| /* SPDX-License-Identifier: GPL-2.0-or-later */ |
| |
| #include "chip.h" |
| #include <console/console.h> |
| #include <device/mmio.h> |
| #include <device/device.h> |
| #include <device/pci.h> |
| #include <intelblocks/pmc.h> |
| #include <intelblocks/pmclib.h> |
| #include <soc/iomap.h> |
| #include <soc/pm.h> |
| #include <timer.h> |
| |
| /* Fill up PMC resource structure */ |
| int pmc_soc_get_resources(struct pmc_resource_config *cfg) |
| { |
| cfg->pwrmbase_offset = PCI_BASE_ADDRESS_0; |
| cfg->pwrmbase_addr = PMC_BAR0; |
| cfg->pwrmbase_size = PMC_BAR0_SIZE; |
| cfg->abase_offset = PCI_BASE_ADDRESS_4; |
| cfg->abase_addr = ACPI_BASE_ADDRESS; |
| cfg->abase_size = ACPI_BASE_SIZE; |
| |
| return 0; |
| } |
| |
| static int choose_slp_s3_assertion_width(int width_usecs) |
| { |
| int i; |
| static const struct { |
| int max_width; |
| int value; |
| } slp_s3_settings[] = { |
| { |
| .max_width = 60, |
| .value = SLP_S3_ASSERT_60_USEC, |
| }, |
| { |
| .max_width = 1 * USECS_PER_MSEC, |
| .value = SLP_S3_ASSERT_1_MSEC, |
| }, |
| { |
| .max_width = 50 * USECS_PER_MSEC, |
| .value = SLP_S3_ASSERT_50_MSEC, |
| }, |
| { |
| .max_width = 2 * USECS_PER_SEC, |
| .value = SLP_S3_ASSERT_2_SEC, |
| }, |
| }; |
| |
| for (i = 0; i < ARRAY_SIZE(slp_s3_settings); i++) { |
| if (width_usecs <= slp_s3_settings[i].max_width) |
| break; |
| } |
| |
| /* Provide conservative default if nothing set in devicetree |
| * or requested assertion width too large. */ |
| if (width_usecs <= 0 || i == ARRAY_SIZE(slp_s3_settings)) |
| i = ARRAY_SIZE(slp_s3_settings) - 1; |
| |
| printk(BIOS_DEBUG, "SLP S3 assertion width: %d usecs\n", |
| slp_s3_settings[i].max_width); |
| |
| return slp_s3_settings[i].value; |
| } |
| |
| static void set_slp_s3_assertion_width(int width_usecs) |
| { |
| uint32_t reg; |
| uintptr_t gen_pmcon3 = soc_read_pmc_base() + GEN_PMCON3; |
| int setting = choose_slp_s3_assertion_width(width_usecs); |
| |
| reg = read32((void *)gen_pmcon3); |
| reg &= ~SLP_S3_ASSERT_MASK; |
| reg |= setting << SLP_S3_ASSERT_WIDTH_SHIFT; |
| write32((void *)gen_pmcon3, reg); |
| } |
| |
| void pmc_soc_init(struct device *dev) |
| { |
| const struct soc_intel_apollolake_config *cfg = config_of(dev); |
| |
| /* Set up GPE configuration */ |
| pmc_gpe_init(); |
| pmc_set_acpi_mode(); |
| |
| if (cfg != NULL) |
| set_slp_s3_assertion_width(cfg->slp_s3_assertion_width_usecs); |
| |
| /* Log power state */ |
| pch_log_state(); |
| |
| /* Now that things have been logged clear out the PMC state. */ |
| pmc_clear_prsts(); |
| |
| pmc_set_power_failure_state(true); |
| } |