| ## SPDX-License-Identifier: GPL-2.0-only |
| |
| # set up payload config and version files for later inclusion |
| ifeq ($(CONFIG_PAYLOAD_BUILD_SEABIOS),y) |
| PAYLOAD_CONFIG=payloads/external/SeaBIOS/seabios/.config |
| PAYLOAD_VERSION=payloads/external/SeaBIOS/seabios/out/autoversion.h |
| endif |
| ifeq ($(CONFIG_PAYLOAD_FILO),y) |
| PAYLOAD_CONFIG=payloads/external/FILO/filo/.config |
| PAYLOAD_VERSION=payloads/external/FILO/filo/build/version.h |
| endif |
| ifeq ($(CONFIG_PAYLOAD_DEPTHCHARGE),y) |
| PAYLOAD_CONFIG=payloads/external/depthcharge/depthcharge/.config |
| $(PAYLOAD_CONFIG): payloads/external/depthcharge/depthcharge/build/depthcharge.elf |
| ifeq ($(call strip_quotes,$(CONFIG_MAINBOARD_DEPTHCHARGE)),) |
| BOARD=$(call ws_to_under,$(call strip_quotes,$(call tolower,$(CONFIG_MAINBOARD_PART_NUMBER)))) |
| else |
| BOARD=$(CONFIG_MAINBOARD_DEPTHCHARGE) |
| endif |
| #TODO: Figure out version |
| endif |
| |
| ifeq ($(CONFIG_PAYLOAD_LINUX)$(CONFIG_PAYLOAD_LINUXBOOT),y) |
| ifneq ($(strip $(call strip_quotes,$(CONFIG_LINUX_COMMAND_LINE))),) |
| ADDITIONAL_PAYLOAD_CONFIG+=-C $(CONFIG_LINUX_COMMAND_LINE) |
| endif |
| ifneq ($(strip $(call strip_quotes,$(CONFIG_LINUX_INITRD))),) |
| ifneq ($(CONFIG_LINUXBOOT_ARM64),y) |
| ADDITIONAL_PAYLOAD_CONFIG+=-I $(CONFIG_LINUX_INITRD)$(CONFIG_LINUXBOOT_INITRAMFS_SUFFIX) |
| prebuilt-files += $(strip $(call strip_quotes,$(CONFIG_LINUX_INITRD))) |
| endif |
| endif |
| endif |
| ifneq ($(strip $(call strip_quotes,$(CONFIG_PAYLOAD_OPTIONS))),) |
| ADDITIONAL_PAYLOAD_CONFIG+=$(strip $(call strip_quotes,$(CONFIG_PAYLOAD_OPTIONS))) |
| endif |
| |
| cbfs-files-y += $(CONFIG_CBFS_PREFIX)/payload |
| $(CONFIG_CBFS_PREFIX)/payload-file := $(CONFIG_PAYLOAD_FILE) |
| ifeq ($(CONFIG_PAYLOAD_IS_FLAT_BINARY),y) |
| $(CONFIG_CBFS_PREFIX)/payload-type := flat-binary |
| else |
| $(CONFIG_CBFS_PREFIX)/payload-type := payload |
| endif |
| $(CONFIG_CBFS_PREFIX)/payload-compression := $(CBFS_PAYLOAD_COMPRESS_FLAG) |
| $(CONFIG_CBFS_PREFIX)/payload-options := $(ADDITIONAL_PAYLOAD_CONFIG) |
| |
| cbfs-files-$(CONFIG_INCLUDE_CONFIG_FILE) += payload_config |
| payload_config-file := $(PAYLOAD_CONFIG) |
| payload_config-type := raw |
| |
| cbfs-files-$(CONFIG_INCLUDE_CONFIG_FILE) += payload_revision |
| payload_revision-file := $(PAYLOAD_VERSION) |
| payload_revision-type := raw |
| |
| cbfs-files-$(CONFIG_GRUB2_INCLUDE_RUNTIME_CONFIG_FILE) += etc/grub.cfg |
