| chip northbridge/intel/gm45 |
| # IGD Displays |
| register "gfx.ndid" = "3" |
| register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }" |
| |
| register "gfx.use_spread_spectrum_clock" = "1" |
| register "gfx.lvds_dual_channel" = "0" |
| register "gfx.link_frequency_270_mhz" = "1" |
| register "gfx.lvds_num_lanes" = "4" |
| |
| device cpu_cluster 0 on |
| chip cpu/intel/socket_BGA956 |
| device lapic 0 on end |
| end |
| chip cpu/intel/model_1067x |
| # Magic APIC ID to locate this chip |
| device lapic 0xACAC off end |
| |
| # Enable Super LFM |
| register "slfm" = "1" |
| |
| # Enable C5, C6 |
| register "c5" = "1" |
| register "c6" = "1" |
| end |
| end |
| |
| device domain 0 on |
| device pci 00.0 on |
| subsystemid 0x17aa 0x20e0 |
| end # host bridge |
| device pci 02.0 on # VGA |
| subsystemid 0x17aa 0x20e4 |
| ioapic_irq 2 INTA 0x10 |
| end |
| device pci 02.1 on |
| subsystemid 0x17aa 0x20e4 |
| end # Display |
| device pci 03.0 on |
| subsystemid 0x17aa 0x20e6 |
| end # ME |
| device pci 03.1 off end # ME |
| device pci 03.2 off end # ME |
| device pci 03.3 off end # ME |
| chip southbridge/intel/i82801ix |
| register "pirqa_routing" = "0x0b" |
| register "pirqb_routing" = "0x0b" |
| register "pirqc_routing" = "0x0b" |
| register "pirqd_routing" = "0x0b" |
| register "pirqe_routing" = "0x80" |
| register "pirqf_routing" = "0x80" |
| register "pirqg_routing" = "0x80" |
| register "pirqh_routing" = "0x80" |
| |
| register "gpi8_routing" = "2" |
| register "gpe0_en" = "0x01000000" |
| register "gpi1_routing" = "2" |
| |
| # Set AHCI mode, enable ports 1 and 2. |
| register "sata_port_map" = "0x03" |
| register "sata_clock_request" = "0" |
| register "sata_traffic_monitor" = "0" |
| |
| # Set c-state support |
| register "c4onc3_enable" = "0" |
| register "c5_enable" = "1" |
| register "c6_enable" = "1" |
| |
| # Set thermal throttling to 75%. |
| register "throttle_duty" = "THTL_75_0" |
| |
| # Enable PCIe ports 1,2,4 as slots (Mini * PCIe). |
| register "pcie_slot_implemented" = "0xb" |
| # Set power limits to 10 * 10^0 watts. |
| # Maybe we should set less for Mini PCIe. |
| register "pcie_power_limits" = "{ { 10, 0 }, { 10, 0 }, { 0, 0 }, { 10, 0 }, { 0, 0 }, { 0, 0 } }" |
| register "pcie_hotplug_map" = "{ 0, 0, 0, 1, 0, 0, 0, 0 }" |
| |
| chip drivers/generic/ioapic |
| register "have_isa_interrupts" = "1" |
| register "irq_on_fsb" = "1" |
| register "enable_virtual_wire" = "1" |
| register "base" = "(void *)0xfec00000" |
| device ioapic 2 on end |
| end |
| |
| device pci 19.0 on end # LAN |
| device pci 1a.0 on # UHCI |
| subsystemid 0x17aa 0x20f0 |
| ioapic_irq 2 INTA 0x10 |
| end |
| device pci 1a.1 on # UHCI |
| subsystemid 0x17aa 0x20f0 |
| ioapic_irq 2 INTB 0x11 |
| end |
| device pci 1a.2 on # UHCI |
| subsystemid 0x17aa 0x20f0 |
| ioapic_irq 2 INTC 0x12 |
| end |
| device pci 1a.7 on # EHCI |
| subsystemid 0x17aa 0x20f1 |
| ioapic_irq 2 INTC 0x12 |
| end |
| device pci 1b.0 on # HD Audio |
