| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2015 Damien Zammit <damien@zamaudio.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <stdlib.h> |
| #include <console/console.h> |
| #include <arch/io.h> |
| #include <device/pci_ops.h> |
| #include <device/pci_def.h> |
| #include <device/pci.h> |
| #include <northbridge/intel/pineview/pineview.h> |
| #include <northbridge/intel/pineview/chip.h> |
| #include <pc80/mc146818rtc.h> |
| #include <types.h> |
| |
| #define LPC PCI_DEV(0, 0x1f, 0) |
| #define D0F0 PCI_DEV(0, 0, 0) |
| |
| #define PCI_GCFC 0xf0 |
| #define MCH_GCFGC 0xc8c |
| #define CRCLK_PINEVIEW 0x02 |
| #define CDCLK_PINEVIEW 0x10 |
| #define MCH_HPLLVCO 0xc38 |
| |
| static void early_graphics_setup(void) |
| { |
| u8 reg8; |
| u16 reg16; |
| u32 reg32; |
| |
| const struct device *d0f0 = pcidev_on_root(0, 0); |
| const struct northbridge_intel_pineview_config *config = d0f0->chip_info; |
| |
| pci_write_config8(D0F0, DEVEN, BOARD_DEVEN); |
| |
| /* vram size from cmos option */ |
| if (get_option(®8, "gfx_uma_size") != CB_SUCCESS) |
| reg8 = 0; /* 0 for 8MB */ |
| /* make sure no invalid setting is used */ |
| if (reg8 > 6) |
| reg8 = 0; |
| /* Select 1M GTT */ |
| pci_write_config16(PCI_DEV(0, 0x00, 0), GGC, (1 << 8) |
| | ((reg8 + 3) << 4)); |
| |
| printk(BIOS_SPEW, "Set GFX clocks..."); |
| reg16 = MCHBAR16(MCH_GCFGC); |
| MCHBAR16(MCH_GCFGC) = reg16 | (1 << 9); |
| reg16 &= ~0x7f; |
| reg16 |= CDCLK_PINEVIEW | CRCLK_PINEVIEW; |
| reg16 &= ~(1 << 9); |
| MCHBAR16(MCH_GCFGC) = reg16; |
| |
| /* Graphics core */ |
| reg8 = MCHBAR8(MCH_HPLLVCO); |
| reg8 &= 0x7; |
| |
| reg16 = pci_read_config16(PCI_DEV(0,2,0), 0xcc) & ~0x1ff; |
| |
| if (reg8 == 0x4) { |
| /* 2666MHz */ |
| reg16 |= 0xad; |
| } else if (reg8 == 0) { |
| /* 3200MHz */ |
| reg16 |= 0xa0; |
| } else if (reg8 == 1) { |
| /* 4000MHz */ |
| reg16 |= 0xad; |
| } |
| |
| pci_write_config16(PCI_DEV(0,2,0), 0xcc, reg16); |
| |
| pci_write_config8(PCI_DEV(0,2,0), 0x62, |
| pci_read_config8(PCI_DEV(0,2,0), 0x62) & ~0x3); |
| pci_write_config8(PCI_DEV(0,2,0), 0x62, |
| pci_read_config8(PCI_DEV(0,2,0), 0x62) | 2); |
| |
| if (config->use_crt) { |
| /* Enable VGA */ |
| MCHBAR32(0xb08) = MCHBAR32(0xb08) | (1 << 15); |
| } else { |
| /* Disable VGA */ |
| MCHBAR32(0xb08) = MCHBAR32(0xb08) & ~(1 << 15); |
| } |
| |
| if (config->use_lvds) { |
| /* Enable LVDS */ |
| reg32 = MCHBAR32(0x3004); |
| reg32 &= ~0xf1000000; |
| reg32 |= 0x90000000; |
| MCHBAR32(0x3004) = reg32; |
| MCHBAR32(0x3008) = MCHBAR32(0x3008) | (1 << 9); |
| } else { |
| /* Disable LVDS */ |
| MCHBAR32(0xb08) = MCHBAR32(0xb08) | (3 << 25); |
| } |
| |
| MCHBAR32(0xff4) = 0x0c6db8b5f; |
| MCHBAR16(0xff8) = 0x24f; |
| |
| MCHBAR32(0xb08) = MCHBAR32(0xb08) & 0xffffff00; |
| MCHBAR32(0xb08) = MCHBAR32(0xb08) | (1 << 5); |
| |
| /* Legacy backlight control */ |
| pci_write_config8(PCI_DEV(0, 2, 0), 0xf4, 0x4c); |
| } |
| |
| static void early_misc_setup(void) |
| { |
| MCHBAR32(0x30); |
| MCHBAR32(0x30) = 0x21800; |
| DMIBAR32(0x2c) = 0x86000040; |
