| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <baseboard/variants.h> |
| #include <baseboard/port_descriptors.h> |
| #include <console/console.h> |
| #include <soc/platform_descriptors.h> |
| |
| enum markarth_dxio_port_id { |
| MARKARTH_DXIO_WLAN, |
| MARKARTH_DXIO_STORAGE, |
| }; |
| |
| #define EMMC_DXIO_DESCRIPTOR { \ |
| .engine_type = PCIE_ENGINE, \ |
| .port_present = true, \ |
| .start_logical_lane = 1, \ |
| .end_logical_lane = 1, \ |
| .device_number = PCI_SLOT(SD_DEVFN), \ |
| .function_number = PCI_FUNC(SD_DEVFN), \ |
| .link_speed_capability = GEN3, \ |
| .turn_off_unused_lanes = true, \ |
| .link_aspm = ASPM_L1, \ |
| .link_aspm_L1_1 = true, \ |
| .link_aspm_L1_2 = true, \ |
| .gpio_group_id = GPIO_6, \ |
| .clk_req = CLK_REQ1, \ |
| } |
| |
| #define EMMC_CLKREQ_GPIO 115 |
| |
| static fsp_dxio_descriptor markarth_dxio_descriptors[] = { |
| [MARKARTH_DXIO_WLAN] = WLAN_DXIO_DESCRIPTOR, |
| /* This value modified at runtime, default to emmc */ |
| [MARKARTH_DXIO_STORAGE] = EMMC_DXIO_DESCRIPTOR, |
| }; |
| |
| void variant_get_dxio_descriptors(const fsp_dxio_descriptor **dxio_descriptor, size_t *num) |
| { |
| /* |
| * We can determine if a device is populated based on the state of the clkreq |
| * signal. If the device is present, the clkreq is held low by the device. If |
| * no device is present, clkreq is pulled high by an external pull-up. |
| * |
| * This allows checking the state of the NVMe device clkreq signal and enabling |
| * either eMMC or NVMe based on that. |
| */ |
| if (gpio_get(EMMC_CLKREQ_GPIO)) { |
| printk(BIOS_DEBUG, "Enabling NVMe.\n"); |
| markarth_dxio_descriptors[MARKARTH_DXIO_STORAGE] = (fsp_dxio_descriptor)NVME_DXIO_DESCRIPTOR; |
| } else { |
| printk(BIOS_DEBUG, "Defaulting to eMMC.\n"); |
| } |
| *dxio_descriptor = markarth_dxio_descriptors; |
| *num = ARRAY_SIZE(markarth_dxio_descriptors); |
| } |