| ## |
| ## This file is part of the coreboot project. |
| ## |
| ## Copyright (C) 2009-2010 coresystems GmbH |
| ## |
| ## This program is free software; you can redistribute it and/or modify |
| ## it under the terms of the GNU General Public License as published by |
| ## the Free Software Foundation; version 2 of the License. |
| ## |
| ## This program is distributed in the hope that it will be useful, |
| ## but WITHOUT ANY WARRANTY; without even the implied warranty of |
| ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| ## GNU General Public License for more details. |
| ## |
| ## You should have received a copy of the GNU General Public License |
| ## along with this program; if not, write to the Free Software |
| ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| ## |
| |
| mainmenu "Coreboot Configuration" |
| |
| menu "General setup" |
| |
| config EXPERT |
| bool "Expert mode" |
| help |
| This allows you to select certain advanced configuration options. |
| |
| Warning: Only enable this option if you really know what you are |
| doing! You have been warned! |
| |
| config LOCALVERSION |
| string "Local version string" |
| help |
| Append an extra string to the end of the coreboot version. |
| |
| This can be useful if, for instance, you want to append the |
| respective board's hostname or some other identifying string to |
| the coreboot version number, so that you can easily distinguish |
| boot logs of different boards from each other. |
| |
| config CBFS_PREFIX |
| string "CBFS prefix to use" |
| default "fallback" |
| help |
| Select the prefix to all files put into the image. It's "fallback" |
| by default, "normal" is a common alternative. |
| |
| endmenu |
| |
| source src/mainboard/Kconfig |
| source src/arch/i386/Kconfig |
| |
| menu "Chipset" |
| |
| comment "CPU" |
| source src/cpu/Kconfig |
| comment "Northbridge" |
| source src/northbridge/Kconfig |
| comment "Southbridge" |
| source src/southbridge/Kconfig |
| comment "Super I/O" |
| source src/superio/Kconfig |
| comment "Devices" |
| source src/devices/Kconfig |
| |
| endmenu |
| |
| config PCI_BUS_SEGN_BITS |
| int |
| default 0 |
| |
| config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID |
| hex |
| default 0x0 |
| |
| config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID |
| hex |
| default 0x0 |
| |
| config CPU_ADDR_BITS |
| int |
| default 36 |
| |
| config XIP_ROM_BASE |
| hex |
| default 0xfffe0000 |
| |
| config XIP_ROM_SIZE |
| hex |
| default 0x20000 |
| |
| config LB_CKS_RANGE_START |
| int |
| default 49 |
| |
| config LB_CKS_RANGE_END |
| int |
| default 125 |
| |
| config LB_CKS_LOC |
| int |
| default 126 |
| |
| config LOGICAL_CPUS |
| bool |
| default y |
| |
| config PCI_ROM_RUN |
| bool |
| default n |
| |
| config HEAP_SIZE |
| hex |
| default 0x4000 |
| |
| config DEBUG |
| bool |
| default n |
| |
| config USE_PRINTK_IN_CAR |
| bool |
| default n |
| |
| config USE_OPTION_TABLE |
| bool |
| default n |
| |
| config MAX_CPUS |
| int |
| default 1 |
| |
| config MMCONF_SUPPORT_DEFAULT |
| bool |
| default n |
| |
| config MMCONF_SUPPORT |
| bool |
| default n |
| |
| config RAMTOP |
| hex |
| default 0x200000 |
| |
| config ATI_RAGE_XL |
| bool |
| |
| source src/console/Kconfig |
| |
| config HAVE_ACPI_RESUME |
| bool |
| default n |
| |
| config ACPI_SSDTX_NUM |
| int |
| default 0 |
| |
| config HAVE_FALLBACK_BOOT |
| bool |
| default y |
| |
| config USE_FALLBACK_IMAGE |
| bool |
| default y |
| |
| config HAVE_FAILOVER_BOOT |
| bool |
| default n |
| |
| config USE_FAILOVER_IMAGE |
| bool |
| default n |
| |
| config HAVE_HARD_RESET |