| etc/grub.cfg-file := $(CONFIG_GRUB2_RUNTIME_CONFIG_FILE) |
| etc/grub.cfg-type := raw |
| etc/grub.cfg-required := the GRUB runtime configuration file ($(CONFIG_GRUB2_RUNTIME_CONFIG_FILE)) |
| |
| # SeaBIOS |
| |
| SEABIOS_CC_OFFSET=$(if $(filter %ccache,$(HOSTCC)),2,1) |
| SEABIOS_TARGET_PATH=payloads/external/SeaBIOS/seabios/out/bios.bin.elf |
| $(SEABIOS_TARGET_PATH): $(DOTCONFIG) |
| $(MAKE) -C payloads/external/SeaBIOS \ |
| HOSTCC="$(HOSTCC)" \ |
| CC=$(word $(SEABIOS_CC_OFFSET),$(CC_x86_32)) \ |
| CFLAGS="$(patsubst $(word $(SEABIOS_CC_OFFSET),$(CC_x86_32))%,,$(wordlist $(SEABIOS_CC_OFFSET),9999,$(CC_x86_32)))" \ |
| LD=$(word 1,$(LD_x86_32)) LDFLAGS="$(patsubst $(word 1,$(LD_x86_32))%,,$(LD_x86_32))" \ |
| OBJDUMP="$(OBJDUMP_x86_32)" \ |
| OBJCOPY="$(OBJCOPY_x86_32)" STRIP="$(STRIP_x86_32)" \ |
| AS="$(AS_x86_32)" IASL="$(IASL)" \ |
| CONFIG_SEABIOS_MASTER=$(CONFIG_SEABIOS_MASTER) \ |
| CONFIG_SEABIOS_STABLE=$(CONFIG_SEABIOS_STABLE) \ |
| CONFIG_SEABIOS_REVISION=$(CONFIG_SEABIOS_REVISION) \ |
| CONFIG_SEABIOS_REVISION_ID=$(CONFIG_SEABIOS_REVISION_ID) \ |
| CONFIG_PAYLOAD_CONFIGFILE=$(CONFIG_PAYLOAD_CONFIGFILE) \ |
| CONFIG_SEABIOS_THREAD_OPTIONROMS=$(CONFIG_SEABIOS_THREAD_OPTIONROMS) \ |
| CONFIG_SEABIOS_VGA_COREBOOT=$(CONFIG_SEABIOS_VGA_COREBOOT) \ |
| CONFIG_DRIVERS_UART_8250IO=$(CONFIG_DRIVERS_UART_8250IO) \ |
| CONFIG_DRIVERS_UART_8250MEM=$(CONFIG_DRIVERS_UART_8250MEM) \ |
| CONFIG_HUDSON_UART=$(CONFIG_HUDSON_UART) \ |
| CONFIG_CONSOLE_SERIAL=$(CONFIG_CONSOLE_SERIAL) \ |
| CONFIG_TTYS0_BASE=$(CONFIG_TTYS0_BASE) \ |
| CONFIG_SEABIOS_DEBUG_LEVEL=$(CONFIG_SEABIOS_DEBUG_LEVEL) \ |
| CONFIG_DRIVERS_UART_8250MEM_32=$(CONFIG_DRIVERS_UART_8250MEM_32) \ |
| CONFIG_ENABLE_HSUART=$(CONFIG_ENABLE_HSUART) \ |
| CONFIG_CONSOLE_UART_BASE_ADDRESS=$(CONFIG_CONSOLE_UART_BASE_ADDRESS) \ |
| CONFIG_SEABIOS_HARDWARE_IRQ=$(CONFIG_SEABIOS_HARDWARE_IRQ) |
| |
| payloads/external/SeaBIOS/seabios/out/vgabios.bin: $(SEABIOS_TARGET_PATH) |
| payloads/external/SeaBIOS/seabios/.config: $(SEABIOS_TARGET_PATH) |
| payloads/external/SeaBIOS/seabios/out/autoversion.h: $(SEABIOS_TARGET_PATH) |
| |
| cbfs-files-$(CONFIG_SEABIOS_SECONDARY_PAYLOAD) += img/seabios |
| img/seabios-file := $(SEABIOS_TARGET_PATH) |
| img/seabios-type := payload |
| img/seabios-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG) |
| |
| # add a SeaBIOS bootorder file |
| ifneq ($(strip $(CONFIG_SEABIOS_BOOTORDER_FILE)),) |
| cbfs-files-y += bootorder |
