Rename ECAM-specific MMCONF Kconfigs
Currently, the MMCONF Kconfigs only support the Enhanced Configuration
Access mechanism (ECAM) method for accessing the PCI config address
space. Some platforms have a different way of mapping the PCI config
space to memory. This patch renames the following configs to
make it clear that these configs are ECAM-specific:
- NO_MMCONF_SUPPORT --> NO_ECAM_MMCONF_SUPPORT
- MMCONF_SUPPORT --> ECAM_MMCONF_SUPPORT
- MMCONF_BASE_ADDRESS --> ECAM_MMCONF_BASE_ADDRESS
- MMCONF_BUS_NUMBER --> ECAM_MMCONF_BUS_NUMBER
- MMCONF_LENGTH --> ECAM_MMCONF_LENGTH
Please refer to CB:57861 "Proposed coreboot Changes" for more
details.
BUG=b:181098581
BRANCH=None
TEST=./util/abuild/abuild -p none -t GOOGLE_KOHAKU -x -a -c max
Make sure Jenkins verifies that builds on other boards
Change-Id: I1e196a1ed52d131a71f00cba1d93a23e54aca3e2
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
diff --git a/src/northbridge/intel/gm45/bootblock.c b/src/northbridge/intel/gm45/bootblock.c
index a9a1e8e..eb1aa0a 100644
--- a/src/northbridge/intel/gm45/bootblock.c
+++ b/src/northbridge/intel/gm45/bootblock.c
@@ -9,7 +9,7 @@
static uint32_t encode_pciexbar_length(void)
{
- switch (CONFIG_MMCONF_BUS_NUMBER) {
+ switch (CONFIG_ECAM_MMCONF_BUS_NUMBER) {
case 256: return 0 << 1;
case 128: return 1 << 1;
case 64: return 2 << 1;
@@ -21,17 +21,17 @@
{
/*
* The "io" variant of the config access is explicitly used to
- * setup the PCIEXBAR because CONFIG(MMCONF_SUPPORT) is set to
+ * setup the PCIEXBAR because CONFIG(ECAM_MMCONF_SUPPORT) is set to
* true. That way all subsequent non-explicit config accesses use
* MCFG. This code also assumes that bootblock_northbridge_init() is
* the first thing called in the non-asm boot block code. The final
* assumption is that no assembly code is using the
- * CONFIG(MMCONF_SUPPORT) option to do PCI config accesses.
+ * CONFIG(ECAM_MMCONF_SUPPORT) option to do PCI config accesses.
*
* The PCIEXBAR is assumed to live in the memory mapped IO space under
* 4GiB.
*/
- const uint32_t reg32 = CONFIG_MMCONF_BASE_ADDRESS | encode_pciexbar_length() | 1;
+ const uint32_t reg32 = CONFIG_ECAM_MMCONF_BASE_ADDRESS | encode_pciexbar_length() | 1;
pci_io_write_config32(PCI_DEV(0, 0, 0), D0F0_PCIEXBAR_HI, 0);
pci_io_write_config32(PCI_DEV(0, 0, 0), D0F0_PCIEXBAR_LO, reg32);
}