| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2003 by Eric Biederman |
| * Copyright (C) Stefan Reinauer |
| * Copyright (C) 2007 Advanced Micro Devices, Inc. |
| * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering |
| * Copyright (C) 2016 Damien Zammit <damien@zamaudio.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| /* Turn off machine check triggers when reading |
| * pci space where there are no devices. |
| * This is necessary when scaning the bus for |
| * devices which is done by the kernel |
| */ |
| |
| #include <console/console.h> |
| #include <device/device.h> |
| #include <device/pci.h> |
| #include <device/pci_ids.h> |
| #include <device/pci_ops.h> |
| #include <pc80/mc146818rtc.h> |
| #include <lib.h> |
| #include <cbmem.h> |
| #include <cpu/amd/model_10xxx_rev.h> |
| |
| #include "amdfam10.h" |
| |
| /** |
| * @brief Read resources for AGP aperture |
| * |
| * @param dev |
| * |
| * There is only one AGP aperture resource needed. The resource is added to |
| * the northbridge of BSP. |
| * |
| * The same trick can be used to augment legacy VGA resources which can |
| * be detect by generic pci reousrce allocator for VGA devices. |
| * BAD: it is more tricky than I think, the resource allocation code is |
| * implemented in a way to NOT DOING legacy VGA resource allocation on |
| * purpose :-(. |
| */ |
| static void mcf3_read_resources(device_t dev) |
| { |
| struct resource *resource; |
| unsigned char gart; |
| /* Read the generic PCI resources */ |
| pci_dev_read_resources(dev); |
| |
| /* If we are not the first processor don't allocate the gart apeture */ |
| if (dev->path.pci.devfn != PCI_DEVFN(CONFIG_CDB, 3)) { |
| return; |
| } |
| |
| gart = 1; |
| get_option(&gart, "gart"); |
| |
| if (gart) { |
| /* Add a Gart apeture resource */ |
| resource = new_resource(dev, 0x94); |
| resource->size = gart?CONFIG_AGP_APERTURE_SIZE:1; |
| resource->align = log2(resource->size); |
| resource->gran = log2(resource->size); |
| resource->limit = 0xffffffff; /* 4G */ |
| resource->flags = IORESOURCE_MEM; |
| } |
| } |
| |
| static void set_agp_aperture(device_t dev, uint32_t pci_id) |
| { |
| uint32_t dword; |
| struct resource *resource; |
| |
| resource = probe_resource(dev, 0x94); |
| if (resource) { |
| device_t pdev; |
| u32 gart_base, gart_acr; |
| |
| /* Remember this resource has been stored */ |
| resource->flags |= IORESOURCE_STORED; |
| |
| /* Find the size of the GART aperture */ |
| gart_acr = (0<<6)|(0<<5)|(0<<4)|((resource->gran - 25) << 1)|(0<<0); |
| |
| /* Get the base address */ |
| gart_base = ((resource->base) >> 25) & 0x00007fff; |
| |
| /* Update the other northbriges */ |
| pdev = 0; |
| while ((pdev = dev_find_device(PCI_VENDOR_ID_AMD, pci_id, pdev))) { |
| /* Store the GART size but don't enable it */ |
| pci_write_config32(pdev, 0x90, gart_acr); |
| |
| /* Store the GART base address */ |
| pci_write_config32(pdev, 0x94, gart_base); |
| |
| /* Don't set the GART Table base address */ |
| pci_write_config32(pdev, 0x98, 0); |
| |
| /* Report the resource has been stored... */ |
| report_resource_stored(pdev, resource, " <gart>"); |
| |
| /* Errata 540 workaround */ |
| dword = pci_read_config32(pdev, 0x90); |
| dword |= 0x1 << 6; /* DisGartTblWlkPrb = 0x1 */ |
| pci_write_config32(pdev, 0x90, dword); |
| } |
| } |
| } |
| |
| static void mcf3_set_resources_fam10h(device_t dev) |
| { |
| /* Set the gart aperture */ |
| set_agp_aperture(dev, 0x1203); |
| |
| /* Set the generic PCI resources */ |
| pci_dev_set_resources(dev); |
| } |
| |
| static void mcf3_set_resources_fam15h_model10(device_t dev) |
| { |
| /* Set the gart aperture */ |
| set_agp_aperture(dev, 0x1403); |
| |
| /* Set the generic PCI resources */ |
| pci_dev_set_resources(dev); |
| } |
| |
| static void mcf3_set_resources_fam15h(device_t dev) |
| { |
| /* Set the gart aperture */ |
| set_agp_aperture(dev, 0x1603); |
