| chip soc/intel/skylake |
| |
| register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # Type-C Port 1 |
| register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC1)" # Type-C Port 2 |
| register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth |
| register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" # Type-A Port (card) |
| register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera |
| register "usb2_ports[8]" = "USB2_PORT_LONG(OC3)" # Type-A Port (board) |
| |
| register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1 |
| register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-C Port 2 |
| register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port (card) |
| register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port (board) |
| |
| # I2C0 is 3.3V |
| register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3" |
| |
| # Use default SD card detect GPIO configuration |
| register "sdcard_cd_gpio_default" = "GPP_A7" |
| |
| device domain 0 on |
| device pci 15.0 on |
| chip drivers/i2c/generic |
| register "hid" = ""RAYD0001"" |
| register "desc" = ""Raydium Touchscreen"" |
| register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)" |
| device i2c 39 on end |
| end |
| end # I2C #0 |
| device pci 15.1 on |
| chip drivers/i2c/generic |
| register "hid" = ""ELAN0000"" |
| register "desc" = ""ELAN Touchpad"" |
| register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)" |
| register "wake" = "GPE0_DW0_05" |
| device i2c 15 on end |
| end |
| end # I2C #1 |
| device pci 19.2 on |
| chip drivers/i2c/nau8825 |
| register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)" |
| register "jkdet_enable" = "1" |
| register "jkdet_pull_enable" = "1" |
| register "jkdet_pull_up" = "1" |
| register "jkdet_polarity" = "1" # ActiveLow |
| register "vref_impedance" = "2" # 125kOhm |
| register "micbias_voltage" = "6" # 2.754 |
| register "sar_threshold_num" = "4" |
| register "sar_threshold[0]" = "0x08" |
| register "sar_threshold[1]" = "0x12" |
| register "sar_threshold[2]" = "0x26" |
| register "sar_threshold[3]" = "0x73" |
| register "sar_hysteresis" = "0" |
| register "sar_voltage" = "6" |
| register "sar_compare_time" = "1" # 1us |
| register "sar_sampling_time" = "1" # 4us |
| register "short_key_debounce" = "3" # 30ms |
| register "jack_insert_debounce" = "7" # 512ms |
| register "jack_eject_debounce" = "0" |
| device i2c 1a on end |
| end |
| chip drivers/i2c/generic |
| register "hid" = ""INT343B"" |
| register "desc" = ""SSM4567 Left Speaker Amp"" |
| register "uid" = "0" |
| register "device_present_gpio" = "GPP_E3" |
| device i2c 34 on end |
| end |
| chip drivers/i2c/generic |
| register "hid" = ""INT343B"" |
| register "desc" = ""SSM4567 Right Speaker Amp"" |
| register "uid" = "1" |
| register "device_present_gpio" = "GPP_E3" |
| device i2c 35 on end |
| end |
| end # I2C #4 |
| device pci 1e.6 on end # SDCard |
| device pci 1f.3 on |
| chip drivers/generic/max98357a |
| register "hid" = ""MX98357A"" |
| register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E3)" |
| register "device_present_gpio" = "GPP_E3" |
| register "device_present_gpio_invert" = "1" |
| register "sdmode_delay" = "5" |
| device generic 0 on end |
| end |
| end # Intel HDA |
| end |
| end |