| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <stdint.h> |
| #include <northbridge/intel/haswell/haswell.h> |
| #include <northbridge/intel/haswell/raminit.h> |
| #include <southbridge/intel/lynxpoint/pch.h> |
| #include <option.h> |
| #include <ec/lenovo/pmh7/pmh7.h> |
| #include <device/pci_ops.h> |
| |
| void mainboard_config_rcba(void) |
| { |
| RCBA16(D31IR) = DIR_ROUTE(PIRQA, PIRQD, PIRQC, PIRQA); |
| RCBA16(D29IR) = DIR_ROUTE(PIRQH, PIRQD, PIRQA, PIRQC); |
| RCBA16(D28IR) = DIR_ROUTE(PIRQA, PIRQA, PIRQA, PIRQA); |
| RCBA16(D27IR) = DIR_ROUTE(PIRQG, PIRQB, PIRQC, PIRQD); |
| RCBA16(D26IR) = DIR_ROUTE(PIRQA, PIRQF, PIRQC, PIRQD); |
| RCBA16(D25IR) = DIR_ROUTE(PIRQE, PIRQF, PIRQG, PIRQH); |
| RCBA16(D22IR) = DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD); |
| RCBA16(D20IR) = DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD); |
| } |
| |
| void mb_late_romstage_setup(void) |
| { |
| u8 enable_peg = get_uint_option("enable_dual_graphics", 0); |
| |
| bool power_en = pmh7_dgpu_power_state(); |
| |
| if (enable_peg != power_en) |
| pmh7_dgpu_power_enable(!power_en); |
| |
| if (!enable_peg) { |
| // Hide disabled dGPU device |
| pci_and_config32(HOST_BRIDGE, DEVEN, ~DEVEN_D1F0EN); |
| } |
| } |
| |
| void mb_get_spd_map(struct spd_info *spdi) |
| { |
| spdi->addresses[0] = 0x50; |
| spdi->addresses[2] = 0x51; |
| } |
| |
| const struct usb2_port_config mainboard_usb2_ports[MAX_USB2_PORTS] = { |
| /* Length, Enable, OCn#, Location */ |
| { 0x0040, 1, 0, USB_PORT_BACK_PANEL }, /* USB3 */ |
| { 0x0040, 1, 0, USB_PORT_BACK_PANEL }, /* USB3 */ |
| { 0x0110, 1, 1, USB_PORT_BACK_PANEL }, /* USB2 charge */ |
| { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, |
| { 0x0080, 1, USB_OC_PIN_SKIP, USB_PORT_DOCK }, |
| { 0x0080, 1, 2, USB_PORT_BACK_PANEL }, /* USB2 */ |
| { 0x0040, 1, 3, USB_PORT_BACK_PANEL }, |
| { 0x0040, 1, 3, USB_PORT_BACK_PANEL }, |
| { 0x0040, 1, 4, USB_PORT_BACK_PANEL }, |
| { 0x0110, 1, 4, USB_PORT_BACK_PANEL }, /* WWAN */ |
| { 0x0040, 1, 5, USB_PORT_INTERNAL }, /* WLAN */ |
| { 0x0040, 1, 5, USB_PORT_BACK_PANEL }, /* webcam */ |
| { 0x0080, 1, 6, USB_PORT_BACK_PANEL }, |
| { 0x0040, 1, 6, USB_PORT_BACK_PANEL }, |
| }; |
| |
| const struct usb3_port_config mainboard_usb3_ports[MAX_USB3_PORTS] = { |
| { 1, 0 }, |
| { 1, 0 }, |
| { 1, USB_OC_PIN_SKIP }, |
| { 1, USB_OC_PIN_SKIP }, |
| { 1, 1 }, |
| { 1, 1 }, /* WWAN */ |
| }; |