| # SPDX-License-Identifier: GPL-2.0-only |
| |
| chip soc/intel/skylake |
| # Send an extra VR mailbox command for the PS4 exit issue |
| register "SendVrMbxCmd" = "2" |
| |
| # Power limit |
| register "power_limits_config" = "{ |
| .tdp_pl1_override = 20, |
| .tdp_pl2_override = 30, |
| }" |
| |
| # Enable Enhanced Intel SpeedStep |
| register "eist_enable" = "1" |
| |
| # Serial I/O |
| register "SerialIoDevMode" = "{ |
| [PchSerialIoIndexUart2] = PchSerialIoSkipInit, // LPSS UART |
| }" |
| |
| # Power |
| register "PmConfigSlpS3MinAssert" = "2" # 50ms |
| register "PmConfigSlpS4MinAssert" = "1" # 1s |
| register "PmConfigSlpSusMinAssert" = "3" # 500ms |
| register "PmConfigSlpAMinAssert" = "3" # 2s |
| |
| # FSP Configuration |
| register "SkipExtGfxScan" = "1" |
| register "SaGv" = "SaGv_Enabled" |
| |
| # VR Settings Configuration for 4 Domains |
| #+----------------+-----------+-----------+-------------+----------+ |
| #| Domain/Setting | SA | IA | GT Unsliced | GT | |
| #+----------------+-----------+-----------+-------------+----------+ |
| #| Psi1Threshold | 20A | 20A | 20A | 20A | |
| #| Psi2Threshold | 4A | 5A | 5A | 5A | |
| #| Psi3Threshold | 1A | 1A | 1A | 1A | |
| #| Psi3Enable | 1 | 1 | 1 | 1 | |
| #| Psi4Enable | 1 | 1 | 1 | 1 | |
| #| ImonSlope | 0 | 0 | 0 | 0 | |
| #| ImonOffset | 0 | 0 | 0 | 0 | |
| #| IccMax | 5A | 64A | 31A | 31A | |
| #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | |
| #+----------------+-----------+-----------+-------------+----------+ |
| register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ |
| .vr_config_enable = 1, |
| .psi1threshold = VR_CFG_AMP(20), |
| .psi2threshold = VR_CFG_AMP(4), |
| .psi3threshold = VR_CFG_AMP(1), |
| .psi3enable = 0, |
| .psi4enable = 0, |
| .imon_slope = 0x0, |
| .imon_offset = 0x0, |
| .icc_max = VR_CFG_AMP(5), |
| .voltage_limit = 1520, |
| .ac_loadline = 1030, |
| .dc_loadline = 1030, |
| }" |
| |
| register "domain_vr_config[VR_IA_CORE]" = "{ |
| .vr_config_enable = 1, |
| .psi1threshold = VR_CFG_AMP(20), |
| .psi2threshold = VR_CFG_AMP(5), |
| .psi3threshold = VR_CFG_AMP(1), |
| .psi3enable = 0, |
| .psi4enable = 0, |
| .imon_slope = 0x0, |
| .imon_offset = 0x0, |
| .icc_max = VR_CFG_AMP(64), |
| .voltage_limit = 1520, |
| .ac_loadline = 240, |
| .dc_loadline = 240, |
| }" |
| |
| register "domain_vr_config[VR_GT_UNSLICED]" = "{ |
| .vr_config_enable = 1, |
| .psi1threshold = VR_CFG_AMP(20), |
| .psi2threshold = VR_CFG_AMP(5), |
| .psi3threshold = VR_CFG_AMP(1), |
| .psi3enable = 0, |
| .psi4enable = 0, |
| .imon_slope = 0x0, |
| .imon_offset = 0x0, |
| .icc_max = VR_CFG_AMP(31), |
| .voltage_limit = 1520, |
| .ac_loadline = 310, |
| .dc_loadline = 310, |
| }" |
| |
| register "domain_vr_config[VR_GT_SLICED]" = "{ |
| .vr_config_enable = 1, |
| .psi1threshold = VR_CFG_AMP(20), |
| .psi2threshold = VR_CFG_AMP(5), |
| .psi3threshold = VR_CFG_AMP(1), |
| .psi3enable = 0, |
| .psi4enable = 0, |
| .imon_slope = 0x0, |
| .imon_offset = 0x0, |