| bootorder-file := $(strip $(CONFIG_SEABIOS_BOOTORDER_FILE)) |
| bootorder-type := raw |
| endif |
| |
| ifneq ($(CONFIG_SEABIOS_PS2_TIMEOUT),) |
| ifneq ($(CONFIG_SEABIOS_PS2_TIMEOUT),0) |
| $(call add_intermediate, seabios_ps2_timeout, $(CBFSTOOL)) |
| @printf " SeaBIOS Wait up to $(CONFIG_SEABIOS_PS2_TIMEOUT) ms for PS/2 keyboard controller initialization\n" |
| $(if $(CONFIG_UPDATE_IMAGE),-$(CBFSTOOL) $< remove -n etc/ps2-keyboard-spinup 2>/dev/null) |
| $(CBFSTOOL) $< add-int -i $(CONFIG_SEABIOS_PS2_TIMEOUT) -n etc/ps2-keyboard-spinup |
| endif |
| endif |
| |
| ifeq ($(CONFIG_SEABIOS_ADD_SERCON_PORT_FILE),y) |
| $(call add_intermediate, seabios_sercon, $(CBFSTOOL)) |
| @printf " SeaBIOS Add sercon-port file\n" |
| $(if $(CONFIG_UPDATE_IMAGE),-$(CBFSTOOL) $< remove -n etc/sercon-port 2>/dev/null) |
| $(CBFSTOOL) $< add-int -i $(CONFIG_SEABIOS_SERCON_PORT_ADDR) -n etc/sercon-port |
| endif |
| |
| ifeq ($(CONFIG_SEABIOS_THREAD_OPTIONROMS),y) |
| $(call add_intermediate, seabios_thread_optionroms, $(CBFSTOOL)) |
| @printf " SeaBIOS Thread optionroms\n" |
| $(if $(CONFIG_UPDATE_IMAGE),-$(CBFSTOOL) $< remove -n etc/threads 2>/dev/null) |
| $(CBFSTOOL) $< add-int -i 2 -n etc/threads |
| endif |
| |
| ifeq ($(CONFIG_PAYLOAD_SEAGRUB),y) |
| ifneq ($(CONFIG_SEAGRUB_ALLOW_SEABIOS_BOOTMENU),y) |
| $(call add_intermediate, seabios_bootmenu, $(CBFSTOOL)) |
| @printf " SeaBIOS Disable boot menu\n" |
| $(if $(CONFIG_UPDATE_IMAGE),-$(CBFSTOOL) $< remove -n etc/show-boot-menu 2>/dev/null) |
| $(CBFSTOOL) $< add-int -i 0 -n etc/show-boot-menu |
| else |
| $(call add_intermediate, seabios_bootmenu, $(CBFSTOOL)) |
| $(if $(CONFIG_UPDATE_IMAGE),-$(CBFSTOOL) $< remove -n etc/show-boot-menu 2>/dev/null) |
| endif |
| endif |
| |
| # Depthcharge |
| |
| payloads/external/depthcharge/depthcharge/build/depthcharge.elf depthcharge: $(DOTCONFIG) $(CBFSTOOL) |
| $(MAKE) -C payloads/external/depthcharge \ |
| BOARD=$(BOARD) \ |
| MFLAGS= MAKEFLAGS= \ |
| DEPTHCHARGE_MASTER=$(CONFIG_DEPTHCHARGE_MASTER) \ |
| DEPTHCHARGE_STABLE=$(CONFIG_DEPTHCHARGE_STABLE) \ |
| DEPTHCHARGE_REVISION=$(CONFIG_DEPTHCHARGE_REVISION) \ |
| DEPTHCHARGE_REVISION_ID=$(CONFIG_DEPTHCHARGE_REVISION_ID) \ |
| OVERRIDE_DEFCONFIG=$(CONFIG_LP_DEFCONFIG_OVERRIDE) |
| |
| # edk2 |
| |
| $(obj)/UEFIPAYLOAD.fd: $(DOTCONFIG) |
| $(MAKE) -C payloads/external/edk2 UefiPayloadPkg \ |
| HOSTCC="$(HOSTCC)" \ |
| CC="$(HOSTCC)" \ |