| |
| /* Set the generic PCI resources */ |
| pci_dev_set_resources(dev); |
| } |
| |
| static void misc_control_init(struct device *dev) |
| { |
| uint32_t dword; |
| uint8_t nvram; |
| uint8_t boost_limit; |
| uint8_t current_boost; |
| |
| printk(BIOS_DEBUG, "NB: Function 3 Misc Control.. "); |
| |
| #if IS_ENABLED(CONFIG_DIMM_DDR3) && !IS_ENABLED(CONFIG_NORTHBRIDGE_AMD_AGESA) |
| uint8_t node; |
| uint8_t slot; |
| uint8_t dimm_present; |
| |
| /* Restore DRAM MCA registers */ |
| struct amdmct_memory_info *mem_info; |
| mem_info = cbmem_find(CBMEM_ID_AMDMCT_MEMINFO); |
| if (mem_info) { |
| node = PCI_SLOT(dev->path.pci.devfn) - 0x18; |
| |
| /* Check node for installed DIMMs */ |
| dimm_present = 0; |
| |
| /* Check all slots for installed DIMMs */ |
| for (slot = 0; slot < MAX_DIMMS_SUPPORTED; slot++) { |
| if (mem_info->dct_stat[node].DIMMPresent & (1 << slot)) { |
| dimm_present = 1; |
| break; |
| } |
| } |
| |
| if (dimm_present) { |
| uint32_t mc4_status_high = pci_read_config32(dev, 0x4c); |
| uint32_t mc4_status_low = pci_read_config32(dev, 0x48); |
| if ((mc4_status_high & (0x1 << 31)) && (mc4_status_high != 0xffffffff)) { |
| printk(BIOS_WARNING, "\nWARNING: MC4 Machine Check Exception detected on node %d!\n" |
| "Signature: %08x%08x\n", node, mc4_status_high, mc4_status_low); |
| } |
| |
| /* Clear MC4 error status */ |
| pci_write_config32(dev, 0x48, 0x0); |
| pci_write_config32(dev, 0x4c, 0x0); |
| |
| if (mem_info->dct_stat[node].mca_config_backed_up) { |
| dword = pci_read_config32(dev, 0x44); |
| dword |= (mem_info->dct_stat[node].sync_flood_on_dram_err & 0x1) << 30; |
| dword |= (mem_info->dct_stat[node].sync_flood_on_any_uc_err & 0x1) << 21; |
| dword |= (mem_info->dct_stat[node].sync_flood_on_uc_dram_ecc_err & 0x1) << 2; |
| pci_write_config32(dev, 0x44, dword); |
| } |
| } |
| } |
| #endif |
| |
| /* Disable Machine checks from Invalid Locations. |
| * This is needed for PC backwards compatibility. |
| */ |
| dword = pci_read_config32(dev, 0x44); |
| dword |= (1<<6) | (1<<25); |
| pci_write_config32(dev, 0x44, dword); |
| |
| boost_limit = 0xf; |
| if (get_option(&nvram, "maximum_p_state_limit") == CB_SUCCESS) |
| boost_limit = nvram & 0xf; |
| |
| /* Set P-state maximum value */ |
| dword = pci_read_config32(dev, 0xdc); |
| current_boost = (dword >> 8) & 0x7; |
| if (boost_limit > current_boost) |
| boost_limit = current_boost; |
| dword &= ~(0x7 << 8); |
| dword |= (boost_limit & 0x7) << 8; |
| pci_write_config32(dev, 0xdc, dword); |
| |
| printk(BIOS_DEBUG, "done.\n"); |
| } |
| |
| |
| static struct device_operations mcf3_ops_fam10h = { |
| .read_resources = mcf3_read_resources, |
| .set_resources = mcf3_set_resources_fam10h, |
| .enable_resources = pci_dev_enable_resources, |
| .init = misc_control_init, |
| .scan_bus = 0, |
| .ops_pci = 0, |
| }; |
| |
| static struct device_operations mcf3_ops_fam15h_model10 = { |
| .read_resources = mcf3_read_resources, |
| .set_resources = mcf3_set_resources_fam15h_model10, |
| .enable_resources = pci_dev_enable_resources, |
| .init = misc_control_init, |
| .scan_bus = 0, |
| .ops_pci = 0, |
| }; |
| |
| static struct device_operations mcf3_ops_fam15h = { |
| .read_resources = mcf3_read_resources, |
| .set_resources = mcf3_set_resources_fam15h, |
| .enable_resources = pci_dev_enable_resources, |
| .init = misc_control_init, |
| .scan_bus = 0, |
| .ops_pci = 0, |
| }; |
| |
| static const struct pci_driver mcf3_driver __pci_driver = { |
| .ops = &mcf3_ops_fam10h, |
| .vendor = PCI_VENDOR_ID_AMD, |
| .device = 0x1203, |
| }; |
| |
| static const struct pci_driver mcf3_driver_fam15_model10 __pci_driver = { |
| .ops = &mcf3_ops_fam15h_model10, |
| .vendor = PCI_VENDOR_ID_AMD, |
| .device = 0x1403, |
| }; |
| |
| static const struct pci_driver mcf3_driver_fam15 __pci_driver = { |
| .ops = &mcf3_ops_fam15h, |
| .vendor = PCI_VENDOR_ID_AMD, |
| .device = 0x1603, |
| }; |