFO, "NB Revision is A12.\n"); |
| break; |
| case REV_SR5650_A21: |
| printk(BIOS_INFO, "NB Revision is A21.\n"); |
| break; |
| } |
| |
| fam10_optimization(); |
| sr5650_por_init(nb_dev); |
| } |
| |
| /** |
| * @brief disable GPP1 Port0,1, GPP2, GPP3a Port0,1,2,3,4,5, GPP3b |
| * |
| */ |
| void sr5650_disable_pcie_bridge(void) |
| { |
| u32 mask; |
| u32 reg; |
| device_t nb_dev = PCI_DEV(0, 0, 0); |
| |
| mask = (1 << 2) | (1 << 3); /*GPP1*/ |
| mask |= (1 << 4) | (1 << 5) | (1 << 6) | (1 << 7) | (1 << 16) | (1 << 17); /*GPP3a*/ |
| mask |= (1 << 18) | (1 << 19); /*GPP2*/ |
| mask |= (1 << 20); /*GPP3b*/ |
| reg = mask; |
| set_nbmisc_enable_bits(nb_dev, 0x0c, mask, reg); |
| } |