| chip northbridge/intel/sandybridge |
| # IGD Displays |
| register "gfx" = "GMA_STATIC_DISPLAYS(1)" |
| |
| register "gpu_dp_d_hotplug" = "0x04" |
| |
| # Enable Panel as LVDS and configure power delays |
| register "gpu_panel_port_select" = "PANEL_PORT_LVDS" |
| register "gpu_panel_power_cycle_delay" = "4" |
| register "gpu_panel_power_up_delay" = "100" |
| register "gpu_panel_power_down_delay" = "100" |
| register "gpu_panel_power_backlight_on_delay" = "3000" |
| register "gpu_panel_power_backlight_off_delay" = "2000" |
| register "gpu_cpu_backlight" = "0x1155" |
| register "gpu_pch_backlight" = "0x11551155" |
| |
| register "spd_addresses" = "{0x50, 0, 0x52, 0}" |
| |
| device domain 0 on |
| subsystemid 0x17aa 0x21fe inherit |
| |
| device ref host_bridge on end # Host bridge |
| device ref peg10 off end # PCIe Bridge for discrete graphics |
| device ref igd on end # Internal graphics VGA controller |
| device ref dev4 off end # Signal processing controller |
| |
| chip southbridge/intel/bd82x6x |
| # GPI routing |
| register "alt_gp_smi_en" = "0x0000" |
| register "gpi6_routing" = "2" |
| register "gpi13_routing" = "2" |
| |
| # Enable SATA ports 0 (2.5 inch) and 1 (mSATA) |
| register "sata_port_map" = "0x3" |
| # Set max SATA speed to 6.0 Gb/s |
| register "sata_interface_speed_support" = "0x3" |
| |
| register "gen1_dec" = "0x007c1611" |
| register "gen2_dec" = "0x00040069" |
| register "gen3_dec" = "0x000c0701" |
| register "gen4_dec" = "0x000c06a1" |
| |
| register "xhci_switchable_ports" = "0xf" |
| register "superspeed_capable_ports" = "0xf" |
| register "xhci_overcurrent_mapping" = "0x00000c03" |
| |
| # Enable zero-based linear PCIe root port functions |
| register "pcie_port_coalesce" = "true" |
| |
| register "spi_uvscc" = "0x2005" |
| register "spi_lvscc" = "0x2005" |
| |
| device ref xhci on end # USB 3.0 Controller |
| device ref mei1 on end # Management Engine Interface 1 |
| device ref mei2 off end # Management Engine Interface 2 |
| device ref me_ide_r off end # Management Engine IDE-R |
| device ref me_kt off end # Management Engine KT |
| device ref gbe off end # Intel Gigabit Ethernet |
| device ref ehci2 on end # USB2 EHCI #2 |
| device ref hda on end # High Definition Audio controller |
| device ref pcie_rp1 on end # PCIe Port #1 |
| device ref pcie_rp2 on end # PCIe Port #2 (WLAN card) |
| device ref pcie_rp3 on end # PCIe Port #3 (Card Reader) |
| device ref pcie_rp4 off end # PCIe Port #4 |
| device ref pcie_rp5 off end # PCIe Port #5 |
| device ref pcie_rp6 on end # PCIe Port #6 (Ethernet controller) |
| device ref pcie_rp7 off end # PCIe Port #7 |
| device ref pcie_rp8 off end # PCIe Port #8 |
| device ref ehci1 on end # USB2 EHCI #1 |
| device ref pci_bridge off end # PCI bridge |
| device ref lpc on # LPC bridge PCI-LPC bridge |
| chip drivers/pc80/tpm |
| device pnp 0c31.0 on end |
| end |
| |
| chip ec/lenovo/h8 |
| device pnp ff.1 on # dummy |
| io 0x60 = 0x62 |
| io 0x62 = 0x66 |
| io 0x64 = 0x1600 |
| io 0x66 = 0x1604 |
| end |
| |
| register "config0" = "0xa6" |
| register "config1" = "0x04" |
| register "config2" = "0xa0" |
| register "config3" = "0x62" |
| |
| register "has_keyboard_backlight" = "0" |
| |
| register "beepmask0" = "0x00" |
| register "beepmask1" = "0x87" |
| register "has_power_management_beeps" = "0" |
| |
| register "event0_enable" = "0xff" |
| register "event1_enable" = "0xff" |
| register "event2_enable" = "0xff" |
| register "event3_enable" = "0xff" |
| register "event4_enable" = "0xff" |
| register "event5_enable" = "0xff" |
| register "event6_enable" = "0xff" |
| register "event7_enable" = "0xff" |
| register "event8_enable" = "0xff" |
| register "event9_enable" = "0xff" |
| register "eventa_enable" = "0xff" |
| register "eventb_enable" = "0xff" |
| register "eventc_enable" = "0xff" |
| register "eventd_enable" = "0xff" |
| register "evente_enable" = "0xff" |
| register "eventf_enable" = "0xff" |
| end |
| end |
| device ref sata1 on end # SATA Controller 1 |
| device ref smbus on # SMBus |
| # eeprom, 8 virtual devices, same chip |
| chip drivers/i2c/at24rf08c |
| device i2c 54 on end |
| device i2c 55 on end |
| device i2c 56 on end |
| device i2c 57 on end |
| device i2c 5c on end |
| device i2c 5d on end |
| device i2c 5e on end |
| device i2c 5f on end |
| end |
| end |
| device ref sata2 off end # SATA Controller 2 |
| device ref thermal off end # Thermal |
| end |
| end |
| end |