| CONFIG_EDK2_REPOSITORY=$(CONFIG_EDK2_REPOSITORY) \ |
| CONFIG_EDK2_TAG_OR_REV=$(CONFIG_EDK2_TAG_OR_REV) \ |
| CONFIG_EDK2_UEFIPAYLOAD=$(CONFIG_EDK2_UEFIPAYLOAD) \ |
| CONFIG_EDK2_REPO_OFFICIAL=$(CONFIG_EDK2_REPO_OFFICIAL) \ |
| CONFIG_EDK2_REPO_MRCHROMEBOX=$(CONFIG_EDK2_REPO_MRCHROMEBOX) \ |
| CONFIG_EDK2_REPO_CUSTOM=$(CONFIG_EDK2_REPO_CUSTOM) \ |
| CONFIG_EDK2_CPU_TIMER_LIB=$(CONFIG_EDK2_CPU_TIMER_LIB) \ |
| CONFIG_EDK2_CUSTOM_BUILD_PARAMS=$(CONFIG_EDK2_CUSTOM_BUILD_PARAMS) \ |
| CONFIG_EDK2_USE_EDK2_PLATFORMS=$(CONFIG_EDK2_USE_EDK2_PLATFORMS) \ |
| CONFIG_EDK2_PLATFORMS_REPOSITORY=$(CONFIG_EDK2_PLATFORMS_REPOSITORY) \ |
| CONFIG_EDK2_PLATFORMS_TAG_OR_REV=$(CONFIG_EDK2_PLATFORMS_TAG_OR_REV) \ |
| CONFIG_EDK2_DEBUG=$(CONFIG_EDK2_DEBUG) \ |
| CONFIG_EDK2_RELEASE=$(CONFIG_EDK2_RELEASE) \ |
| CONFIG_EDK2_BOOTSPLASH_FILE=$(CONFIG_EDK2_BOOTSPLASH_FILE) \ |
| CONFIG_EDK2_BOOT_MANAGER_ESCAPE=$(CONFIG_EDK2_BOOT_MANAGER_ESCAPE) \ |
| CONFIG_EDK2_BOOT_TIMEOUT=$(CONFIG_EDK2_BOOT_TIMEOUT) \ |
| CONFIG_EDK2_CBMEM_LOGGING=$(CONFIG_EDK2_CBMEM_LOGGING) \ |
| CONFIG_EDK2_FOLLOW_BGRT_SPEC=$(CONFIG_EDK2_FOLLOW_BGRT_SPEC) \ |
| CONFIG_EDK2_FULL_SCREEN_SETUP=$(CONFIG_EDK2_FULL_SCREEN_SETUP) \ |
| CONFIG_EDK2_HAVE_EFI_SHELL=$(CONFIG_EDK2_HAVE_EFI_SHELL) \ |
| CONFIG_EDK2_PRIORITIZE_INTERNAL=$(CONFIG_EDK2_PRIORITIZE_INTERNAL) \ |
| CONFIG_EDK2_PS2_SUPPORT=$(CONFIG_EDK2_PS2_SUPPORT) \ |
| CONFIG_EDK2_SERIAL_SUPPORT=$(CONFIG_EDK2_SERIAL_SUPPORT) \ |
| CONFIG_EDK2_SD_MMC_TIMEOUT=$(CONFIG_EDK2_SD_MMC_TIMEOUT) \ |
| CONFIG_ECAM_MMCONF_BASE_ADDRESS=$(CONFIG_ECAM_MMCONF_BASE_ADDRESS) \ |
| CONFIG_ECAM_MMCONF_LENGTH=$(CONFIG_ECAM_MMCONF_LENGTH) \ |
| CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS=$(CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS) \ |
| CONFIG_CPU_XTAL_HZ=$(CONFIG_CPU_XTAL_HZ) \ |
| CONFIG_SMMSTORE_V2=$(CONFIG_SMMSTORE_v2) \ |
| CONFIG_EDK2_SECURE_BOOT_SUPPORT=$(CONFIG_EDK2_SECURE_BOOT_SUPPORT) \ |
| GCC_CC_x86_32=$(GCC_CC_x86_32) \ |
| GCC_CC_x86_64=$(GCC_CC_x86_64) \ |
| GCC_CC_arm=$(GCC_CC_arm) \ |
| GCC_CC_arm64=$(GCC_CC_arm64) \ |
| OBJCOPY_x86_32=$(OBJCOPY_x86_32) \ |
| OBJCOPY_x86_64=$(OBJCOPY_x86_64) \ |
| OBJCOPY_arm=$(OBJCOPY_arm) \ |
| OBJCOPY_arm64=$(OBJCOPY_arm64) \ |
| MFLAGS= MAKEFLAGS= |
| |
| $(obj)/ShimmedUniversalPayload.elf: $(DOTCONFIG) |
| $(MAKE) -C payloads/external/edk2 UniversalPayload \ |
| HOSTCC="$(HOSTCC)" \ |
| CC="$(HOSTCC)" \ |
| CONFIG_EDK2_REPOSITORY=$(CONFIG_EDK2_REPOSITORY) \ |
