src/mainboard/intel/dq67sw/devicetree.cb

# SPDX-License-Identifier: GPL-2.0-or-later

chip northbridge/intel/sandybridge
	register "spd_addresses" = "{0x50, 0x51, 0x52, 0x53}"
	device domain 0 on
		subsystemid 0x8086 0x2008 inherit
		device ref host_bridge on end	# Host bridge
		device ref peg10 on end		# PEG
		device ref igd on end		# iGPU

		chip southbridge/intel/bd82x6x	# Intel Series 6 Cougar Point PCH
			register "gen1_dec" = "0x000c0291"
			register "sata_interface_speed_support" = "0x3"
			register "sata_port_map" = "0x3f"
			register "spi_lvscc" = "0x2005"
			register "spi_uvscc" = "0x2005"
			device ref mei1 on end		# Management Engine Interface 1
			device ref me_ide_r on end	# Management Engine IDE-R
			device ref me_kt on end		# Management Engine KT
			device ref gbe on end		# Intel Gigabit Ethernet
			device ref ehci2 on end		# USB2 EHCI #2
			device ref hda on end		# High Definition Audio
			device ref pcie_rp1 on end	# PCIe Port #1
			device ref pcie_rp5 on end	# PCIe Port #5
			device ref pcie_rp7 on end	# PCIe Port #7
			device ref ehci1 on end		# USB2 EHCI #1
			device ref pci_bridge on end	# PCI bridge
			device ref lpc on		# LPC bridge
				chip superio/winbond/w83667hg-a	# Super I/O
					device pnp 2e.0 off end		# FDC
					device pnp 2e.1 off end		# LPT1
					device pnp 2e.2 on		# COM1
						io 0x60 = 0x3f8
						irq 0x70 = 4
					end
					device pnp 2e.3 off end		# COM2
					device pnp 2e.5 on		# PS/2 keyboard & mouse
						io 0x60 = 0x60
						io 0x62 = 0x64
						irq 0x70 = 1
						irq 0x72 = 12
					end
					device pnp 2e.106 off end	# SPI1 (CIR?)
					device pnp 2e.107 off end	# GPIO6
					device pnp 2e.207 off end	# GPIO7
					device pnp 2e.307 off end	# GPIO8
					device pnp 2e.407 off end	# GPIO9
					device pnp 2e.8 off end		# WDT
					device pnp 2e.108 off end	# GPIO1
					device pnp 2e.9 off end		# GPIO2
					device pnp 2e.109 off end	# GPIO3
					device pnp 2e.209 off end	# GPIO4
					device pnp 2e.309 off end	# GPIO5
					device pnp 2e.a on end		# ACPI
					device pnp 2e.b on		# HW Monitor
						io 0x60 = 0x290
						irq 0x70 = 0
					end
					device pnp 2e.c on end		# PECI
					device pnp 2e.d off end		# VID_BUSSEL
					device pnp 2e.f on end		# GPIO_PP_OD
				end
			end
			device ref sata1 on end		# SATA (AHCI)
			device ref smbus on end		# SMBus
		end
	end
end