| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #ifndef AMD_BLOCK_LPC_H |
| #define AMD_BLOCK_LPC_H |
| |
| #include <types.h> |
| |
| /* PCI registers for D14F3 */ |
| #define LPC_PCI_CONTROL 0x40 |
| #define LEGACY_DMA_EN BIT(2) |
| #define VW_ROM_SHARING_EN BIT(3) |
| #define EXT_ROM_SHARING_EN BIT(4) |
| |
| #define LPC_IO_PORT_DECODE_ENABLE 0x44 |
| #define DECODE_ENABLE_PARALLEL_PORT0 BIT(0) |
| #define DECODE_ENABLE_PARALLEL_PORT1 BIT(1) |
| #define DECODE_ENABLE_PARALLEL_PORT2 BIT(2) |
| #define DECODE_ENABLE_PARALLEL_PORT3 BIT(3) |
| #define DECODE_ENABLE_PARALLEL_PORT4 BIT(4) |
| #define DECODE_ENABLE_PARALLEL_PORT5 BIT(5) |
| #define DECODE_ENABLE_SERIAL_PORT0 BIT(6) |
| #define DECODE_ENABLE_SERIAL_PORT1 BIT(7) |
| #define DECODE_ENABLE_SERIAL_PORT2 BIT(8) |
| #define DECODE_ENABLE_SERIAL_PORT3 BIT(9) |
| #define DECODE_ENABLE_SERIAL_PORT4 BIT(10) |
| #define DECODE_ENABLE_SERIAL_PORT5 BIT(11) |
| #define DECODE_ENABLE_SERIAL_PORT6 BIT(12) |
| #define DECODE_ENABLE_SERIAL_PORT7 BIT(13) |
| #define DECODE_ENABLE_AUDIO_PORT0 BIT(14) |
| #define DECODE_ENABLE_AUDIO_PORT1 BIT(15) |
| #define DECODE_ENABLE_AUDIO_PORT2 BIT(16) |
| #define DECODE_ENABLE_AUDIO_PORT3 BIT(17) |
| #define DECODE_ENABLE_MIDI_PORT0 BIT(18) |
| #define DECODE_ENABLE_MIDI_PORT1 BIT(19) |
| #define DECODE_ENABLE_MIDI_PORT2 BIT(20) |
| #define DECODE_ENABLE_MIDI_PORT3 BIT(21) |
| #define DECODE_ENABLE_MSS_PORT0 BIT(22) |
| #define DECODE_ENABLE_MSS_PORT1 BIT(23) |
| #define DECODE_ENABLE_MSS_PORT2 BIT(24) |
| #define DECODE_ENABLE_MSS_PORT3 BIT(25) |
| #define DECODE_ENABLE_FDC_PORT0 BIT(26) |
| #define DECODE_ENABLE_FDC_PORT1 BIT(27) |
| #define DECODE_ENABLE_GAME_PORT BIT(28) |
| #define DECODE_ENABLE_KBC_PORT BIT(29) |
| #define DECODE_ENABLE_ACPIUC_PORT BIT(30) |
| #define DECODE_ENABLE_ADLIB_PORT BIT(31) |
| |
| #define LPC_IO_OR_MEM_DECODE_ENABLE 0x48 |
| #define LPC_WIDEIO2_ENABLE BIT(25) |
| #define LPC_WIDEIO1_ENABLE BIT(24) |
| #define DECODE_IO_PORT_ENABLE6 BIT(23) |
| #define DECODE_IO_PORT_ENABLE5 BIT(22) |
| #define DECODE_IO_PORT_ENABLE4 BIT(21) |
| #define DECODE_MEM_PORT_ENABLE1 BIT(20) |
| #define DECODE_IO_PORT_ENABLE3 BIT(19) |
| #define DECODE_IO_PORT_ENABLE2 BIT(18) |
| #define DECODE_IO_PORT_ENABLE1 BIT(17) |
| #define DECODE_IO_PORT_ENABLE0 BIT(16) |
| #define LPC_SYNC_TIMEOUT_COUNT_MASK (0xff << 8) |
| #define LPC_SYNC_TIMEOUT_COUNT_ENABLE BIT(7) |
| #define LPC_DECODE_RTC_IO_ENABLE BIT(6) |
| #define DECODE_MEM_PORT_ENABLE0 BIT(5) |
| #define LPC_WIDEIO0_ENABLE BIT(2) |
| #define DECODE_ALTERNATE_SIO_ENABLE BIT(1) |
| #define DECODE_SIO_ENABLE BIT(0) |
| #define LPC_SELECT_SIO_4E4F 1 |
| #define LPC_SELECT_SIO_2E2F 0 |
| #define WIDEIO_RANGE_ERROR -1 |
| |
| /* Assuming word access to higher word (register 0x4a) */ |
| #define LPC_IO_OR_MEM_DEC_EN_HIGH 0x4a |
| #define LPC_WIDEIO2_ENABLE_H BIT(9) |
| #define LPC_WIDEIO1_ENABLE_H BIT(8) |
| #define DECODE_IO_PORT_ENABLE6_H BIT(7) |
| #define DECODE_IO_PORT_ENABLE5_H BIT(6) |
| #define DECODE_IO_PORT_ENABLE4_H BIT(5) |
| #define DECODE_IO_PORT_ENABLE3_H BIT(3) |
| #define DECODE_IO_PORT_ENABLE2_H BIT(2) |
| #define DECODE_IO_PORT_ENABLE1_H BIT(1) |
| #define DECODE_IO_PORT_ENABLE0_H BIT(0) |
| |
| #define LPC_MEM_PORT1 0x4c |
| #define ROM_PROTECT_RANGE0 0x50 |
| #define ROM_BASE_MASK 0xfffff000 /* bits 31-12 */ |
| #define ROM_RANGE_WP BIT(10) |
| #define ROM_RANGE_RP BIT(9) |
| #define RANGE_UNIT BIT(8) |
| #define RANGE_ADDR_MASK 0x000000ff /* Range defined by bits 7-0 */ |
| #define ROM_PROTECT_RANGE_REG(n) (ROM_PROTECT_RANGE0 + (4 * n)) |