| pci_write_config32(PCI_DEV(0, 0x1e, 0), 0x18, 0x00020200); |
| pci_write_config32(PCI_DEV(0, 0x1e, 0), 0x18, 0x00000000); |
| |
| early_graphics_setup(); |
| |
| MCHBAR32(0x40); |
| MCHBAR32(0x40) = 0x0; |
| MCHBAR32(0x40); |
| MCHBAR32(0x40) = 0x8; |
| |
| pci_write_config8(LPC, 0x8, 0x1d); |
| pci_write_config8(LPC, 0x8, 0x0); |
| RCBA32(0x3410) = 0x00020465; |
| |
| ich7_setup_cir(); |
| |
| pci_write_config32(PCI_DEV(0, 0x1d, 0), 0xca, 0x1); |
| pci_write_config32(PCI_DEV(0, 0x1d, 1), 0xca, 0x1); |
| pci_write_config32(PCI_DEV(0, 0x1d, 2), 0xca, 0x1); |
| pci_write_config32(PCI_DEV(0, 0x1d, 3), 0xca, 0x1); |
| |
| RCBA32(0x3100) = 0x42210; |
| RCBA32(0x3108) = 0x10004321; |
| RCBA32(0x310c) = 0x00214321; |
| RCBA32(0x3110) = 0x1; |
| RCBA32(0x3140) = 0x01460132; |
| RCBA32(0x3142) = 0x02370146; |
| RCBA32(0x3144) = 0x32010237; |
| RCBA32(0x3146) = 0x01463201; |
| RCBA32(0x3148) = 0x146; |
| } |
| |
| static void pineview_setup_bars(void) |
| { |
| /* Setting up Southbridge. In the northbridge code. */ |
| printk(BIOS_DEBUG, "Setting up static southbridge registers..."); |
| pci_write_config32(LPC, RCBA, (uintptr_t)DEFAULT_RCBA | 1); |
| pci_write_config32(LPC, PMBASE, DEFAULT_PMBASE | 1); |
| pci_write_config8(LPC, 0x44 /* ACPI_CNTL */, 0x80); /* Enable ACPI */ |
| pci_write_config32(LPC, GPIOBASE, DEFAULT_GPIOBASE | 1); |
| pci_write_config8(LPC, 0x4c /* GC */, 0x10); /* Enable GPIOs */ |
| pci_write_config32(LPC, 0x88, 0x007c0291); |
| |
| pci_write_config32(PCI_DEV(0, 0x1e, 0), 0x1b, 0x20); |
| printk(BIOS_DEBUG, " done.\n"); |
| |
| printk(BIOS_DEBUG, "Disabling Watchdog reboot..."); |
| RCBA32(GCS) = RCBA32(GCS) | (1 << 5); /* No reset */ |
| outw((1 << 11), DEFAULT_PMBASE | 0x60 | 0x08); /* halt timer */ |
| printk(BIOS_DEBUG, " done.\n"); |
| |
| /* Enable upper 128bytes of CMOS */ |
| RCBA32(0x3400) = (1 << 2); |
| |
| printk(BIOS_DEBUG, "Setting up static northbridge registers..."); |
| pci_write_config8(D0F0, 0x8, 0x69); |
| |
| /* Set up all hardcoded northbridge BARs */ |
| pci_write_config32(D0F0, EPBAR, DEFAULT_EPBAR | 1); |
| pci_write_config32(D0F0, MCHBAR, (uintptr_t)DEFAULT_MCHBAR | 1); |
| pci_write_config32(D0F0, DMIBAR, (uintptr_t)DEFAULT_DMIBAR | 1); |
| pci_write_config32(D0F0, PMIOBAR, (uintptr_t)0x400 | 1); |
| |
| /* Set C0000-FFFFF to access RAM on both reads and writes */ |
| pci_write_config8(D0F0, PAM0, 0x30); |
| pci_write_config8(D0F0, PAM1, 0x33); |
| pci_write_config8(D0F0, PAM2, 0x33); |
| pci_write_config8(D0F0, PAM3, 0x33); |
| pci_write_config8(D0F0, PAM4, 0x33); |
| pci_write_config8(D0F0, PAM5, 0x33); |
| pci_write_config8(D0F0, PAM6, 0x33); |
| |
| printk(BIOS_DEBUG, " done.\n"); |
| } |
| |
| void pineview_early_initialization(void) |
| { |
| /* Print some chipset specific information */ |
| printk(BIOS_DEBUG, "Intel Pineview northbridge\n"); |
| |
| /* Setup all BARs required for early PCIe and raminit */ |
| pineview_setup_bars(); |
| |
| /* Miscellaneous set up */ |
| early_misc_setup(); |
| |
| /* Change port80 to LPC */ |
| RCBA32(GCS) &= (~0x04); |
| RCBA32(0x2010) |= (1 << 10); |
| } |