| CONFIG_EDK2_TAG_OR_REV=$(CONFIG_EDK2_TAG_OR_REV) \ |
| CONFIG_EDK2_UEFIPAYLOAD=$(CONFIG_EDK2_UEFIPAYLOAD) \ |
| CONFIG_EDK2_REPO_OFFICIAL=$(CONFIG_EDK2_REPO_OFFICIAL) \ |
| CONFIG_EDK2_REPO_MRCHROMEBOX=$(CONFIG_EDK2_REPO_MRCHROMEBOX) \ |
| CONFIG_EDK2_REPO_CUSTOM=$(CONFIG_EDK2_REPO_CUSTOM) \ |
| CONFIG_EDK2_CPU_TIMER_LIB=$(CONFIG_EDK2_CPU_TIMER_LIB) \ |
| CONFIG_EDK2_CUSTOM_BUILD_PARAMS=$(CONFIG_EDK2_CUSTOM_BUILD_PARAMS) \ |
| CONFIG_EDK2_DEBUG=$(CONFIG_EDK2_DEBUG) \ |
| CONFIG_EDK2_RELEASE=$(CONFIG_EDK2_RELEASE) \ |
| CONFIG_EDK2_BOOTSPLASH_FILE=$(CONFIG_EDK2_BOOTSPLASH_FILE) \ |
| CONFIG_EDK2_BOOT_MANAGER_ESCAPE=$(CONFIG_EDK2_BOOT_MANAGER_ESCAPE) \ |
| CONFIG_EDK2_BOOT_TIMEOUT=$(CONFIG_EDK2_BOOT_TIMEOUT) \ |
| CONFIG_EDK2_CBMEM_LOGGING=$(CONFIG_EDK2_CBMEM_LOGGING) \ |
| CONFIG_EDK2_FOLLOW_BGRT_SPEC=$(CONFIG_EDK2_FOLLOW_BGRT_SPEC) \ |
| CONFIG_EDK2_FULL_SCREEN_SETUP=$(CONFIG_EDK2_FULL_SCREEN_SETUP) \ |
| CONFIG_EDK2_HAVE_EFI_SHELL=$(CONFIG_EDK2_HAVE_EFI_SHELL) \ |
| CONFIG_EDK2_PRIORITIZE_INTERNAL=$(CONFIG_EDK2_PRIORITIZE_INTERNAL) \ |
| CONFIG_EDK2_PS2_SUPPORT=$(CONFIG_EDK2_PS2_SUPPORT) \ |
| CONFIG_EDK2_SERIAL_SUPPORT=$(CONFIG_EDK2_SERIAL_SUPPORT) \ |
| CONFIG_EDK2_SD_MMC_TIMEOUT=$(CONFIG_EDK2_SD_MMC_TIMEOUT) \ |
| CONFIG_EDK2_UNIVERSAL_PAYLOAD=$(CONFIG_EDK2_UNIVERSAL_PAYLOAD) \ |
| CONFIG_ECAM_MMCONF_BASE_ADDRESS=$(CONFIG_ECAM_MMCONF_BASE_ADDRESS) \ |
| CONFIG_ECAM_MMCONF_LENGTH=$(CONFIG_ECAM_MMCONF_LENGTH) \ |
| CONFIG_CPU_XTAL_HZ=$(CONFIG_CPU_XTAL_HZ) \ |
| CONFIG_SMMSTORE_V2=$(CONFIG_SMMSTORE_v2) \ |
| GCC_CC_x86_32=$(GCC_CC_x86_32) \ |
| GCC_CC_x86_64=$(GCC_CC_x86_64) \ |
| GCC_CC_arm=$(GCC_CC_arm) \ |
| GCC_CC_arm64=$(GCC_CC_arm64) \ |
| OBJCOPY_x86_32=$(OBJCOPY_x86_32) \ |
| OBJCOPY_x86_64=$(OBJCOPY_x86_64) \ |
| OBJCOPY_arm=$(OBJCOPY_arm) \ |
| OBJCOPY_arm64=$(OBJCOPY_arm64) \ |
| MFLAGS= MAKEFLAGS= |
| |
| # FILO |
| |
| filo: |
| $(MAKE) -C payloads/external/FILO \ |
| HOSTCC="$(HOSTCC)" \ |
| CC="$(CC_x86_32)" LD="$(LD_x86_32)" OBJDUMP="$(OBJDUMP_x86_32)" \ |
| OBJCOPY="$(OBJCOPY_x86_32)" STRIP="$(STRIP_x86_32)" \ |
| CONFIG_FILO_MASTER=$(CONFIG_FILO_MASTER) \ |
| CONFIG_FILO_STABLE=$(CONFIG_FILO_STABLE) \ |
| CONFIG_FILO_USE_AUTOBOOT=$(CONFIG_FILO_USE_AUTOBOOT) \ |
| CONFIG_FILO_AUTOBOOT_FILE=$(CONFIG_FILO_AUTOBOOT_FILE) \ |
| CONFIG_FILO_AUTOBOOT_DELAY=$(CONFIG_FILO_AUTOBOOT_DELAY) |
| |
| payloads/external/FILO/filo/build/filo.elf: filo |