| #define MAX_ROM_PROTECT_RANGES 4 |
| #define LPC_MEM_PORT0 0x60 |
| |
| /* Register 0x64 is 32-bit, composed by two 16-bit sub-registers. |
| For ease of access, each sub-register is declared separately. */ |
| #define LPC_WIDEIO_GENERIC_PORT 0x64 |
| #define LPC_WIDEIO1_GENERIC_PORT 0x66 |
| #define ROM_ADDRESS_RANGE1_START 0x68 |
| #define ROM_ADDRESS_RANGE1_END 0x6a |
| #define ROM_ADDRESS_RANGE2_START 0x6c |
| #define ROM_ADDRESS_RANGE2_END 0x6e |
| |
| #define LPC_ALT_WIDEIO_RANGE_ENABLE 0x74 |
| #define LPC_ALT_WIDEIO2_ENABLE BIT(3) |
| #define LPC_ALT_WIDEIO1_ENABLE BIT(2) |
| #define LPC_ALT_WIDEIO0_ENABLE BIT(0) |
| |
| #define LPC_MISC_CONTROL_BITS 0x78 |
| #define LPC_NOHOG BIT(0) |
| |
| #define LPC_TRUSTED_PLATFORM_MODULE 0x7c |
| #define TPM_12_EN BIT(0) |
| #define TPM_LEGACY_EN BIT(2) |
| |
| #define LPC_WIDEIO2_GENERIC_PORT 0x90 |
| |
| /* LPC register 0xb8 is DWORD, here there are definitions for byte |
| access. For example, bits 31-24 are accessed through byte access |
| at register 0xbb. */ |
| #define LPC_ROM_DMA_EC_HOST_CONTROL 0xb8 |
| #define SPI_FROM_HOST_PREFETCH_EN BIT(24) |
| #define SPI_FROM_USB_PREFETCH_EN BIT(23) |
| |
| #define LPC_HOST_CONTROL 0xbb |
| #define PREFETCH_EN_SPI_FROM_HOST BIT(0) |
| #define T_START_ENH BIT(3) |
| |
| /* Clear all decoding to the LPC bus and erase any range registers associated |
| * with the enable bits. */ |
| void lpc_disable_decodes(void); |
| /* LPC is typically enabled very early, but this function is last opportunity */ |
| void soc_late_lpc_bridge_enable(void); |
| void lpc_enable_port80(void); |
| void lpc_enable_pci_port80(void); |
| void lpc_enable_decode(uint32_t decodes); |
| /* addr = index/data to enable: LPC_SELECT_SIO_2E2F or LPC_SELECT_SIO_4E4F */ |
| void lpc_enable_sio_decode(const bool addr); |
| uintptr_t lpc_spibase(void); |
| void lpc_tpm_decode(void); |
| void lpc_tpm_decode_spi(void); |
| void lpc_enable_rom(void); |
| void lpc_enable_spi_prefetch(void); |
| void lpc_disable_spi_rom_sharing(void); |
| |
| /** |
| * @brief Find the size of a particular wide IO |
| * |
| * @param index = index of desired wide IO |
| * |
| * @return size of desired wide IO |
| */ |
| uint16_t lpc_wideio_size(int index); |
| /** |
| * @brief Identify if any LPC wide IO is covering the IO range |
| * |
| * @param start = start of IO range |
| * @param size = size of IO range |
| * |
| * @return Index of wide IO covering the range or error |
| */ |
| int lpc_find_wideio_range(uint16_t start, uint16_t size); |
| /** |
| * @brief Program a LPC wide IO to support an IO range |
| * |
| * @param start = start of range to be routed through wide IO |
| * @param size = size of range to be routed through wide IO |
| * |
| * @return Index of wide IO register used or error |
| */ |
| int lpc_set_wideio_range(uint16_t start, uint16_t size); |
| |
| uintptr_t lpc_get_spibase(void); |
| |
| /* |
| * Perform early initialization for LPC: |
| * 1. Enable LPC controller |
| * 2. Disable any LPC decodes |
| * 3. Set SPI Base which is the MMIO base for both SPI and eSPI controller (if supported by |
| * platform). |
| */ |
| void lpc_early_init(void); |
| |
| /* |
| * Sets MMIO base address for SPI controller and eSPI controller (if supported by platform). |
| * |
| * eSPI base = SPI base + 0x10000 |
| */ |
| void lpc_set_spibase(uint32_t base); |
| |
| /* Enable SPI ROM (SPI_ROM_ENABLE, SPI_ROM_ALT_ENABLE) */ |
| void lpc_enable_spi_rom(uint32_t enable); |
| |
| #endif /* AMD_BLOCK_LPC_H */ |