| #include <console/console.h> |
| #include <device/device.h> |
| #include <device/pci.h> |
| #include <string.h> |
| #include <cpu/cpu.h> |
| #include <cpu/x86/lapic.h> |
| #include <cpu/x86/cache.h> |
| |
| #if 0 |
| #include <cpu/amd/gx2def.h> |
| #include <arch/io.h> |
| |
| static void gx2_cpu_setup(void) |
| { |
| unsigned char rreg; |
| unsigned char cpu_table[] = { |
| 0xc1, 0x00, /* NO SMIs */ |
| 0xc3, 0x14, /* Enable CPU config register */ |
| 0x20, 0x00, /* */ |
| 0xb8, GX_BASE>>30, /* Enable GXBASE address */ |
| 0xc2, 0x00, |
| 0xe8, 0x98, |
| 0xc3, 0xf8, /* Enable CPU config register */ |
| 0x00, 0x00 |
| }; |
| unsigned char *cPtr = cpu_table; |
| |
| while(rreg = *cPtr++) { |
| unsigned char rval = *cPtr++; |
| outb(rreg, 0x22); |
| outb(rval, 0x23); |
| } |
| |
| outb(0xff, 0x22); /* DIR1 -- Identification register 1 */ |
| if(inb(0x23) > 0x63) { /* Rev greater than R3 */ |
| outb(0xe8, 0x22); |
| outb(inb(0x23) | 0x20, 0x23); /* Enable FPU Fast Mode */ |
| |
| outb(0xf0, 0x22); |
| outb(inb(0x23) | 0x02, 0x23); /* Incrementor on */ |
| |
| outb(0x20, 0x22); |
| outb(inb(0x23) | 0x24, 0x23); /* Bit 5 must be on */ |
| /* Bit 2 Incrementor margin 10 */ |
| |
| } |
| } |
| |
| static void gx2_gx_setup(void) |
| { |
| unsigned long gx_setup_table[] = { |
| GX_BASE + DC_UNLOCK, DC_UNLOCK_MAGIC, |
| GX_BASE + DC_GENERAL_CFG, 0, |
| GX_BASE + DC_UNLOCK, 0, |
| GX_BASE + BC_DRAM_TOP, 0x3fffffff, |
| GX_BASE + BC_XMAP_1, 0x60, |
| GX_BASE + BC_XMAP_2, 0, |
| GX_BASE + BC_XMAP_3, 0, |
| GX_BASE + MC_BANK_CFG, 0x00700070, |
| GX_BASE + MC_MEM_CNTRL1, XBUSARB, |
| GX_BASE + MC_GBASE_ADD, 0xff, |
| 0, 0 |
| }; |
| |
| unsigned long *gxPtr = gx_setup_table; |
| unsigned long *gxdPtr; |
| unsigned long addr; |
| |
| while(addr = *gxPtr++) { |
| gxdPtr = (unsigned long *)addr; |
| *gxdPtr = *gxPtr++; |
| } |
| } |
| #endif |
| |
| #include "cpureginit.c" |
| |
| static void model_gx2_init(device_t dev) |
| { |
| void do_vsmbios(void); |
| #if 0 |
| gx2_cpu_setup(); |
| gx2_gx_setup(); |
| #endif |
| printk_debug("model_gx2_init\n"); |
| /* Turn on caching if we haven't already */ |
| x86_enable_cache(); |
| |
| /* Enable the local cpu apics */ |
| setup_lapic(); |
| |
| do_vsmbios(); |
| printk_debug("model_gx2_init DONE\n"); |
| }; |
| |
| static struct device_operations cpu_dev_ops = { |
| .init = model_gx2_init, |
| }; |
| |
| static struct cpu_device_id cpu_table[] = { |
| { X86_VENDOR_CYRIX, 0x0540 }, |
| { 0, 0 }, |
| }; |
| |
| static struct cpu_driver driver __cpu_driver = { |
| .ops = &cpu_dev_ops, |
| .id_table = cpu_table, |
| }; |