| subsystemid 0x17aa 0x20f2 |
| ioapic_irq 2 INTA 0x10 |
| end |
| device pci 1c.0 on # PCIe Port #1 |
| subsystemid 0x17aa 0x20f3 # WWAN |
| ioapic_irq 2 INTA 0x10 |
| end |
| device pci 1c.1 on |
| subsystemid 0x17aa 0x20f3 # WLAN |
| end # PCIe Port #2 |
| device pci 1c.2 on |
| subsystemid 0x17aa 0x20f3 # UWB |
| end # PCIe Port #3 |
| device pci 1c.3 on |
| subsystemid 0x17aa 0x20f3 # Expresscard |
| end # PCIe Port #4 |
| device pci 1c.4 off end # PCIe Port #5 |
| device pci 1c.5 off end # PCIe Port #6 |
| device pci 1d.0 on # UHCI |
| subsystemid 0x17aa 0x20f0 |
| ioapic_irq 2 INTA 0x10 |
| end |
| device pci 1d.1 on # UHCI |
| subsystemid 0x17aa 0x20f0 |
| ioapic_irq 2 INTB 0x11 |
| end |
| device pci 1d.2 on # UHCI |
| subsystemid 0x17aa 0x20f0 |
| ioapic_irq 2 INTC 0x12 |
| end |
| device pci 1d.7 on # EHCI |
| subsystemid 0x17aa 0x20f1 |
| ioapic_irq 2 INTA 0x10 |
| end |
| device pci 1e.0 on # PCI |
| subsystemid 0x17aa 0x20f4 |
| end |
| device pci 1f.0 on # LPC bridge |
| subsystemid 0x17aa 0x20f5 |
| chip ec/lenovo/pmh7 |
| device pnp ff.1 on # dummy |
| end |
| register "backlight_enable" = "0x01" |
| register "dock_event_enable" = "0x01" |
| end |
| |
| chip ec/lenovo/h8 |
| device pnp ff.2 on # dummy |
| io 0x60 = 0x62 |
| io 0x62 = 0x66 |
| io 0x64 = 0x1600 |
| io 0x66 = 0x1604 |
| end |
| |
| register "config0" = "0xa6" |
| register "config1" = "0x04" |
| register "config2" = "0xa0" |
| register "config3" = "0x01" |
| |
| register "beepmask0" = "0xfe" |
| register "beepmask1" = "0x96" |
| register "has_power_management_beeps" = "1" |
| register "has_uwb" = "1" |
| |
| register "event2_enable" = "0xff" |
| register "event3_enable" = "0xff" |
| register "event4_enable" = "0xf4" |
| register "event5_enable" = "0x3c" |
| register "event6_enable" = "0x80" |
| register "event7_enable" = "0x01" |
| register "event8_enable" = "0x01" |
| register "event9_enable" = "0xff" |
| register "eventa_enable" = "0xff" |
| register "eventb_enable" = "0xff" |
| register "eventc_enable" = "0xff" |
| register "eventd_enable" = "0xff" |
| end |
| |
| chip superio/nsc/pc87382 |
| device pnp 164e.3 on # Digitizer |
| io 0x60 = 0x200 |
| irq 0x29 = 0xb0 |
| irq 0x70 = 0x5 |
| irq 0xf0 = 0x82 |
| end |
| # IR, not connected |
| device pnp 164e.2 off end |
| # GPIO, not connected |
| device pnp 164e.7 off end |
| # DLPC, not connected |
| device pnp 164e.19 off end |
| end |
| |
| end |
| device pci 1f.2 on # SATA/IDE 1 |
| subsystemid 0x17aa 0x20f8 |
| ioapic_irq 2 INTB 0x11 |
| end |
| device pci 1f.3 on # SMBus |
| subsystemid 0x17aa 0x20f9 |
| ioapic_irq 2 INTC 0x12 |
| # eeprom, 8 virtual devices, same chip |
| chip drivers/i2c/at24rf08c |
| device i2c 54 on end |
| device i2c 55 on end |
| device i2c 56 on end |
| device i2c 57 on end |
| device i2c 5c on end |
| device i2c 5d on end |
| device i2c 5e on end |
| device i2c 5f on end |
| end |
| end |
| device pci 1f.5 off end # SATA/IDE 2 |
| device pci 1f.6 off end # Thermal |
| end |
| end |
| end |