| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2013 Sage Electronic Engineering, LLC |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <device/device.h> |
| #include <delay.h> |
| #include <device/pci.h> |
| #include <device/pci_ids.h> |
| #include <device/pci_ops.h> |
| #include <arch/io.h> |
| #include "hudson.h" |
| |
| static void sd_init(struct device *dev) |
| { |
| u32 stepping; |
| |
| stepping = pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x18, 3)), 0xFC); |
| |
| struct southbridge_amd_agesa_hudson_config *sd_chip = |
| (struct southbridge_amd_agesa_hudson_config *)(dev->chip_info); |
| |
| if (sd_chip->sd_mode == 3) { /* SD 3.0 mode */ |
| pci_write_config32(dev, 0xA4, 0x31FEC8B2); |
| pci_write_config32(dev, 0xA8, 0x00002503); |
| pci_write_config32(dev, 0xB0, 0x02180C19); |
| pci_write_config32(dev, 0xD0, 0x0000078B); |
| } |
| else { /* SD 2.0 mode */ |
| if ((stepping & 0x0000000F) == 0) { /* Stepping A0 */ |
| pci_write_config32(dev, 0xA4, 0x31DE32B2); |
| pci_write_config32(dev, 0xB0, 0x01180C19); |
| pci_write_config32(dev, 0xD0, 0x0000058B); |
| } |
| else { /* Stepping >= A1 */ |
| pci_write_config32(dev, 0xA4, 0x31FE3FB2); |
| pci_write_config32(dev, 0xB0, 0x01180C19); |
| pci_write_config32(dev, 0xD0, 0x0000078B); |
| } |
| } |
| } |
| |
| static struct device_operations sd_ops = { |
| .read_resources = pci_dev_read_resources, |
| .set_resources = pci_dev_set_resources, |
| .enable_resources = pci_dev_enable_resources, |
| .init = sd_init, |
| .scan_bus = 0, |
| }; |
| |
| static const struct pci_driver sd_driver __pci_driver = { |
| .ops = &sd_ops, |
| .vendor = PCI_VENDOR_ID_AMD, |
| .device = PCI_DEVICE_ID_AMD_YANGTZE_SD, |
| }; |