| bool |
| default y if BOARD_HAS_HARD_RESET |
| default n |
| help |
| This variable specifies whether a given board has a hard_reset |
| function, no matter if it's provided by board code or chipset code. |
| |
| config BOARD_HAS_HARD_RESET |
| bool |
| default n |
| help |
| This variable specifies whether a given board has a reset.c |
| file containing a hard_reset() function. |
| |
| config HAVE_INIT_TIMER |
| bool |
| default n if UDELAY_IO |
| default y |
| |
| config HAVE_MAINBOARD_RESOURCES |
| bool |
| default n |
| |
| config HAVE_OPTION_TABLE |
| bool |
| default y |
| help |
| This variable specifies whether a given board has a cmos.layout |
| file containing NVRAM/CMOS bit definitions. |
| It defaults to 'y' but can be changed to 'n' in mainboard/*/Kconfig. |
| |
| config PIRQ_ROUTE |
| bool |
| default n |
| |
| config HAVE_SMI_HANDLER |
| bool |
| default n |
| |
| config PCI_IO_CFG_EXT |
| bool |
| default n |
| |
| config IOAPIC |
| bool |
| default n |
| |
| # TODO: Can probably be removed once all chipsets have kconfig options for it. |
| config VIDEO_MB |
| int |
| default 0 |
| |
| config USE_WATCHDOG_ON_BOOT |
| bool |
| default n |
| |
| config VGA |
| bool |
| default n |
| help |
| Build board-specific VGA code. |
| |
| config GFXUMA |
| bool |
| default n |
| help |
| Enable Unified Memory Architecture for graphics. |
| |
| # TODO |
| # menu "Drivers" |
| # |
| # endmenu |
| |
| #TODO Remove this option or make it useful. |
| config HAVE_LOW_TABLES |
| bool |
| default y |
| help |
| This Option is unused in the code. Since two boards try to set it to |
| 'n', they may be broken. We either need to make the option useful or |
| get rid of it. The broken boards are: |
| asus/m2v-mx_se |
| supermicro/h8dme |
| |
| config HAVE_HIGH_TABLES |
| bool |
| default y |
| help |
| This variable specifies whether a given northbridge has high table |
| support. |
| It is set in northbridge/*/Kconfig. |
| Whether or not the high tables are actually written by coreboot is |
| configurable by the user via WRITE_HIGH_TABLES. |
| |
| config HAVE_ACPI_TABLES |
| bool |
| help |
| This variable specifies whether a given board has ACPI table support. |
| It is usually set in mainboard/*/Kconfig. |
| Whether or not the ACPI tables are actually generated by coreboot |
| is configurable by the user via GENERATE_ACPI_TABLES. |
| |
| config HAVE_MP_TABLE |
| bool |
| help |
| This variable specifies whether a given board has MP table support. |
| It is usually set in mainboard/*/Kconfig. |
| Whether or not the MP table is actually generated by coreboot |
| is configurable by the user via GENERATE_MP_TABLE. |
| |
| config HAVE_PIRQ_TABLE |
| bool |
| help |
| This variable specifies whether a given board has PIRQ table support. |
| It is usually set in mainboard/*/Kconfig. |
| Whether or not the PIRQ table is actually generated by coreboot |
| is configurable by the user via GENERATE_PIRQ_TABLE. |
| |
| #These Options are here to avoid "undefined" warnings. |
| #The actual selection and help texts are in the following menu. |
| |
| config GENERATE_ACPI_TABLES |
| bool |
| default HAVE_ACPI_TABLES |
| |
| config GENERATE_MP_TABLE |
| bool |
| default HAVE_MP_TABLE |
| |
| config GENERATE_PIRQ_TABLE |
| bool |
| default HAVE_PIRQ_TABLE |
| |
| config WRITE_HIGH_TABLES |
| bool |
| default HAVE_HIGH_TABLES |
| |
| menu "System tables" |
| |
| config WRITE_HIGH_TABLES |
| bool "Write 'high' tables to avoid being overwritten in F segment" |
| depends on HAVE_HIGH_TABLES |
| default y |
| |
| config MULTIBOOT |
| bool "Generate Multiboot tables (for GRUB2)" |
| default y |
| |