| payloads/external/FILO/filo/.config: filo |
| payloads/external/FILO/filo/build/version.h: filo |
| |
| # Grub |
| |
| GRUB_TARGET_PATH=payloads/external/GRUB2/grub2/build/default_payload.elf |
| |
| cbfs-files-$(CONFIG_GRUB2_SECONDARY_PAYLOAD) += img/grub2 |
| img/grub2-file := $(GRUB_TARGET_PATH) |
| img/grub2-type := payload |
| img/grub2-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG) |
| |
| grub2: $(obj)/config.h |
| $(MAKE) -C payloads/external/GRUB2 \ |
| HOSTCC="$(HOSTCC)" \ |
| CC="$(CC_x86_32)" LD="$(LD_x86_32)" \ |
| OBJCOPY="$(OBJCOPY_x86_32)" STRIP="$(STRIP_x86_32)" \ |
| CONFIG_DEP="$(abspath $(obj)/config.h)" \ |
| CONFIG_GRUB2_STABLE=$(CONFIG_GRUB2_STABLE) \ |
| CONFIG_GRUB2_MASTER=$(CONFIG_GRUB2_MASTER) \ |
| CONFIG_GRUB2_REVISION=$(CONFIG_GRUB2_REVISION) \ |
| CONFIG_GRUB2_REVISION_ID=$(CONFIG_GRUB2_REVISION_ID) \ |
| CONFIG_GRUB2_EXTRA_MODULES=$(CONFIG_GRUB2_EXTRA_MODULES) |
| |
| $(GRUB_TARGET_PATH): grub2 |
| |
| # U-Boot |
| |
| payloads/external/U-Boot/build/u-boot.bin u-boot: $(DOTCONFIG) |
| $(MAKE) -C payloads/external/U-Boot \ |
| STABLE_COMMIT_ID=$(CONFIG_UBOOT_STABLE_COMMIT_ID) \ |
| CONFIG_UBOOT_MASTER=$(CONFIG_UBOOT_MASTER) \ |
| CONFIG_UBOOT_STABLE=$(CONFIG_UBOOT_STABLE) |
| |
| # TINT |
| |
| payloads/external/tint/tint/tint.elf tint: |
| $(MAKE) -C payloads/external/tint |
| |
| cbfs-files-$(CONFIG_TINT_SECONDARY_PAYLOAD) += img/tint |
| img/tint-file := payloads/external/tint/tint/tint.elf |
| img/tint-type := payload |
| img/tint-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG) |
| |
| # Memtest86+ |
| |
| cbfs-files-$(CONFIG_MEMTEST_SECONDARY_PAYLOAD) += img/memtest |
| img/memtest-file := payloads/external/Memtest86Plus/memtest86plus/memtest |
| img/memtest-type := payload |
| img/memtest-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG) |
| |
| ifeq ($(CONFIG_CONSOLE_SERIAL)$(CONFIG_DRIVERS_UART_8250IO),yy) |
| MEMTEST_SERIAL_OPTIONS=SERIAL_CONSOLE_DEFAULT=1 \ |
| SERIAL_TTY=$(CONFIG_UART_FOR_CONSOLE) \ |
| SERIAL_BAUD_RATE=$(CONFIG_TTYS0_BAUD) |
| endif |
| |
| payloads/external/Memtest86Plus/memtest86plus/memtest: $(DOTCONFIG) |
| $(MAKE) -C payloads/external/Memtest86Plus all \ |
| CC="$(CC_x86_32)" \ |
| LD="$(LD_x86_32)" \ |
| OBJCOPY="$(OBJCOPY_x86_32)" \ |
| AS="$(AS_x86_32)" \ |
| CONFIG_MEMTEST_REVISION=$(CONFIG_MEMTEST_REVISION) \ |
| CONFIG_MEMTEST_REVISION_ID=$(CONFIG_MEMTEST_REVISION_ID) \ |
| CONFIG_MEMTEST_MASTER=$(CONFIG_MEMTEST_MASTER) \ |
