| #ifndef CPU_X86_MTRR_H |
| #define CPU_X86_MTRR_H |
| |
| /* These are the region types */ |
| #define MTRR_TYPE_UNCACHEABLE 0 |
| #define MTRR_TYPE_WRCOMB 1 |
| /*#define MTRR_TYPE_ 2*/ |
| /*#define MTRR_TYPE_ 3*/ |
| #define MTRR_TYPE_WRTHROUGH 4 |
| #define MTRR_TYPE_WRPROT 5 |
| #define MTRR_TYPE_WRBACK 6 |
| #define MTRR_NUM_TYPES 7 |
| |
| #define MTRRcap_MSR 0x0fe |
| |
| #define MTRRcapSmrr (1 << 11) |
| #define MTRRcapWc (1 << 10) |
| #define MTRRcapFix (1 << 8) |
| #define MTRRcapVcnt 0xff |
| |
| #define MTRRdefType_MSR 0x2ff |
| |
| #define MTRRdefTypeEn (1 << 11) |
| #define MTRRdefTypeFixEn (1 << 10) |
| #define MTRRdefTypeType 0xff |
| |
| #define SMRRphysBase_MSR 0x1f2 |
| #define SMRRphysMask_MSR 0x1f3 |
| |
| #define MTRRphysBase_MSR(reg) (0x200 + 2 * (reg)) |
| #define MTRRphysMask_MSR(reg) (0x200 + 2 * (reg) + 1) |
| |
| #define MTRRphysMaskValid (1 << 11) |
| |
| #define NUM_FIXED_RANGES 88 |
| #define RANGES_PER_FIXED_MTRR 8 |
| #define MTRRfix64K_00000_MSR 0x250 |
| #define MTRRfix16K_80000_MSR 0x258 |
| #define MTRRfix16K_A0000_MSR 0x259 |
| #define MTRRfix4K_C0000_MSR 0x268 |
| #define MTRRfix4K_C8000_MSR 0x269 |
| #define MTRRfix4K_D0000_MSR 0x26a |
| #define MTRRfix4K_D8000_MSR 0x26b |
| #define MTRRfix4K_E0000_MSR 0x26c |
| #define MTRRfix4K_E8000_MSR 0x26d |
| #define MTRRfix4K_F0000_MSR 0x26e |
| #define MTRRfix4K_F8000_MSR 0x26f |
| |
| #if !defined (__ASSEMBLER__) && !defined(__PRE_RAM__) |
| |
| /* |
| * The MTRR code has some side effects that the callers should be aware for. |
| * 1. The call sequence matters. x86_setup_mtrrs() calls |
| * x86_setup_fixed_mtrrs_no_enable() then enable_fixed_mtrrs() (equivalent |
| * of x86_setup_fixed_mtrrs()) then x86_setup_var_mtrrs(). If the callers |
| * want to call the components of x86_setup_mtrrs() because of other |
| * requirements the ordering should still preserved. |
| * 2. enable_fixed_mtrr() will enable both variable and fixed MTRRs because |
| * of the nature of the global MTRR enable flag. Therefore, all direct |
| * or indirect callers of enable_fixed_mtrr() should ensure that the |
| * variable MTRR MSRs do not contain bad ranges. |
| */ |
| void x86_setup_mtrrs(void); |
| /* |
| * x86_setup_var_mtrrs() parameters: |
| * address_bits - number of physical address bits supported by cpu |
| * above4gb - 2 means dynamically detect number of variable MTRRs available. |
| * non-zero means handle memory ranges above 4GiB. |
| * 0 means ignore memory ranges above 4GiB |
| */ |
| void x86_setup_var_mtrrs(unsigned int address_bits, unsigned int above4gb); |
| void enable_fixed_mtrr(void); |
| void x86_setup_fixed_mtrrs(void); |
| /* Set up fixed MTRRs but do not enable them. */ |
| void x86_setup_fixed_mtrrs_no_enable(void); |
| void x86_mtrr_check(void); |
| #endif |
| |
| #if !defined(__ASSEMBLER__) && defined(__PRE_RAM__) && !defined(__ROMCC__) |
| void set_var_mtrr(unsigned reg, unsigned base, unsigned size, unsigned type); |
| #endif |
| |
| /* Align up to next power of 2, suitable for ROMCC and assembler too. |
| * Range of result 256kB to 128MB is good enough here. |
| */ |
| #define _POW2_MASK(x) ((x>>1)|(x>>2)|(x>>3)|(x>>4)|(x>>5)| \ |
| (x>>6)|(x>>7)|(x>>8)|((1<<18)-1)) |
| #define _ALIGN_UP_POW2(x) ((x + _POW2_MASK(x)) & ~_POW2_MASK(x)) |
| |
| #if !defined(CONFIG_RAMTOP) || !CONFIG_RAMTOP |
| # error "CONFIG_RAMTOP not configured" |
| #endif |
| |
| #if ((CONFIG_XIP_ROM_SIZE & (CONFIG_XIP_ROM_SIZE -1)) != 0) |
| # error "CONFIG_XIP_ROM_SIZE is not a power of 2" |
| #endif |
| |
| /* Select CACHE_ROM_SIZE to use with MTRR setup. For most cases this |
| * resolves to a suitable CONFIG_ROM_SIZE but some odd cases need to |
| * use CONFIG_CACHE_ROM_SIZE_OVERRIDE in the mainboard Kconfig. |
| */ |
| #if (CONFIG_CACHE_ROM_SIZE_OVERRIDE != 0) |
| # define CACHE_ROM_SIZE CONFIG_CACHE_ROM_SIZE_OVERRIDE |
| #else |
| # if ((CONFIG_ROM_SIZE & (CONFIG_ROM_SIZE-1)) == 0) |
| # define CACHE_ROM_SIZE CONFIG_ROM_SIZE |
| # else |
| # define CACHE_ROM_SIZE _ALIGN_UP_POW2(CONFIG_ROM_SIZE) |
| # if (CACHE_ROM_SIZE < CONFIG_ROM_SIZE) || (CACHE_ROM_SIZE >= (2 * CONFIG_ROM_SIZE)) |
| # error "CACHE_ROM_SIZE is not optimal." |
| # endif |
| # endif |
| #endif |
| |
| #if ((CACHE_ROM_SIZE & (CACHE_ROM_SIZE-1)) != 0) |
| # error "CACHE_ROM_SIZE is not a power of 2." |
| #endif |
| |
| #define CACHE_ROM_BASE (((1<<20) - (CACHE_ROM_SIZE>>12))<<12) |
| |
| #if (CONFIG_RAMTOP & (CONFIG_RAMTOP - 1)) != 0 |
| # error "CONFIG_RAMTOP must be a power of 2" |
| #endif |
| |
| #endif /* CPU_X86_MTRR_H */ |