| config GENERATE_ACPI_TABLES |
| depends on HAVE_ACPI_TABLES |
| bool "Generate ACPI tables" |
| default y |
| help |
| Generate ACPI tables for this board. |
| |
| If unsure, say Y. |
| |
| config GENERATE_MP_TABLE |
| depends on HAVE_MP_TABLE |
| bool "Generate an MP table" |
| default y |
| help |
| Generate an MP table (conforming to the Intel MultiProcessor |
| specification 1.4) for this board. |
| |
| If unsure, say Y. |
| |
| config GENERATE_PIRQ_TABLE |
| depends on HAVE_PIRQ_TABLE |
| bool "Generate a PIRQ table" |
| default y |
| help |
| Generate a PIRQ table for this board. |
| |
| If unsure, say Y. |
| |
| endmenu |
| |
| menu "Payload" |
| |
| choice |
| prompt "Add a payload" |
| default PAYLOAD_NONE |
| |
| config PAYLOAD_NONE |
| bool "None" |
| help |
| Select this option if you want to create an "empty" coreboot |
| ROM image for a certain mainboard, i.e. a coreboot ROM image |
| which does not yet contain a payload. |
| |
| For such an image to be useful, you have to use 'cbfstool' |
| to add a payload to the ROM image later. |
| |
| config PAYLOAD_ELF |
| bool "An ELF executable payload" |
| help |
| Select this option if you have a payload image (an ELF file) |
| which coreboot should run as soon as the basic hardware |
| initialization is completed. |
| |
| You will be able to specify the location and file name of the |
| payload image later. |
| |
| endchoice |
| |
| config FALLBACK_PAYLOAD_FILE |
| string "Payload path and filename" |
| depends on PAYLOAD_ELF |
| default "payload.elf" |
| help |
| The path and filename of the ELF executable file to use as payload. |
| |
| # TODO: Defined if no payload? Breaks build? |
| config COMPRESSED_PAYLOAD_LZMA |
| bool "Use LZMA compression for payloads" |
| default y |
| depends on PAYLOAD_ELF |
| help |
| In order to reduce the size payloads take up in the ROM chip |
| coreboot can compress them using the LZMA algorithm. |
| |
| config COMPRESSED_PAYLOAD_NRV2B |
| bool |
| default n |
| |
| endmenu |
| |
| menu "VGA BIOS" |
| |
| config VGA_BIOS |
| bool "Add a VGA BIOS image" |
| help |
| Select this option if you have a VGA BIOS image that you would |
| like to add to your ROM. |
| |
| You will be able to specify the location and file name of the |
| image later. |
| |
| config FALLBACK_VGA_BIOS_FILE |
| string "VGA BIOS path and filename" |
| depends on VGA_BIOS |
| default "vgabios.bin" |
| help |
| The path and filename of the file to use as VGA BIOS. |
| |
| config FALLBACK_VGA_BIOS_ID |
| string "VGA device PCI IDs" |
| depends on VGA_BIOS |
| default "1106,3230" |
| help |
| The comma-separated PCI vendor and device ID that would associate |
| your VGA BIOS to your video card. |
| |
| Example: 1106,3230 |
| |
| In the above example 1106 is the PCI vendor ID (in hex, but without |
| the "0x" prefix) and 3230 specifies the PCI device ID of the |
| video card (also in hex, without "0x" prefix). |
| |
| endmenu |
| |
| menu "Debugging" |
| |
| # TODO: Better help text and detailed instructions. |
| config GDB_STUB |
| bool "GDB debugging support" |
| default y |
| help |
| If enabled, you will be able to set breakpoints for gdb debugging. |
| See src/arch/i386/lib/c_start.S for details. |
| |
| endmenu |
| |
| config LIFT_BSP_APIC_ID |
| bool |
| default n |
| |
| # These probably belong somewhere else, but they are needed somewhere. |
| config AP_CODE_IN_CAR |
| bool |
| default n |
| |
| config USE_INIT |
| bool |
| default n |
| |
| config ENABLE_APIC_EXT_ID |
| bool |
| default n |
| |
| config WARNINGS_ARE_ERRORS |
| bool |
| default n |
| |
| config ID_SECTION_OFFSET |
| hex |
| default 0x10 |