| CONFIG_MEMTEST_STABLE=$(CONFIG_MEMTEST_STABLE) \ |
| $(MEMTEST_SERIAL_OPTIONS) \ |
| MFLAGS= MAKEFLAGS= |
| |
| # iPXE |
| |
| PXE_ROM_PCI_ID:=$(subst $(comma),,$(CONFIG_PXE_ROM_ID)) |
| |
| ifeq ($(CONFIG_PXE_ROM),y) |
| PXE_ROM_FILE:=$(CONFIG_PXE_ROM_FILE) |
| endif |
| ifeq ($(CONFIG_BUILD_IPXE),y) |
| PXE_ROM_FILE:=payloads/external/iPXE/ipxe/ipxe.rom |
| endif |
| ifeq ($(CONFIG_PXE_ADD_SCRIPT),y) |
| PXE_CONFIG_SCRIPT:=$(abspath $(patsubst "%",%,$(CONFIG_PXE_SCRIPT))) |
| endif |
| ifeq ($(CONFIG_CONSOLE_SERIAL)$(CONFIG_DRIVERS_UART_8250IO),yy) |
| IPXE_UART=COM$(call int-add,$(CONFIG_UART_FOR_CONSOLE) 1) |
| endif |
| |
| ifeq ($(CONFIG_PXE_SERIAL_CONSOLE),y) |
| IPXE_SERIAL_CONSOLE = $(CONFIG_CONSOLE_SERIAL)$(CONFIG_DRIVERS_UART_8250IO) |
| else |
| IPXE_SERIAL_CONSOLE = n |
| endif |
| |
| cbfs-files-$(CONFIG_PXE_ROM)$(CONFIG_BUILD_IPXE) += pci$(CONFIG_PXE_ROM_ID).rom |
| pci$(CONFIG_PXE_ROM_ID).rom-file := $(PXE_ROM_FILE) |
| pci$(CONFIG_PXE_ROM_ID).rom-type := raw |
| |
| payloads/external/iPXE/ipxe/ipxe.rom ipxe: $(DOTCONFIG) $(PXE_CONFIG_SCRIPT) |
| $(MAKE) -C payloads/external/iPXE all \ |
| CROSS_COMPILE="$(CROSS_COMPILE_$(ARCH-ramstage-y))" \ |
| PXE_ROM_PCI_ID=$(PXE_ROM_PCI_ID) \ |
| CONFIG_IPXE_MASTER=$(CONFIG_IPXE_MASTER) \ |
| CONFIG_IPXE_STABLE=$(CONFIG_IPXE_STABLE) \ |
| CONSOLE_SERIAL=$(IPXE_SERIAL_CONSOLE) \ |
| IPXE_UART=$(IPXE_UART) \ |
| CONFIG_TTYS0_BAUD=$(CONFIG_TTYS0_BAUD) \ |
| CONFIG_SCRIPT=$(PXE_CONFIG_SCRIPT) \ |
| CONFIG_HAS_SCRIPT=$(CONFIG_PXE_ADD_SCRIPT) \ |
| CONFIG_PXE_NO_PROMPT=$(CONFIG_PXE_NO_PROMPT) \ |
| CONFIG_PXE_HAS_HTTPS=$(CONFIG_PXE_HAS_HTTPS) \ |
| MFLAGS= MAKEFLAGS= |
| |
| # LinuxBoot |
| .PHONY: linuxboot |
| linuxboot: |
| $(MAKE) -C payloads/external/LinuxBoot \ |
| CPUS=$(CPUS) \ |
| CONFIG_LINUXBOOT_X86_64=$(CONFIG_LINUXBOOT_X86_64) \ |
| CONFIG_LINUXBOOT_X86=$(CONFIG_LINUXBOOT_X86) \ |
| CONFIG_LINUXBOOT_ARM64=$(CONFIG_LINUXBOOT_ARM64) \ |
| CONFIG_LINUXBOOT_KERNEL=$(CONFIG_PAYLOAD_FILE) \ |
| CONFIG_LINUXBOOT_INITRAMFS=$(CONFIG_LINUX_INITRD) \ |
| CONFIG_LINUXBOOT_INITRAMFS_SUFFIX=$(CONFIG_LINUXBOOT_INITRAMFS_SUFFIX) \ |
| CONFIG_LINUXBOOT_COMPILE_KERNEL=$(CONFIG_LINUXBOOT_COMPILE_KERNEL) \ |
| CONFIG_LINUXBOOT_BUILD_INITRAMFS=$(CONFIG_LINUXBOOT_BUILD_INITRAMFS) \ |
| CONFIG_LINUXBOOT_KERNEL_MAINLINE=$(CONFIG_LINUXBOOT_KERNEL_MAINLINE) \ |
| CONFIG_LINUXBOOT_KERNEL_STABLE=$(CONFIG_LINUXBOOT_KERNEL_STABLE) \ |
