| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <stdint.h> |
| #include <acpi/acpi_gnvs.h> |
| #include <console/console.h> |
| #include <device/device.h> |
| #include <device/pci.h> |
| #include <device/pci_ids.h> |
| #include <reg_script.h> |
| |
| #include <soc/iosf.h> |
| #include <soc/nvs.h> |
| #include <soc/pci_devs.h> |
| #include <soc/ramstage.h> |
| |
| #include "chip.h" |
| |
| static void dev_enable_acpi_mode(struct device *dev, int iosf_reg, int nvs_index) |
| { |
| struct reg_script ops[] = { |
| /* Disable PCI interrupt, enable Memory and Bus Master */ |
| REG_PCI_OR16(PCI_COMMAND, |
| PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INT_DISABLE), |
| /* Enable ACPI mode */ |
| REG_IOSF_OR(IOSF_PORT_LPSS, iosf_reg, |
| LPSS_CTL_PCI_CFG_DIS | LPSS_CTL_ACPI_INT_EN), |
| |
| REG_SCRIPT_END |
| }; |
| struct resource *bar; |
| struct global_nvs *gnvs; |
| |
| /* Find ACPI NVS to update BARs */ |
| gnvs = acpi_get_gnvs(); |
| if (!gnvs) |
| return; |
| |
| /* Save BAR0 and BAR1 to ACPI NVS */ |
| bar = find_resource(dev, PCI_BASE_ADDRESS_0); |
| if (bar) |
| gnvs->dev.lpss_bar0[nvs_index] = (u32)bar->base; |
| |
| bar = find_resource(dev, PCI_BASE_ADDRESS_1); |
| if (bar) |
| gnvs->dev.lpss_bar1[nvs_index] = (u32)bar->base; |
| |
| /* Device is enabled in ACPI mode */ |
| gnvs->dev.lpss_en[nvs_index] = 1; |
| |
| /* Put device in ACPI mode */ |
| reg_script_run_on_dev(dev, ops); |
| } |
| |
| #define SET_IOSF_REG(name_) \ |
| case PCI_DEVFN(name_ ## _DEV, name_ ## _FUNC): \ |
| do { \ |
| *iosf_reg = LPSS_ ## name_ ## _CTL; \ |
| *nvs_index = LPSS_NVS_ ## name_; \ |
| } while (0) |
| |
| static void dev_ctl_reg(struct device *dev, int *iosf_reg, int *nvs_index) |
| { |
| *iosf_reg = -1; |
| *nvs_index = -1; |
| |
| switch (dev->path.pci.devfn) { |
| SET_IOSF_REG(SIO_DMA1); |
| break; |
| SET_IOSF_REG(I2C1); |
| break; |
| SET_IOSF_REG(I2C2); |
| break; |
| SET_IOSF_REG(I2C3); |
| break; |
| SET_IOSF_REG(I2C4); |
| break; |
| SET_IOSF_REG(I2C5); |
| break; |
| SET_IOSF_REG(I2C6); |
| break; |
| SET_IOSF_REG(I2C7); |
| break; |
| SET_IOSF_REG(SIO_DMA2); |
| break; |
| SET_IOSF_REG(PWM1); |
| break; |
| SET_IOSF_REG(PWM2); |
| break; |
| SET_IOSF_REG(HSUART1); |
| break; |
| SET_IOSF_REG(HSUART2); |
| break; |
| SET_IOSF_REG(SPI); |
| break; |
| } |
| } |
| |
| #define CASE_I2C(name_) case PCI_DEVFN(name_ ## _DEV, name_ ## _FUNC) |
| |
| static void i2c_disable_resets(struct device *dev) |
| { |
| /* Release the I2C devices from reset. */ |
| static const struct reg_script ops[] = { |
| REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x804, 0x3), |
| REG_SCRIPT_END, |
| }; |
| |
| switch (dev->path.pci.devfn) { |
| CASE_I2C(I2C1) : |
| CASE_I2C(I2C2) : |
| CASE_I2C(I2C3) : |
| CASE_I2C(I2C4) : |
| CASE_I2C(I2C5) : |
| CASE_I2C(I2C6) : |
| CASE_I2C(I2C7) : |
| printk(BIOS_DEBUG, "Releasing I2C device from reset.\n"); |
| reg_script_run_on_dev(dev, ops); |
| break; |
| default: |
| return; |
| } |
| } |
| |
| static void lpss_init(struct device *dev) |
| { |
| struct soc_intel_braswell_config *config = config_of(dev); |
| int iosf_reg, nvs_index; |
| |
| dev_ctl_reg(dev, &iosf_reg, &nvs_index); |
| |
| if (iosf_reg < 0) { |
| int slot = PCI_SLOT(dev->path.pci.devfn); |
| int func = PCI_FUNC(dev->path.pci.devfn); |
| printk(BIOS_DEBUG, "Could not find iosf_reg for %02x.%01x\n", slot, func); |
| return; |
| } |
| |
| i2c_disable_resets(dev); |
| |
| if (config->lpss_acpi_mode) |
| dev_enable_acpi_mode(dev, iosf_reg, nvs_index); |
| } |
| |
| static struct device_operations device_ops = { |
| .read_resources = pci_dev_read_resources, |
| .set_resources = pci_dev_set_resources, |
| .enable_resources = pci_dev_enable_resources, |
| .init = lpss_init, |
| .ops_pci = &soc_pci_ops, |
| }; |
| |
| static const unsigned short pci_device_ids[] = { |
| SIO_DMA1_DEVID, |
| I2C1_DEVID, |
| I2C2_DEVID, |
| I2C3_DEVID, |
| I2C4_DEVID, |
| I2C5_DEVID, |
| I2C6_DEVID, |
| I2C7_DEVID, |
| SIO_DMA2_DEVID, |
| PWM1_DEVID, |
| PWM2_DEVID, |
| HSUART1_DEVID, |
| HSUART2_DEVID, |
| SPI_DEVID, |
| 0, |
| }; |
| |
| static const struct pci_driver southcluster __pci_driver = { |
| .ops = &device_ops, |
| .vendor = PCI_VENDOR_ID_INTEL, |
| .devices = pci_device_ids, |
| }; |