| .icc_max = VR_CFG_AMP(31), |
| .voltage_limit = 1520, |
| .ac_loadline = 310, |
| .dc_loadline = 310, |
| }" |
| |
| device domain 0 on |
| device ref system_agent on end |
| device ref igpu on end |
| device ref sa_thermal on end |
| device ref south_xhci on |
| register "usb2_ports" = "{ |
| [0] = USB2_PORT_MID(OC_SKIP), /* Type-A port right */ |
| [1] = USB2_PORT_FLEX(OC_SKIP), /* 3G / LTE */ |
| [2] = USB2_PORT_TYPE_C(OC_SKIP), /* Type-C port right */ |
| [3] = USB2_PORT_FLEX(OC_SKIP), /* Camera */ |
| [4] = USB2_PORT_FLEX(OC_SKIP), /* Bluetooth */ |
| [6] = USB2_PORT_FLEX(OC_SKIP), /* Type-A port left */ |
| [7] = USB2_PORT_TYPE_C(OC_SKIP), /* Type-C port right */ |
| }" |
| register "usb3_ports" = "{ |
| [0] = USB3_PORT_DEFAULT(OC_SKIP), /* Type-A port right */ |
| [1] = USB3_PORT_DEFAULT(OC_SKIP), /* 4G */ |
| [2] = USB3_PORT_DEFAULT(OC_SKIP), /* Type C port right */ |
| [3] = USB3_PORT_DEFAULT(OC_SKIP), /* Type-A port left */ |
| }" |
| end |
| device ref thermal on end |
| device ref sata on |
| register "SataSpeedLimit" = "2" |
| register "SataPortsEnable" = "{ |
| [0] = 1, |
| [2] = 1, |
| }" |
| end |
| device ref pcie_rp1 on |
| # Root port #1 x4 (TBT) |
| register "PcieRpEnable[0]" = "1" |
| register "PcieRpClkReqSupport[0]" = "1" |
| register "PcieRpClkReqNumber[0]" = "4" |
| register "PcieRpClkSrcNumber[0]" = "4" |
| register "PcieRpAdvancedErrorReporting[0]" = "1" |
| register "PcieRpLtrEnable[0]" = "1" |
| register "PcieRpHotPlug[0]" = "1" |
| end |
| device ref pcie_rp5 on |
| # Root port #5 x1 (LAN) |
| register "PcieRpEnable[4]" = "1" |
| register "PcieRpClkReqSupport[4]" = "1" |
| register "PcieRpClkReqNumber[4]" = "3" |
| register "PcieRpClkSrcNumber[4]" = "3" |
| register "PcieRpAdvancedErrorReporting[4]" = "1" |
| register "PcieRpLtrEnable[4]" = "1" |
| end |
| device ref pcie_rp6 on |
| # Root port #6 x1 (WLAN) |
| register "PcieRpEnable[5]" = "1" |
| register "PcieRpClkReqSupport[5]" = "1" |
| register "PcieRpClkReqNumber[5]" = "2" |
| register "PcieRpClkSrcNumber[5]" = "2" |
| register "PcieRpAdvancedErrorReporting[5]" = "1" |
| register "PcieRpLtrEnable[5]" = "1" |
| end |
| device ref pcie_rp9 on |
| # Root port #9 x4 (NVMe) |
| register "PcieRpEnable[8]" = "1" |
| register "PcieRpClkReqSupport[8]" = "1" |
| register "PcieRpClkReqNumber[8]" = "5" |
| register "PcieRpClkSrcNumber[8]" = "5" |
| register "PcieRpAdvancedErrorReporting[8]" = "1" |
| register "PcieRpLtrEnable[8]" = "1" |
| end |
| device ref lpc_espi on |
| register "serirq_mode" = "SERIRQ_CONTINUOUS" |
| |
| register "gen1_dec" = "0x000c0681" |
| register "gen2_dec" = "0x000c1641" |
| register "gen3_dec" = "0x00040069" |
| chip drivers/pc80/tpm |
| device pnp 0c31.0 on end |
| end |
| end |
| device ref p2sb off end |
| device ref pmc on |
| register "gpe0_dw0" = "GPP_C" |
| register "gpe0_dw1" = "GPP_D" |
| register "gpe0_dw2" = "GPP_E" |
| end |
| device ref hda on end |
| device ref smbus on end |
| device ref fast_spi on end |
| end |
| end |