blob: cffe71b8daa8416f301935d4eaac00f1f00d05b2 [file] [log] [blame]
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Google Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <arch/io.h>
#include <device/device.h>
#include <device/pci_def.h>
#include <device/pci_ops.h>
#include <reg_script.h>
#include <soc/iomap.h>
#include <soc/lpc.h>
#include <soc/pch.h>
#include <soc/pci_devs.h>
#include <soc/pm.h>
#include <soc/rcba.h>
#include <soc/romstage.h>
#include <soc/smbus.h>
#include <soc/intel/broadwell/chip.h>
const struct reg_script pch_early_init_script[] = {
/* Setup southbridge BARs */
REG_PCI_WRITE32(RCBA, RCBA_BASE_ADDRESS | 1),
REG_PCI_WRITE32(PMBASE, ACPI_BASE_ADDRESS | 1),
REG_PCI_WRITE8(ACPI_CNTL, ACPI_EN),
REG_PCI_WRITE32(GPIO_BASE, GPIO_BASE_ADDRESS | 1),
REG_PCI_WRITE8(GPIO_CNTL, GPIO_EN),
/* Set COM1/COM2 decode range */
REG_PCI_WRITE16(LPC_IO_DEC, 0x0010),
/* Enable legacy decode ranges */
REG_PCI_WRITE16(LPC_EN, CNF1_LPC_EN | CNF2_LPC_EN | GAMEL_LPC_EN |
COMA_LPC_EN | KBC_LPC_EN | MC_LPC_EN),
/* Enable IOAPIC */
REG_MMIO_WRITE16(RCBA_BASE_ADDRESS + OIC, 0x0100),
/* Read back for posted write */
REG_MMIO_READ16(RCBA_BASE_ADDRESS + OIC),
/* Set HPET address and enable it */
REG_MMIO_RMW32(RCBA_BASE_ADDRESS + HPTC, ~3, (1 << 7)),
/* Read back for posted write */
REG_MMIO_READ32(RCBA_BASE_ADDRESS + HPTC),
/* Enable HPET to start counter */
REG_MMIO_OR32(HPET_BASE_ADDRESS + 0x10, (1 << 0)),
/* Disable reset */
REG_MMIO_OR32(RCBA_BASE_ADDRESS + GCS, (1 << 5)),
/* TCO timer halt */
REG_IO_OR16(ACPI_BASE_ADDRESS + TCO1_CNT, TCO_TMR_HLT),
/* Enable upper 128 bytes of CMOS */
REG_MMIO_OR32(RCBA_BASE_ADDRESS + RC, (1 << 2)),
/* Disable unused device (always) */
REG_MMIO_OR32(RCBA_BASE_ADDRESS + FD, PCH_DISABLE_ALWAYS),
REG_SCRIPT_END
};
const struct reg_script pch_interrupt_init_script[] = {
/*
* GFX INTA -> PIRQA (MSI)
* D28IP_P1IP PCIE INTA -> PIRQA
* D29IP_E1P EHCI INTA -> PIRQD
* D20IP_XHCI XHCI INTA -> PIRQC (MSI)
* D31IP_SIP SATA INTA -> PIRQF (MSI)
* D31IP_SMIP SMBUS INTB -> PIRQG
* D31IP_TTIP THRT INTC -> PIRQA
* D27IP_ZIP HDA INTA -> PIRQG (MSI)
*/
/* Device interrupt pin register (board specific) */
REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D31IP,
(INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) |
(INTB << D31IP_SMIP) | (INTA << D31IP_SIP)),
REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D29IP, (INTA << D29IP_E1P)),
REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D28IP,
(INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) |
(INTB << D28IP_P4IP)),
REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D27IP, (INTA << D27IP_ZIP)),
REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D26IP, (INTA << D26IP_E2P)),
REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D22IP, (NOINT << D22IP_MEI1IP)),
REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D20IP, (INTA << D20IP_XHCI)),
/* Device interrupt route registers */
REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D31IR, /* LPC */
DIR_ROUTE(PIRQG, PIRQC, PIRQB, PIRQA)),
REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D29IR, /* EHCI */
DIR_ROUTE(PIRQD, PIRQD, PIRQD, PIRQD)),
REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D28IR, /* PCIE */
DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)),
REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D27IR, /* HDA */
DIR_ROUTE(PIRQG, PIRQG, PIRQG, PIRQG)),
REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D22IR, /* ME */
DIR_ROUTE(PIRQA, PIRQA, PIRQA, PIRQA)),
REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D21IR, /* SIO */
DIR_ROUTE(PIRQE, PIRQF, PIRQF, PIRQF)),
REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D20IR, /* XHCI */
DIR_ROUTE(PIRQC, PIRQC, PIRQC, PIRQC)),
REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D23IR, /* SDIO */
DIR_ROUTE(PIRQH, PIRQH, PIRQH, PIRQH)),
REG_SCRIPT_END
};
static void pch_enable_lpc(void)
{
/* Lookup device tree in romstage */
const struct device *dev;
const config_t *config;
dev = dev_find_slot(0, PCI_DEVFN(PCH_DEV_SLOT_LPC, 0));
if (!dev || !dev->chip_info)
return;
config = dev->chip_info;
pci_write_config32(PCH_DEV_LPC, LPC_GEN1_DEC, config->gen1_dec);
pci_write_config32(PCH_DEV_LPC, LPC_GEN2_DEC, config->gen2_dec);
pci_write_config32(PCH_DEV_LPC, LPC_GEN3_DEC, config->gen3_dec);
pci_write_config32(PCH_DEV_LPC, LPC_GEN4_DEC, config->gen4_dec);
}
void pch_early_init(void)
{
reg_script_run_on_dev(PCH_DEV_LPC, pch_early_init_script);
reg_script_run_on_dev(PCH_DEV_LPC, pch_interrupt_init_script);
pch_enable_lpc();
enable_smbus();
/* 8.14 Additional PCI Express Programming Steps, step #1 */
pci_update_config32(_PCH_DEV(PCIE, 0), 0xf4, ~0x60, 0);
pci_update_config32(_PCH_DEV(PCIE, 0), 0xf4, ~0x80, 0x80);
pci_update_config32(_PCH_DEV(PCIE, 0), 0xe2, ~0x30, 0x30);
}