| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #ifndef TIS_H_ |
| #define TIS_H_ |
| |
| #include <stddef.h> |
| #include <stdint.h> |
| #include <types.h> |
| |
| enum tis_access { |
| TPM_ACCESS_VALID = (1 << 7), |
| TPM_ACCESS_ACTIVE_LOCALITY = (1 << 5), |
| TPM_ACCESS_REQUEST_PENDING = (1 << 2), |
| TPM_ACCESS_REQUEST_USE = (1 << 1), |
| TPM_ACCESS_ESTABLISHMENT = (1 << 0), |
| }; |
| |
| enum tis_status { |
| TPM_STS_FAMILY_SHIFT = 26, |
| TPM_STS_FAMILY_MASK = (0x3 << TPM_STS_FAMILY_SHIFT), |
| TPM_STS_FAMILY_TPM_2_0 = (1 << TPM_STS_FAMILY_SHIFT), |
| TPM_STS_FAMILY_TPM_1_2 = (0 << TPM_STS_FAMILY_SHIFT), |
| TPM_STS_RESET_ESTABLISHMENT = (1 << 25), |
| TPM_STS_COMMAND_CANCEL = (1 << 24), |
| TPM_STS_BURST_COUNT_SHIFT = 8, |
| TPM_STS_BURST_COUNT_MASK = (0xFFFF << TPM_STS_BURST_COUNT_SHIFT), |
| TPM_STS_VALID = (1 << 7), |
| TPM_STS_COMMAND_READY = (1 << 6), |
| TPM_STS_GO = (1 << 5), |
| TPM_STS_DATA_AVAIL = (1 << 4), |
| TPM_STS_DATA_EXPECT = (1 << 3), |
| TPM_STS_SELF_TEST_DONE = (1 << 2), |
| TPM_STS_RESPONSE_RETRY = (1 << 1), |
| }; |
| |
| /* |
| * tis_init() |
| * |
| * Initialize the TPM device. Returns 0 on success or -1 on |
| * failure (in case device probing did not succeed). |
| */ |
| int tis_init(void); |
| |
| /* |
| * tis_open() |
| * |
| * Requests access to locality 0 for the caller. After all commands have been |
| * completed the caller is supposed to call tis_close(). |
| * |
| * Returns 0 on success, -1 on failure. |
| */ |
| int tis_open(void); |
| |
| /* |
| * tis_close() |
| * |
| * terminate the current session with the TPM by releasing the locked |
| * locality. Returns 0 on success of -1 on failure (in case lock |
| * removal did not succeed). |
| */ |
| int tis_close(void); |
| |
| /* |
| * tis_sendrecv() |
| * |
| * Send the requested data to the TPM and then try to get its response |
| * |
| * @sendbuf - buffer of the data to send |
| * @send_size size of the data to send |
| * @recvbuf - memory to save the response to |
| * @recv_len - pointer to the size of the response buffer |
| * |
| * Returns 0 on success (and places the number of response bytes at recv_len) |
| * or -1 on failure. |
| */ |
| int tis_sendrecv(const u8 *sendbuf, size_t send_size, u8 *recvbuf, |
| size_t *recv_len); |
| |
| /* |
| * tis_plat_irq_status() |
| * |
| * Check tpm irq and clear it. |
| * |
| * Returns 1 when irq pending or 0 when not. |
| */ |
| int tis_plat_irq_status(void); |
| |
| /* |
| * tis_vendor_write() |
| * |
| * Vendor-specific function to send the requested data to the TPM. |
| * |
| * @addr - address of the register to write to |
| * @sendbuf - buffer of the data to send |
| * @send_size - size of the data to send |
| * |
| * Returns CB_SUCCESS 0 on success, CB_ERR on failure. |
| */ |
| enum cb_err tis_vendor_write(unsigned int addr, const void *sendbuf, size_t send_size); |
| |
| /* |
| * tis_vendor_read() |
| * |
| * Vendor-specific function to read the requested data from the TPM. |
| * |
| * @addr - address of the register to read from |
| * @recvbuf - buffer of the data to read |
| * @recv_size - size of the output buffer |
| * |
| * Returns CB_SUCCESS on success or -1 on failure. |
| */ |
| enum cb_err tis_vendor_read(unsigned int addr, void *recvbuf, size_t recv_size); |
| |
| static inline bool tpm_first_access_this_boot(void) |
| { |
| return ENV_SEPARATE_VERSTAGE || ENV_BOOTBLOCK || !CONFIG(VBOOT); |
| } |
| |
| #endif /* TIS_H_ */ |