| CONFIG_LINUXBOOT_KERNEL_LONGTERM=$(CONFIG_LINUXBOOT_KERNEL_LONGTERM) \ |
| CONFIG_LINUXBOOT_KERNEL_CUSTOM=$(CONFIG_LINUXBOOT_KERNEL_CUSTOM) \ |
| CONFIG_LINUXBOOT_KERNEL_CUSTOM_VERSION=$(CONFIG_LINUXBOOT_KERNEL_CUSTOM_VERSION) \ |
| CONFIG_LINUXBOOT_KERNEL_CUSTOM_CONFIG=$(CONFIG_LINUXBOOT_KERNEL_CUSTOM_CONFIG) \ |
| CONFIG_LINUXBOOT_KERNEL_BZIMAGE=$(CONFIG_LINUXBOOT_KERNEL_BZIMAGE) \ |
| CONFIG_LINUXBOOT_KERNEL_UIMAGE=$(CONFIG_LINUXBOOT_KERNEL_UIMAGE) \ |
| CONFIG_LINUXBOOT_KERNEL_CONFIGFILE=$(CONFIG_LINUXBOOT_KERNEL_CONFIGFILE) \ |
| CONFIG_LINUXBOOT_INITRAMFS_COMPRESSION_XZ=$(CONFIG_LINUXBOOT_INITRAMFS_COMPRESSION_XZ) \ |
| CONFIG_LINUXBOOT_UROOT=$(CONFIG_LINUXBOOT_UROOT) \ |
| CONFIG_LINUXBOOT_UROOT_VERSION=$(CONFIG_LINUXBOOT_UROOT_VERSION) \ |
| CONFIG_LINUXBOOT_UROOT_FORMAT=$(CONFIG_LINUXBOOT_UROOT_FORMAT) \ |
| CONFIG_LINUXBOOT_UROOT_INITCMD=$(CONFIG_LINUXBOOT_UROOT_INITCMD) \ |
| CONFIG_LINUXBOOT_UROOT_UINITCMD=$(CONFIG_LINUXBOOT_UROOT_UINITCMD)\ |
| CONFIG_LINUXBOOT_UROOT_SHELL=$(CONFIG_LINUXBOOT_UROOT_SHELL) \ |
| CONFIG_LINUXBOOT_UROOT_COMMANDS=$(CONFIG_LINUXBOOT_UROOT_COMMANDS) \ |
| CONFIG_LINUXBOOT_UROOT_FILES=$(CONFIG_LINUXBOOT_UROOT_FILES) \ |
| CONFIG_LINUXBOOT_DTB_FILE=$(CONFIG_LINUXBOOT_DTB_FILE) |
| |
| payloads/external/LinuxBoot/linuxboot/bzImage: linuxboot |
| payloads/external/LinuxBoot/linuxboot/uImage: linuxboot |
| payloads/external/LinuxBoot/linuxboot/initramfs_u-root.cpio: linuxboot |
| |
| # BOOTBOOT |
| |
| payloads/external/BOOTBOOT/bootboot/dist/bootbootcb.elf: |
| $(MAKE) -C payloads/external/BOOTBOOT all |
| |
| # skiboot |
| |
| payloads/external/skiboot/build/skiboot.elf: |
| $(MAKE) -C payloads/external/skiboot all \ |
| CONFIG_SKIBOOT_GIT_REPO=$(CONFIG_SKIBOOT_GIT_REPO) \ |
| CONFIG_SKIBOOT_REVISION=$(CONFIG_SKIBOOT_REVISION) |
| # COREDOOM |
| |
| payloads/external/coreDOOM/coredoom/doomgeneric/coredoom.elf coredoom: |
| $(MAKE) -C payloads/external/coreDOOM |
| |
| cbfs-files-$(CONFIG_COREDOOM_SECONDARY_PAYLOAD) += img/coreDOOM |
| img/coreDOOM-file := payloads/external/coreDOOM/coredoom/doomgeneric/coredoom.elf |
| img/coreDOOM-type := payload |
| img/coreDOOM-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG) |
| # WAD file |
| ifneq ($(strip $(CONFIG_COREDOOM_WAD_FILE)),) |
| cbfs-files-y += doom.wad |
| doom.wad-file := $(strip $(CONFIG_COREDOOM_WAD_FILE)) |
| doom.wad-type := raw |
| doom.wad-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG) |
| endif |