| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <console/console.h> |
| #include <delay.h> |
| #include <edid.h> |
| #include <framebuffer_info.h> |
| #include <gpio.h> |
| #include <soc/ddp.h> |
| #include <soc/dptx.h> |
| #include <soc/dsi.h> |
| #include <soc/gpio_common.h> |
| #include <soc/mtcmos.h> |
| |
| #include "display.h" |
| #include "gpio.h" |
| #include "panel.h" |
| |
| int configure_display(void) |
| { |
| struct edid edid; |
| struct fb_info *info; |
| const char *name; |
| struct panel_description *panel = get_active_panel(); |
| if (!panel) |
| return -1; |
| |
| printk(BIOS_INFO, "%s: Starting display initialization\n", __func__); |
| |
| mtcmos_display_power_on(); |
| mtcmos_protect_display_bus(); |
| |
| panel->configure_panel_backlight(); |
| panel->power_on(); |
| |
| mtk_ddp_init(); |
| mdelay(200); |
| |
| if (panel->disp_path == DISP_PATH_EDP) { |
| if (mtk_edp_init(&edid) < 0) { |
| printk(BIOS_ERR, "%s: Failed to initialize eDP\n", __func__); |
| return -1; |
| } |
| |
| } else { |
| u32 mipi_dsi_flags = (MIPI_DSI_MODE_VIDEO | |
| MIPI_DSI_MODE_VIDEO_SYNC_PULSE | |
| MIPI_DSI_MODE_LPM | |
| MIPI_DSI_MODE_EOT_PACKET); |
| |
| edid = panel->s->edid; |
| |
| if (mtk_dsi_init(mipi_dsi_flags, MIPI_DSI_FMT_RGB888, 4, &edid, |
| panel->s->init) < 0) { |
| printk(BIOS_ERR, "%s: Failed in DSI init\n", __func__); |
| return -1; |
| } |
| } |
| |
| name = edid.ascii_string; |
| if (name[0] == '\0') |
| name = "unknown name"; |
| printk(BIOS_INFO, "%s: '%s %s' %dx%d@%dHz\n", __func__, |
| edid.manufacturer_name, name, edid.mode.ha, edid.mode.va, |
| edid.mode.refresh); |
| |
| edid_set_framebuffer_bits_per_pixel(&edid, 32, 0); |
| |
| mtk_ddp_mode_set(&edid, panel->disp_path); |
| info = fb_new_framebuffer_info_from_edid(&edid, (uintptr_t)0); |
| if (info) |
| fb_set_orientation(info, LB_FB_ORIENTATION_BOTTOM_UP); |
| |
| return 0; |
| } |